• 환경영향평가
• /
• 제20권2호
• /
• pp.217-226
• /
• 2011

This paper was inspired by the fact that Real-time Traffic Information Service could play a key role in reducing incomplete combustion time remarkably since it can provide traffic jam information in real-time basis. Emission characteristics of experimental engines were studied with variable travel distances and speed of car in terms of traffic information provided. 12 Km distance road of Susung district in Daegu is taken as an experimental area to examine this new approach. The emission was tested while the driving was done at 8 AM, 3 PM, 6 PM which represents various traffic conditions. The reduced emission has been measured for a travel distance running at different loads (conventional shortest route and Real-time Traffic Information) and various loads (CO, VOC and NOx) are all inventoried and calculated in terms of existing emission factors. The emission has been shown to reduce linearly with travel distance : carbon monoxide (20.56%), VOC (29.21%), NOx(8.86%).

• 한국정밀공학회지
• /
• 제21권6호
• /
• pp.28-34
• /
• 2004

The old technique of sandblasting which has been used for decoration of glass surface has recently been developed into a powder blasting technique for brittle materials such as glass, silicon and ceramics, capable of producing micro structures larger than 100${\mu}{\textrm}{m}$. In this study, we introduced oblique powder blasting, and investigated the effect of the impacting angle of particles, the scanning times and the stand-off distance on the surface roughness and the weight-loss rate of samples with no mask, and the wall profile and overetching of samples with different mask pattern in powder blasting of soda-lime glass. The varying parameters were the different impact angles between 50$^{\circ}$ and 90$^{\circ}$, scanning times of nozzle up to 40 and the stand-off distances 70mm and 100mm. The widths of mask pattern were 0.2mm, 0.5mm and 1mm. The powder was alumina sharp particles, WA #600. The mass flow rate of powder during the erosion test was fixed constant at 175g/min and the blasting pressure of powder at 0.2Mpa.

• Ecology and Resilient Infrastructure
• /
• 제7권3호
• /
• pp.160-170
• /
• 2020

철도와 도로는 대표적인 선형사업으로, 전국적으로 철도망과 도로망이 확대되고 있는 추세이며, 환경에 미치는 영향을 최소화하기 위해 철도와 도로의 평행노선에 따른 생태계 단절을 최대한 지양하고 있다. 본 연구에서는 우선적으로 철도와 도로개발 시, 환경에 미치는 영향을 살펴보기 위한 각 사업의 중점평가항목에 대한 비교·분석을 통해 차이점과 특징을 고찰하였다. 그 결과, 도로 개발은 철도사업과는 달리 효율적인 토지이용계획 수립에 대한 사항과 토양 보호를 중점평가항목으로 제시하고 있다. 본 연구에서는 철도 노선이 도로와 인접하게 될 때의 환경적 영향을 살펴보기 위한 구체적인 평가 항목과 기준이 제시되어 있지 않음에 따라, 관련 문헌을 검토하여 총 8개 평가 항목을 제시하였다. 특히, 계획의 적정성과 입지타당성을 살펴보기 위한 전략환경영향평가 단계에서 기존의 도로에 철도가 인접하게 될 때 미치는 환경적 영향을 사전에 검토할 수 있는 이격거리 기준을 제안하고자, 기 운영 중인 철도 노선을 대상으로 도로와의 이격거리를 살펴보았으며, 환경생태적 영향을 최소화하기 위해 검토해야 할 이격거리로 200 m 이내일 것을 제시하였다. 본 연구 결과는 철도와 도로가 인접할 때 환경생태적 영향을 최소화할 수 있는 대안노선을 검토하는 사업계획 단계에서 근거 자료로 활용될 수 있을 것이다.

• 한국운동역학회지
• /
• 제17권1호
• /
• pp.91-97
• /
• 2007

The purpose of this study was to investigate the changes of various balls velocity under the different surface conditions after impact. For this study, four different balls were used which are golf ball, tang-tang ball, table tennis ball, and iron ball. And two different types of ground conditions were used which are artificial grass green and glass green. Movements of putter head and ball were recorded with 2 HD video cameras(60 Hz, 1/500s shutter speed). Small size control object($18.5cm{\times}18.5cm{\times}78.5cm$) was used in this study. To transfer the same amount of kinetic energy to the ball, pendulum putting machine was used. Analyzing the process of impact and the ball movement, a putter was digitized the whole movement but the ball was digizited within the 50cm movement. Velocities were calculated by the first central difference method(Hamill & Knutzen, 1995). Putter head velocities were about 112.2cm/s-116.2cm/s at impact. Maximum ball velocities were appeared 0.08s-0.10s after impact no matter what the ground conditions are. Table tennis ball recorded higher ball velocities than the other ball velocities and iron ball recorded the lowest ball velocity in this group. But Table tennis ball was influenced with the frictional force and immediately was decreased at the artificial grass green condition. If an object is received the kinetic energy under the static condition(v=0cm/s), the object recorded the maximum velocity shortly after the impact and then decreased the velocity because of the frictional force. The ball distance from the start position to the peak velocity position is about 6cm-10cm under the 112.2cm/s-116.2cm/s putting velocity with putter. 0.25 seconds later after impact balls were placed 40cm distance from the original position except iron ball. In this study, ball moving distances were too short therefore it was not possible to investigate the reactions after the translational force is disappeared. Rotational force would play a major role at the end of the ball movement. Future study must accept two things. One is long distance movement of ball and the other is balanced ground. Three-piece ball is a good item to investigate the golf ball movement on the different surface conditions.

• 터널과지하공간
• /
• 제31권1호
• /
• pp.52-65
• /
• 2021

본 연구에서는 멕시코시티 외곽에 있는 프로판 저장기지인 PEMIX 터미널에서 발생한 프로판 누출에 따른 증기운 폭발을 분석하였다. 누출된 4750 kg의 프로판에 대한 TNT 등가량은 9398 kg으로 평가되었다. 폭원으로부터 40~400 (m) 떨어진 지점에서의 최대과압, 양의 압력 지속시간, 충격량과 같은 폭발변수를 TNT 등가법과 다중에너지법을 적용하여 구하였다. 폭발 변수들을 이용하여 구한 프로빗 함수를 적용하여 폐 손상, 고막 파열, 머리 충격, 전신 전위 충격으로 인한 손상 확률을 평가하였다. 고려한 모든 거리에서 다중에너지법을 이용하여 구한 최대과압이 TNT 등가법을 적용하여 구한 최대과압보다 큰 것으로 나타났으나, 200 m 이후 지점부터는 큰 차이가 없는 것으로 평가되었다. 다중에너지법에 의해 구해진 최대과압을 적용하여 구조물 손상 범위를 평가한 결과 폭원으로부터 100 m 이내에 있는 구조물의 경우 완전히 붕괴될 것으로 예측되고, 400 m 떨어진 구조물의 유리창도 거의 파손될 것으로 추정되었다. 폐 손상에 의한 사망 확률은 충격파 진행방향으로 위치하고 있는 인체의 자세에 따라 달라지는 것으로 나타났으며, 인체 주변에 반사면이 있는 경우 사망 확률이 가장 큰 것으로 평가되었다. 충격파가 폐 손상, 고막 파열, 머리 충격, 전신 전위 충격에 미치는 영향을 평가한 결과 전신 전위 충격 < 폐 손상 < 고막파열 < 머리 충격 순으로 영향을 미치는 것으로 나타났다.

• Industrial Engineering and Management Systems
• /
• 제11권2호
• /
• pp.148-154
• /
• 2012

Micro Electric Vehicles are considered as a solution for reducing $CO_2$ emissions, however, it is difficult to evaluate its impact in a local community when it has been introduced. In this study, we evaluated how to spread the Micro EV within the community, using the utility derived from a multinomial logit model, and analyze the effect on $CO_2$ emissions. The householder's utility model is based on an investigation about Kiryu citizen's activities of shopping, transportation methods, etc. Using the geographic information system, we get the distances of each householder and the stores, and estimate a multinomial logit model about the combination choices of shopping stores and transportation method.

• 한국유체기계학회 논문집
• /
• 제15권4호
• /
• pp.33-41
• /
• 2012

In the present work, a parametric study on double-jet film-cooling has been carried out to enhance the film-cooling effectiveness using three-dimensional Reynolds-averaged Navier-Stokes analysis. The shear stress transport turbulence model is used as the turbulence closure. The lateral ejection angles and the lateral and streamwise distance between the centers of the cooling holes are chosen as the geometric parameters. The spatially averaged film-cooling effectiveness averaged over an area of 8 hole diameters in width and 30 hole diameters in streamwise length is used to evaluate the performance of film-cooling. The parameter of the lateral distance has the largest impact on the film cooling effectiveness compared to the others. On the other hand, the parameter of streamwise distance gives the least influence on the film cooling effectiveness.

• Corrosion Science and Technology
• /
• 제7권2호
• /
• pp.125-129
• /
• 2008

Results of corrosion testing for different grades of titanium, copper, zinc, alluminium alloys and steels after two years of outdoor exposure under humid tropical urban and marine conditions have been presented and discussed. Mass loss and corrosion product characteristics for the exposed specimens at Hanoi testing site with high humidity and Nhatrang marine stations (at 100 and 1,000 meters distances from sea) with different airborne salinities (35.9 and $90.0mg/m^2.d$ respectively) have been selected for investigation. From time dependence of the specimen mass loss and corrosion product characteristics, the strong influence of environmental parameters upon durability for the investigated metals and alloys has been demonstrated. Only titanium alloys show high resistance to the marine conditions. All the other specimens (copper, zinc, alluminium alloys and steels) have been underwent strong deterioration under influence of aerosol salinity. Results of corrosion products analysis have been also presented for characterization of environmental impact on the metal degradation processes.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.296-301
• /
• 2002

In this study, we investigated the machinability of machinable ceramics which were developed by a research lab. of Inha Univ., Korea. The effect of the nozzle scanning times, the size of patterns and compositions of BN in ceramics on the erosion depth of samples with no mask and samples with three different mask pattern in powder blasting of machinable ceramics. The blasting conditions were the impact angles 90$^{\circ}$, scanning times of noble up to 30 and the stand-off distances 100mm. The widths of mask pattern were 0.1mm, 0.5mm and 1 mm. The powder was alumina sharp particles, WA#600. The mass flow rate of powder during the erosion test was fixed constant at 150g/min and the blasting pressure of powder at 0.25Mpa

• 소음진동
• /
• 제2권1호
• /
• pp.49-59
• /
• 1992

The motion analysis of a translation device driven by a piezoelectric actuator is performed to identify the mechanics of impact drive mechanism and to find the maximum speed waveform. The translation device is modeled as a semidefinite two-degree-of-freedom system. The motion analysis includes effects of friction force between moving mass and contact surface, dynamics of voltage amplifier and piezoelectric elements, and hysteresis of piezoelectric actuator. Base on the model, simulation studies are carried out and then compared with experimental results. It is found that the error between moving distances obtained by analysis and experiment is less than 15% and that the actual motion of moving mass is well predicted by the analytical work, finally, precision positioning experiments are carried out by using a proximity sensor as a feedback sensor. Position control of moving mass is initiated by the maximum speed waveform and finely tuned by the scaled down waveform so that accurate positioning is accomplished within the resolution of the sensor.