Browse > Article

Machinability in Oblique Powder Blasting of Glass  

박동삼 (인천대학교 기계공학과)
서태일 (인천대학교 기계공학과)
Publication Information
Abstract
The old technique of sandblasting which has been used for decoration of glass surface has recently been developed into a powder blasting technique for brittle materials such as glass, silicon and ceramics, capable of producing micro structures larger than 100${\mu}{\textrm}{m}$. In this study, we introduced oblique powder blasting, and investigated the effect of the impacting angle of particles, the scanning times and the stand-off distance on the surface roughness and the weight-loss rate of samples with no mask, and the wall profile and overetching of samples with different mask pattern in powder blasting of soda-lime glass. The varying parameters were the different impact angles between 50$^{\circ}$ and 90$^{\circ}$, scanning times of nozzle up to 40 and the stand-off distances 70mm and 100mm. The widths of mask pattern were 0.2mm, 0.5mm and 1mm. The powder was alumina sharp particles, WA #600. The mass flow rate of powder during the erosion test was fixed constant at 175g/min and the blasting pressure of powder at 0.2Mpa.
Keywords
Powder blasting; Impact angle; Glass; Surface roughness; Weight-loss rate; Overetching; Wall profile; Wall profile;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Ligthart, H. J., Slikkerveer, P. J., Verd, F.H.I., Swinkels, P.H.W., Zonneveld, M. H., 'Glass and Glass Machining in Zeus Panels,' Philips J. Res., Vol. 50, No. 3/4, pp. 475-499, 1996   DOI   ScienceOn
2 Lawn, B. R., Fracture of Blittle Solids, 2nd edn., Cambridge Univ., Cambridge, UK, pp. 302-304, 1993
3 Bouzid, S., Bouaouadja, N., 'Effect of impact angle on glass surfaces eroded by sand blasting,' J. of the European Ceramics Society, 20, pp. 481-488, 2000   DOI   ScienceOn
4 Slikkerveer, P. J., Bouten, P.C.P., Veld, F.H.I., Scholten, H., 'Erosion and damage by sharp particles,' Wear, 217, pp. 237-250, 1998   DOI   ScienceOn
5 Kim, K. H., Choi, J. S., Park, D. S., 'Effect of Nozzle Scanning in Micro Grooving of Glass by Powder Blasting,' J. of the Korean Society of Mechanical Engineering, Vol. 26, No. 7, pp. 1280-1287, 2002   과학기술학회마을   DOI
6 Park, K. H., Oh, Y. T., Park, D. S., 'Mechanical Etching of Micro Pocket by Powder Blasting,' J. of the Korean Society of Precision Engineering, Vol. 19, No. 1, pp. 219-226, 2002   과학기술학회마을
7 Evans, A. G., Gulden, M. E., Rosenblatt, M., 'Impact Damage in Brittle Materials in the Elastic=plastic Response Regime,' Proc. R. Soc. London A 361, pp. 343-365, 1978   DOI
8 Choi, J. S., Park, K. H., Park, D. S., 'Micro Grooving of Glass Using Micro Abrasive Jet Machining,' J. of the Korean Society of Precision Engineering, Vol. 18, No. 10, pp. 178-183, 2001   과학기술학회마을
9 Kruusing, A., Lappavuori, S., Uusimaki, A., Uusimaki, M., 'Rapid prototyping of silicon structures by aid of laser and abrasive-jet machining,' Part of the Symposium on Design, Test, and Microfabrication of MEMS and MOEMS, Paris, France, SPIE, Vol. 3680, pp. 870-878, 1999   DOI
10 Belloy ,E., Sayah, A., Gijs, M.A.M., 'Oblique powder blasting for three-dimensional micromachining of brittle materials,' Sensor and Actuators A 2998, pp. 1-6, 2001   DOI   ScienceOn
11 Verma, A. P., Lal, G. K., 'A Theoretical Study of Erosion Phenomenon in Abrasive Jet Mcahining,' Transactions of the ASME, Vol. 118, pp. 564-570, 1996   DOI   ScienceOn
12 Wensink, H., Berenshot, U. W., Jan seu, H. V. Elwenspoek, M. C., 'High Resolution Powder Blast Micromachining,' Pro.of the IEEE Micro Electro Mechanical Systems (MEMS) 2000, pp. 769-774, 2000   DOI
13 Belloy, E., Thurre, S., Walckiers, E., Sayah, A., Gijs, M.A.M., 'The introduction of powder blasting for sensor and microsystem applications,' Sensor and Actuators 84, pp. 330-337, 2000   DOI   ScienceOn
14 Solignac, D., Sayah, A., Constantin, S.. Freitag, R. Gijs, M.A.M., 'Powder blasting for the realization of microchips for bio-analytic applications,' Sensor and Actuators A 3003, pp. 1-6, 2001   DOI   ScienceOn
15 Park, D. S., Micromachining of the injection mold for TFT-LCD LGP with dot pattern and diffusion function, KOSEF Report No. R05-2002-000-00421-0, 2002