• Tunnel and Underground Space
• /
• v.22 no.6
• /
• pp.393-402
• /
• 2012

A behavior of ridge-cut rock slope had been monitored by installing inclinometers and regional slope movement toward rear side of cut face was detected. To delineate the governing factors of slope behavior, especially backward slip of ridge-cut slope, petrographic characteristics of rock cores obtained from four drilled boreholes had been examined. BIPS images inside boreholes had been acquired and structural characteristics of slope rock had been studied. Mechanical properties of discontinuity planes distributed in the drilled core had been measured and the shear strength of coal seam imbedded-discontinuity planes also had been obtained by performing the direct shear test. Monitoring results of slope behavior had been analyzed by comprehensibly considering both the mechanical and structural characteristics of slope rock and coal seam-imbedded discontinuity planes, and the potential governance of coal seam and clay minerals embedded in the joint plane on the regional slope behavior has been also identified.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.5
• /
• pp.904-913
• /
• 2002

In this paper, the dynamic stress intensity factors of fracture mechanics are numerically computed in time domain using the FEM. For which the finite element formulations are derived applying the Galerkin method to the equations of motion in convolution integral as has been presented in the previous paper. To assure the strain fields of r$^{-1}$ 2/ singularity near the crack tip, the triangular quarter-point singular elements are imbedded in the finite element mesh discretized by the isoparametric quadratic quadrilateral elements. Two-dimensional problems of the elastodynamic fracture mechanics under the impact load are solved and compared with the existing numerical and analytical solutions, being shown that numerical results of good accuracy are obtained by the presented method.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11a
• /
• pp.778-780
• /
• 2005

최근 디지털 융합(Digital Convergence)이 활발히 진행되면서 이동형 장치(Mobile Device)는 더욱 대용량, 고성능화 되고 비휘발성 메모리 요구가 커지고 있다. 이에 휴대가 용이하여, 접근시간이 빠르고, 전력소비가 적은 플래시 메모리가 많이 사용되고 있으나 상대적으로 느린 지움 시간과 지움 횟수의 한계 등 극복해야할 문제점이 있다. 본 논문에서는 이러한 문제점을 해결하기 위한 플레인 지움 정책을 제안하고 성능평가를 실시한다. 제안하는 플레인 지움 정책은 기존의 지움 정책과 같이 플래시의 블록단위의 균등한 사용을 고려할 뿐만 아니라 임베디드 시스템의 제한된 성능을 고려하여 연산을 최소화한다. 제안된 방법은 Greedy, Cost-benefit 방법에 비해 Wear-leveling에서 성능을 향상시켰고, RCP(Ranked Cleaning Policy)에 비해 연산횟수를 감소시켰다.

• Journal of the Optical Society of Korea
• /
• v.17 no.2
• /
• pp.172-176
• /
• 2013

For demonstrating widely tunable external cavity lasers operating for near-infrared (NIR) wavelength, a flexible polymer waveguide with an imbedded Bragg grating is incorporated. Due to the superior flexibility of the polymer material, the reflection wavelength of the Bragg grating is widely tunable by imposing tensile and compressive strains on the flexible Bragg grating. A third-order Bragg grating is formed on the device for facilitating the fabrication method. With a superluminescent laser diode as a gain medium of ECL, the tunable laser exhibited output power of -3 dBm and a tuning range of 32 nm.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.57.5-58
• /
• 2015

We describe relations between modern cosmology and general relativity in the historical context. We reveal some ironies imbedded in Einstein's final correction of his gravitational field equation in the context of cosmology in 1917 which has apparently opened a new era of modern physical cosmology. The ugly (according to Einstein) correction term was introduced only to build a static cosmology which turns out to be in flat contradiction with observation. Somehow, however, it is the correction term which has saved the modern cosmology from the genuine creativity of nature continuously revealed by astronomical observations. Whether the present precision cosmology is also a correct one is often ignored by the practitioners but still a pressing open question left for future theoretical and observational pursuits.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2159-2163
• /
• 2003

Hand carried computing machinery and tools have been developed into an embedded system which the small footprint operating system is contained internally. Windows CE which is one of imbedded operating system is a lightweight, multithreaded operating system with an optional graphical user interface. Its strength lies in its small size, its Win32 subset API, and its multiplatform support. Therefore we choose to port this OS on Arm based board that is provided high performance, low cost, and low power consumption. In this paper, we describe the architecture of ARM based board, the feature of Windows CE, techniques and steps involved in this porting process.

• Journal of The Korean Astronomical Society
• /
• v.37 no.5
• /
• pp.557-562
• /
• 2004

We discuss diffusion of particles in turbulent flows. In hydrodynamic turbulence, it is well known that distance between two particles imbedded in a turbulent flow exhibits a random walk behavior. The corresponding diffusion coefficient is ${\~}$ ${\upsilon}_{inj}{\iota}_{turb}$, where ${\upsilon}_{inj}$ is the amplitude of the turbulent velocity and ${\iota}_{turb}$ is the scale of the turbulent motions. It Is not clear whether or not we can use a similar expression for magnetohydrodynamic turbulence. However, numerical simulations show that mixing motions perpendicular to the local magnetic field are, up to high degree, hydrodynamical. This suggests that turbulent heat transport in magnetized turbulent fluid should be similar to that in non-magnetized one, which should have a diffusion coefficient ${\upsilon}_{inj}{\iota}_{turb}$. We review numerical simulations that support this conclusion. The application of this idea to thermal conductivity in clusters of galaxies shows that this mechanism may dominate the diffusion of heat and may be efficient enough to prevent cooling flow formation when turbulence is vigorous.

• Transactions on Electrical and Electronic Materials
• /
• v.10 no.4
• /
• pp.143-145
• /
• 2009

The electrical and photovoltaic properties of single junction silicon quantum dot solar cells are investigated. A prototype solar cell with an effective area of 4.7 $mm^2$ showed an open circuit voltage of 394 mV and short circuit current density of 0.062 $mA/cm^2$. A diode model with series and shunt resistances has been applied to characterize the dark current-voltage data. The photocurrent of the quantum-dot solar cell was found to be strongly dependent on the applied voltage bias, which can be understood by consideration of the conduction mechanism of the activated carriers in the quantum dot imbedded material.

• Journal of Information Technology Applications and Management
• /
• v.12 no.4
• /
• pp.123-131
• /
• 2005

Since most of the conventional web servers have been designed to Provide the general purpose and user's convenience as the primary goal, there is an overhead to apply them to the embedded system for remote monitoring and controlling the operation status of the Internet appliance. To cope with this overhead, an embedded Linux web server Is suggested in this paper The basic concept is to provide miniaturization and extendability by simplifying the requirements of web server as the services to the requests of web document for the user's menu and the execution of CGI Program for monitoring and controling the Internet appliance, and satisfying only the indispensable requirements of HTTP which are necessary for the interface with the conventional web browsers. For the evaluation of its feasibility, each module has been implemented on Linux environment, and tested with the MS Explorer 6.0.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.11
• /
• pp.1531-1540
• /
• 2002

With the invention of the inlaying technique for celadon in the latter half of the 12th century, the Koryo potters reached a new height of artistic and scientific achievement in ceramics chemical technology. Inlaid celadon shards, collected in 1991 during the surface investigation of Kangjin kilns found on the southwestern shore of South Korea, were imbedded in epoxy resin and polished for cross-section examination. Backscattered electron images were taken with an electron microprobe equipped with an energy dispersive spectrometer. The spectrometer was also used to determine the composition of micro-areas. Porcelain stone, weathered rock of quartz, mica, and feldspar composition were found to be the raw material for the body and important components in the glaze and white inlay. The close similarity between glaze and black inlay in the microstructure suggests that the glaze material was modified by adding clay with high iron content, such as biotite, for use as black inlay. The deep soft translucent quality of celadon glaze is brought about by its microstructure of bubbles, remnant and devitrified minerals, and the schlieren effect.