• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2509-2512
• /
• 2005

In this paper, a position control scheme of the ink droplet is presented for the high image quality and print speed inkjet printer. The proposed scheme estimates the impact position and compensates it by control of the fire strobe time based on the dynamic equations describing the moving trajectory of the ink droplet. Compared to the conventional fire strobe control which is based on the simple synchronization the fire strobe with the position signal of the inkjet nozzle, the proposed control scheme provides more accurate impact position control during the carrier is moving with accelerated or decelerated speed as well as constant speed. The availability of printing during the acceleration and deceleration states of the carrier moving enables the print speed up and the frame size down which means the cost down.

• 한국도로학회논문집
• /
• 제9권3호
• /
• pp.39-50
• /
• 2007

원형 혹은 H형 단면의 표지판지주에 소형차가 충돌할 때 차량 및 지주의 거동을 확인하기 위하여 Barrier VII 프로그램을 이용한 시뮬레이션을 실시하였다. 이 프로그램은 연성 베리어에 충돌하는 차량의 운동과 베리어의 변위를 해석하는 프로그램이나, 지주를 수평 빔 요소로 하고 각 노드에 강성을 조절한 기둥 요소로 연결함으로써 소형지주에 대한 충돌해석이 가능함을 보였다. 0.9ton 소형차가 기초와 강결된 파이프형태의 소형 지주에 30km/h, 60km/h, 70km/h 110km/h의 속도로 충돌하는 경우, 0.9ton 소형차와 1.35ton 중형차가 기초에 강결된 H형 단면 지주에 110km/h의 속도로 충돌하는 경우, 그리고 0.9ton 소형차가 분리되는(slip base) 형태로 기초에 연결된 파이프형태의 소형 지주에 110km/h의 속도로 충돌하는 경우 등 총 7가지 경우에 대한 시뮬레이션을 실시하여 지주의 변형과 충돌차량의 거동을 분석하였다. 시뮬레이션을 통하여 고속충돌 시 기초에 강결 된 원형지주의 경우 과다한 휨 변형으로 표지판과 차량 전면부와의 충돌위험성이 있고 H형 지주와 같이 비교적 큰 표지판용 지주는 소형차 충돌 시 지주의 변형은 거의 없고 차량에 가해지는 충격력, 지주가 과다하게 차체 안으로 침투할 위험성이 크다는 사실과 breakaway 장치로 단부처리를 하는 경우 위험이 줄어들 수 있음을 확인하였다.

• 자동차안전학회지
• /
• 제12권1호
• /
• pp.39-45
• /
• 2020

The express/intercity bus models have been developing for wheelchair users to provide the preferable long-distance travels by the Korean government research. In the previous studies, evaluation method was set up for the wheelchair users' safety and the study for wheelchair occupants' safety was performed under various crash loadings mimic to real accidents, frontal crash, side impact and rollover, etc. This study was focused on the evaluation of occupant behaviors and injuries (head and chest) during vehicle impact loading cases in order to ensure the safety of wheelchair passengers in the bus. The occupant response and belt loading data during the sled FE simulation were compared with those of the sled test. The simulation results showed overall safety tolerances of wheelchair occupants under the severe frontal deceleration, side impact loading based on the FMVSS 214 configuration and bus rollover loading.

• Journal of Advanced Research in Ocean Engineering
• /
• 제4권4호
• /
• pp.146-162
• /
• 2018

The unsteady problem of a rigid body impact onto a floating plate is studied. Both the plate and the water are at rest before impact. The plate motion is caused by the impact force transmitted to the plate through an elastic layer with viscous damping on the top of the plate. The hydrodynamic force is calculated by using the second-order model of plate impact by Iafrati and Korobkin (2011). The present study is concerned with the deceleration experienced by a rigid body during its collision with a floating object. The problem is studied also by a fully-nonlinear computational-fluid-dynamics method. The elastic layer is treated with a moving body-fitted grid, the impacting body with an immersed boundary method, and a discrete-element method is used for the contact-force model. The presence of the elastic layer between the impacting bod- ies may lead to multiple bouncing of them, if the bodies are relatively light, before their interaction is settled and they continue to penetrate together into the water. The present study is motivated by ship slamming in icy waters, and by the effect of ice conditions on conventional free-fall lifeboats.

• 자동차안전학회지
• /
• 제6권2호
• /
• pp.55-60
• /
• 2014

To verify the performance of roadside safety facilities, strength and occupant protection test are performed by evaluation criteria. Strength test use a truck and occupant protection test use a sedan. Strength perfomance is analyzed pass rate by post lateral resistance of the safety barrier. Occupant protection performance is analyzed from THIV(Theoretical Head Impact Velocity) and PHD(Post-impact Head Deceleration) by crash cushion test.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1602-1606
• /
• 2008

In the Rail Safety Regulations article 16, deceleration rate in the survival spaces should be limited as far as is practicable to 5g, and shall not be more than 7.5g. As it is impractical to evaluate complete train behaviour by testing, the achievement of the objectives shall be validated by dynamic simulations corresponding to the reference collisions scenarios. But initial design and evaluation procedure, impact dynamics model which classified 1D and 2D is more useful than full scale model. This paper presents acceleration response characteristics between 1D and 2D dynamics model under head-on collision in standard collision scenarios.

• 한국운동역학회지
• /
• 제20권2호
• /
• pp.175-182
• /
• 2010

The purpose of this study was to evaluate the biomechanical effect of sports taping on the lower limb during drop landing. Twelve male university students who have no musculoskeletal disorder were recruited as the subjects. Principal strain, median frequency, vertical GRF, loading rate, angular velocity and resultant joint moment were determined for each trial. For each dependent variable, paired t-test was performed to test if significant difference existed between taped and untaped conditions(p<.05). The results showed that principal strain of the thigh and the shank in taping group were significantly less than those found in control group. These indicated that sports taping may prevent excessive mechanical strain caused by impact force during the deceleration phase. Flexion(-)-extension(+) and varus(-)-valgus(+) resultant joint moment of the knee joint in taping group were greater than corresponding value for control group. It seems that extensor muscle of the knee joint were not only supported by sports taping during knee flexion but also sports taping is effective for minimizing the possibility of injury.

• 자동차안전학회지
• /
• 제15권1호
• /
• pp.55-62
• /
• 2023

In this study, a chest deflection is predicted by introducing a deep learning technique with the results of the frontal impact of the USNCAP conducted for 110 car models from MY2018 to MY2020. The 120 data are divided into training data and test data, and the training data is divided into training data and validation data to determine the hyperparameters. In this process, the deceleration data of each vehicle is averaged in units of 10 ms from crash pulses measured up to 100 ms. The performance of the deep learning model is measured by the indices of the mean squared error and the mean absolute error on the test data. A DNN (Deep Neural Network) model can give different predictions for the same hyperparameter values at every run. Considering this, the mean and standard deviation of the MSE (Mean Squared Error) and the MAE (Mean Absolute Error) are calculated. In addition, the deep learning model performance according to the inclusion of CVW (Curb Vehicle Weight) is also reviewed.

• 한국포장학회지
• /
• 제12권1호
• /
• pp.35-40
• /
• 2006

Cushioning systems, which are cushion material and its designed configuration, are important to protect fragile items since they act as buffers between the impact force and the fragile product. As cushioning materials, several plastic foams are commonly used in industry. However, the utilization of the plastic material has been causing a solid waste problem and pollution. Thus, as an alternative cushion material to the plastic foams, a corrugated cushion, which is considered environmentally friendly and cheap material, was put into drop tests and its impact shock attenuation was investigated. Flat and free drop data were recorded and compared to the dynamic shock of EPS cushion. In addition, the mathematical model of the shock attenuation of the corrugated cushion was developed. The result showed that the corrugated cushion gave an excellent protection for items that were subjected to the limited number of drops. There was no significant difference of the shock absorbing ability between the EPS and corrugated cushions. Energy density model of cushioning material successfully explained the mechanical behavior and fatigue of the corrugated cushions.

• 한국전산구조공학회논문집
• /
• 제33권4호
• /
• pp.255-261
• /
• 2020

본 논문은 충격을 줄이기 위해 효과적인 충격완충장치를 구성하는 방법을 제안했다. 기존의 충격완충장치는 폴리에틸렌으로만 만들어졌지만, 새로운 충격완충장치는 외측에는 폴리에틸렌, 내측에는 고밀도 재료로 구성하였다. 충격은 내측과 외측 물질 사이의 밀도 차이가 더 클 때 줄어들었다. 2층 구조의 외측으로 설계하기 위해 알루미늄, 티타늄, 구리를 선택하였다. 가장 밀도가 높은 구리에서는 충격 감소가 가장 좋았으며, 기존 충격완충장치보다 최대 감가속도는 43%, 충격량은 51% 감소하였다. 4층, 6층 충격완충장치의 경우, 충격량은 줄였지만, 최대 감가속도는 증가하였다. 신관은 가장 큰 충격으로부터 살아남아야 하며 나머지 충격파는 임계값을 초과하지 않으므로, 본 논문은 폴리에틸렌-구리를 사용한 2층 구조용 충격완충장치를 제안하였다.