• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.11
• /
• pp.27-32
• /
• 1999

Metal-ferroelectric-semiconductor devices by susing rapid thermal annealed $LiNbO_3/Si$(100) structures were fabricated and demonstrated nonvolatile memory operations. The estimated field-effect electron mobility and transconductance on a linear region of the fabricated FET were about $600cm^2/V{\cdot}s$ and 0.16mS/mm, respectively. The ID-VG characteristics of MFSFET's showed a hysteresis loop due to the ferroelectric nature of the $LiNbO_3 films. The drain current of the on state was more than 4 orders of magnitude larger than the off state current at the same read gate voltage of 0.5V, which means the memory operation of the MFSFET. A write voltage as low as ${\pm}3V$, which is applicable to low power integrated circuits, was used for polarization reversal. The ferroelectric capacitors showed no polarization degradation up to $10^{10}$ switching cycles with the application of symmetric bipolar voltage pulse (peak-to-peak 6V, 50% duty cycle) of 500kHz.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2018.07a
• /
• pp.509-512
• /
• 2018

최근 미세먼지에 대한 관심이 높아지고 있으며, 미세먼지를 줄이기 위한 다양한 기술이 연구되고 있다. 본 연구에서는 기존 가솔린 이륜차의 단점을 극복하고 미세먼지 발생을 줄일 수 있는 배터리 교환식 이륜차 및 IoT 기반 지원시스템을 소개한다. 전기 이륜차에 탑재되는 IoT Edge device에서는 배터리 잔량, 배터리 ID, 위치 정보 등의 정보를 LTE-M 통신을 통해 IoT 클라우드에 전송하고, 배터리 교환이 필요한 경우 주변의 배터리 교환기 위치 및 교환 가능한 배터리 정보 전달 받을 수 있다. 현재 전기이륜차에 탑재될 IoT Edge device 및 사용자용 스마트폰앱을 개발하고 있으며, 배터리 교환기 및 클라우드 서비스 개발도 수행될 예정이다.

• Journal of IKEEE
• /
• v.17 no.2
• /
• pp.214-220
• /
• 2013

Small area LDO (Low drop-out) regulator with pass transistor using body-driven technique is presented in this paper. The body-driven technique can decrease threshold voltage (Vth) and increase the current ID flowing from drain to source in current. The technique is applied to the pass transistor to reduce size of area and maintain the same performance as conventional LDO regulator. A pass transistor using the technique can reduce its size by 5.5 %. The proposed LDO regulator works under the input voltage of 2.7 V ~ 4.5 V and provides up to 150mA load current for an output voltage range of 1.2 V ~ 3.3 V.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.3
• /
• pp.570-576
• /
• 2007

In this study, the characteristics of metal-ferroelectric-semiconductor FET (MFSFET) device is investigated using field-dependent polarization and square-law FET models. From drain current with the gate voltage variation, when coercive voltages of ferroelectric thin film are 0.5 and 1V, the memory windows are 1 and 2V, respectively. When the gate voltages are 0, 0.1, 0.2 and 0.3V, the difference of saturation drain currents of the MFSFET device at two threshold voltages in ID-VD curve are 1.5, 2.7, 4.0, and 5.7mA, respectively. As a result of the analysis for drain currents after tine lapse, which is based on the simulation for hysteresis loop and the fitting of retention properties of ferroelectric thin films such as PLZT(10/30/70), PLT(10) and PZT(30/70) thin film shows excellent reliability that the decrease of saturation current is about 18% after 10 years.

• Smart Media Journal
• /
• v.12 no.7
• /
• pp.18-26
• /
• 2023

In this study, we propose a cow behavior recognition system based on YOLOX and OC-SORT. YOLO X detects targets in real-time and provides information on cow location and behavior. The OC-SORT module tracks cows in the video and assigns unique IDs. The quantitative analysis module analyzes the behavior and location information of cows. Experimental results show that our system demonstrates high accuracy and precision in target detection and tracking. The average precision (AP) of YOLOX was 82.2%, the average recall (AR) was 85.5%, the number of parameters was 54.15M, and the computation was 194.16GFLOPs. OC-SORT was able to maintain high-precision real-time target tracking in complex environments and occlusion situations. By analyzing changes in cow movement and frequency of mounting behavior, our system can help more accurately discern the estrus behavior of cows.

• Analytical Science and Technology
• /
• v.36 no.1
• /
• pp.32-43
• /
• 2023

This study reports for the first time about a stability indicating RP-HPLC method for qualitative and quantitative determination of acalabrutinib in bulk and dosage form and in presence its impurities 1, 2 and 3. The chromatographic separation was carried on Zorbax XDB-C18 (250×4.6 mm; 5 µ id) as stationary phase, Phosphate buffer pH 6.4 and methanol 80:20 (v/v) as mobile phase at a flow rate of 1.0 mL/min, UV detection was carried at wavelength of 238 nm and the analysis was completed with a run time of 15 min. In these conditions the retention time of acalabrutinib and its impurities 1, 2 and 3 was observed to be 3.50, 4.83, 8.40 and 9.93 min respectively. The method was validated for system suitability, range of analysis, precision, specificity, stability and robustness. Spiked recovery at 50 %, 100 % and 150 % was carried for both standard and impurities and the acceptable % recovery of 98-102 was observed for acalabrutinib and both impurities studied and the % RSD in each spiked level was found to be less than 2. Stability tests were done through exposure of the analyte solution to five different stress conditions i.e expose to 1N hydrochloric acid, 1 N sodium hydroxide, 3 % peroxide, 80 ℃ temperature and UV radiation at 254 nm. In all the degradation condition, standard drug acalabrutinib was detected along with both the impurities studied and the degradation products were successfully separated. In the formulation analysis there is no other chromatographic detection of other impurities and formulation excipients. Hence the developed method was found to be suitable for the quantification of acalabrutinib and can separate and analyse impurities 1 and 2.

• Korean Chemical Engineering Research
• /
• v.49 no.5
• /
• pp.582-587
• /
• 2011

Holdup characteristics of bubble, wake and continuous liquid phases were investigated in bubble columns with viscous liquid media. Effects of column diameter(0.051, 0.076, 0.102 and 0.152 m ID), gas velocity($U_G$=0.02~0.16 m/s) and liquid viscosity(${\mu}_L$=0.001~0.050 $Pa{\cdot}s$) of continuous liquid media on the holdups of bubble, wake and continuous liquid phases were discussed. The three phase such as bubble, wake and continuous liquid phases were classified successfully by adapting the dual electrical resistivity probe method. Compressed filtered air and water or aqueous solutions of CMC(Carboxy Methyl Cellulose) were used as a gas and a liquid phase, respectively. To detect the wake as well as bubble phases in the bubble column continuously, a data acquisition system(DT 2805 Lab Card) with personal computer was used. The analog signals obtained from the probe circuit were processed to produce the digital data, from which the wake phase was detected behind the multi-bubbles as well as single bubbles rising in the bubble columns. The holdup of bubble and wake phases decreased but that of continuous liquid media increased, with an increase in the column diameter or liquid viscosity. However, the holdup of bubble and wake phases increased but that of continuous media decreased with an increase in the gas velocity. The holdup ratio of wake to wake to bubble phase decreased with an increase in the column diameter or gas velocity, however, increased with an increase in the viscosity of con-tinuous liquid media. The holdups of bubble, wake and continuous liquid media could be correlated in terms of operating variables within this experimental conditions as: ${\varepsilon}_B=0.043D^{-0.18}U_G^{0.56}{\mu}_L^{-0.13}$, ${\varepsilon}_W=0.003D^{-0.85}U_G^{0.46}{\mu}_L^{-0.10}$, ${\varepsilon}_C=1.179D^{0.09}U_G^{-0.13}{\mu}_L^{0.04}$.

• Journal of environmental and Sanitary engineering
• /
• v.9 no.1
• /
• pp.29-37
• /
• 1994

Anaerobic treatment of wastewater of the red- bean processing industry was carried out and discussed an anaerobic sludge bed reactor( ASBR) as a preliminary study to evaluate applicability of given processes. The dimension of reactor were same as 0.09m- ID$\times $1.5m- height. The type of substrate and the hydraulic retention time( HRT) were considered as experimental variables. The synthetic wastewater with glucose in the laboratory, the wastewater from the red bean processing industry mixed with synthetic wastewater with variation of mixing percent were fed as substrate. The hydraulic retention time was changed from one day to five days. The gas production, the methane content in produced gas, efficiencies of COD removal and 55 removal were evaluated as principal characteristics. With synthetic wastewater as a substrate and at a hydraulic retention time of one day, characteristics of ASBR was the gas production(12$\ell$/day ), the methane content of produced gas(60%), the efficiency of COD removal(92%) and 55 removal(30%). With the real wastewater and at a hydraulic retention time of one day, the gas production and the efficiency of COD removal of the ASBR decreased with the proportion of real wastewater. The gas production and the efficiency of COD removal with real wastewater only was decreased to 70% and 87% of those with synthetic wastewater only, respectively. However, the methane content in produced gas and the efficiency of 55 removal with real wastewater only was increased significantly by 1.25 times and two times of those with synthetic wastewater only, respectively. However, the methane content in produced gas and the efficiency of 55 removal with real wastewater only was increased significantly by 1.25 times and two times of those with synthetic wastewater only, respectively. With real wastewater only as a substrate in the ASBR, the gas production was decreased with an increase of HRT, but the efficiency of COD removal increased with HRTI like the usual trend reported. As a conclusion, the wastewater of the red- bean Processing industry could be treated by anaerobic digestion successfully in the ASBR.Anaerobic treatment of wastewater of the red- bean processing industry was carried out and discussed an anaerobic sludge bed reactor( ASBR) as a preliminary study to evaluate applicability of given processes. The dimension of reactor were same as 0.09m- ID$\times $1.5m- height. The type of substrate and the hydraulic retention time( HRT) were considered as experimental variables. The synthetic wastewater with glucose in the laboratory, the wastewater from the red bean processing industry mixed with synthetic wastewater with variation of mixing percent were fed as substrate. The hydraulic retention time was changed from one day to five days. The gas production, the methane content in produced gas, efficiencies of COD removal and 55 removal were evaluated as principal characteristics. With synthetic wastewater as a substrate and at a hydraulic retention time of one day, characteristics of ASBR was the gas production(12$\ell$/day ), the methane content of produced gas(60%), the efficiency of COD removal(92%) and 55 removal(30%). With the real wastewater and at a hydraulic retention time of one day, the gas production and the efficiency of COD removal of the ASBR decreased with the proportion of real wastewater. The gas production and the efficiency of COD removal with real wastewater only was decreased to 70% and 87% of those with synthetic wastewater only, respectively. However, the methane content in produced gas and the efficiency of 55 removal with real wastewater only was increased significantly by 1.25 times and two times of those with synthetic wastewater only, respectively. However, the methane content in produced gas and the efficiency of 55 removal with real wastewater only was increased significantly by 1.25 times and two times of those with synthetic wastewater only, respectively. With real wastewater only as a substrate in the ASBR, the gas production was decreased with an increase of HRT, but the efficiency of COD removal increased with HRTI like the usual trend reported. As a conclusion, the wastewater of the red- bean Processing industry could be treated by anaerobic digestion successfully in the ASBR.

• Korean Journal of Food Science and Technology
• /
• v.29 no.2
• /
• pp.362-368
• /
• 1997

As a preliminary study for the development of cancer-preventing functional food using Korean mistletoe, the cytotoxic effects of Korean mistletoe on between non-tumorigenic A3l cell and tumorigenic MSV cell derived from mouse 3T3 fibroblast cell line were investigated. While the raw extract, of which $ID_{50}$, value was $3.94\;{\mu}g/mL$, showed strong cytotoxic effect, its heat-treated extract was not cytotoxic up to $30\;{\mu}g/mL$. On the other hand, the heat-treated extract with law concentration showed an accelerative effect on the proliferation of non-tumorigenic A3l cell and an inhibitory effect on that of tumorigenic MSV cell. In addition, the influences of the addition of carbohydrates, such as galactose, lactose, glucose, mannose, fructose, sucrose and starch, to mistletoe extract were studied. There were not any significant changes with raw extract plus carbohydrate treatment, but the accelerative and inhibitory effects of heat-treated extract on each A3l and MSV cell were increased further by the treatment with sugars such as lactose, galactose, glucose, fructose. In order to investigate the changes of cytotoxicity of fermented Korean mistletoe according to fermentation periods, the raw and heat-treated extract were inoculated with Lactobacillus plantarum. During 1, 3, 5 and 7 fermentation days, the fermented raw mistletoe extract showed gradual accelerative effect on A31 cell proliferation without any changes of cytotoxicity on MSV cell. In case of the fermented heat-treated extract, however, the accelerative effect of heat-treated extract on A31 cell proliferation in early stage was disappeared during the fermentation.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.5 no.2
• /
• pp.89-100
• /
• 2019

In our previous studies, we developed a ¹⁸F-labeled TSPO-binding ligand, named [¹⁸F]CB251, which has been proved to be a promising TSPO-binding PET radiotracer for the detection and monitoring of TSPO expression in pathological diseases. (Ki = 0.27 nM for TSPO, 1.96% ID/g of tumor uptake at 1h post-injection) Based on these results, we utilized 6,8-dichloro-2-phenylimidazo[1,2-a]pyridineacetamide analogs, CB185 (1) as a targeting moiety for the selective delivery of probes and anticancer molecules to TSPO-overexpressed tissues. In this study, we designed CB185 derivatives contains different PEG chains (n = 1, 3 and 5) and fluorescence dye (Cy5) to identify the necessary space between a TSPO-binding ligand and an anticancer agent. Three CB185 derivatives (11a-c) which contains Cy5 and PEG chain, were synthesized and the effect of PEG additive on their TSPO-binding affinities were evaluated using in vitro assays. The binding affinity for compounds 11a-c was lower than that of PK11195 (Ki = 3.2 nM), but still characterized by nanomolar binding affinity for TSPO (Ki = 46.5 nM for 11a, 51.0 nM for 11b, and 388.5 nM for 11c). These results showed that the conjugates are characterized by a moderate binding affinity toward TSPO except for compound 11c, which PEG chain consist of five PEG monomers. Our finding might add useful information to decide the appropriate PET chain length for developing new TSPO-targeting drug carriers.