• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.693-699
• /
• 2013

In this paper, ${\pi}/4$-DQPSK modem according to ITU-R M.1842-1 recommendation Annex1 is investigated and simulated. At first, standardization and technical trend of VHF maritime mobile communication are introduced. The ${\pi}/4$-DQPSK modem defined in the Annex1 should support 28.8Kbps bit transmission rate within 25KHz frequency bandwidth. We describe the system model and simulation process of ${\pi}/4$-DQPSK modem transmitter and receiver design with RRC(Root Raised Cosine) transmitter and receiver filter. Then we suggest various graphical simulation results(time domain signals, constellation, power spectral density according to roll-off factor, eye diagram), and show simulated BER performance of the modem. From the simulation results, it is shown that roll-off factor of RRC filter affects to BER performance according to SNR and the designed simulation model meets the spectrum mask requirement suggested in ITU-R M.1842-1 recommendation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.10
• /
• pp.4002-4014
• /
• 2015

ITU-R M.1842-1, as a well-known specification dedicated to maritime mobile applications, has standardized wireless transmission protocols according to the particular characteristics of a maritime communications scenario. A time division multiple access (TDMA) frame structure, along with modulation schemes to achieve a high data rate, has been described clearly in ITU-R M.1842-1. However, several specification items are still under "to be decided" status, which brings ambiguity to research works. In addition, the current version of ITU-R M.1842-1 is focused mainly on maritime transmissions in open-sea areas, where the cyclic prefix (CP) is set to zero and only 16-QAM is used in the multi-carrier (MC) system. System performance might be dramatically degraded in coastline areas due to the inter-symbol interference (ISI) caused by selective fading. This is because there is a higher probability that the signal will be reflected by obstacles in coastline areas. In this paper, we introduce the transmission resource block (TRB) dedicated to ITU-R M.1842-1 for a ship ad-hoc network (SANET), where the pilot pattern of TRB is based on the terrestrial trunked radio (TETRA). After that, we evaluated SANET performance under the maritime channel model in a coastline area. In order to avoid noise amplification and to overcome the ISI caused by selective fading, several strategies are suggested and compared in the channel estimation and equalization procedures, where the link-level simulation results finally validate our proposals.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.7
• /
• pp.582-588
• /
• 2014

IMO and IALA have undertaken projects that GMDSS Modernization and E-navigation, which refer to "Future digital communications systems" for a more efficient transmission of voice and data communications in the VHF maritime mobile service. ITU has also resolved in WRC-07 Resolution 357 to study the use of spectrum-efficient technologies in order to provide for the operation of ship and port security and maritime safety systems. IALA and ITU WP5B have coordinated for the technical developments and the spectrum issues. Recommendation ITU-R M.1842-1 has approved by WP5B meeting. This revision provides a wideband data service both 50kHz and 100kHz in the VHF maritime mobile service. This paper has studied E-navigation, its needs for data exchange that includes explanations of the current methods for transmitting data by VHF that based in land mobile radio service. A further technologies trend is estimated for Recommendation ITU-R M.1842-1, that is based on the land mobile radio standards with some tailored to fit the needs of the maritime mobile service.

• Journal of Advanced Navigation Technology
• /
• v.18 no.6
• /
• pp.541-545
• /
• 2014

Rec. ITU-R M.1842-1 is international recommendation for VHF band communication guideline in maritime mobile service RR Appendix 18 channels. In this paper, we simulate 28.8 kbps VHF ${\pi}$/4-DQPSK digital baseband modem compatible with the recommendation, then it is designed and implemented with FPGA. Cazac sequence is used as a preamble since packet format is not defined untill now in the recommendation. Baseband modem is designed by VHDL language and implemented on NEXYS4 development platform having Atrix7 FPGA chip from Xilinx. For wireless communication test of total prototype system, ADC/DAC board is implemented and EV9730 RF module is utilized. From the experimental results, implemented FPGA modem shows spectral bandwidth of 25 kHz and successful data exchanges between tx and rx communication platform.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.12
• /
• pp.2839-2846
• /
• 2014

New VHF band for use in VDE is determined by WRC-12 due to the overload of AIS VDL, and the system characteristics of the VDE is recommended as ITU-R M. 1842-1. CS-TDMA, a multiple access method of AIS class B, is recommended as that of the VDE. It is inefficient for CS-TDMA just applying the report interval used in AIS class B to transmit high speed data with higher payload in the aspect of efficiency. In this paper, a simulation is executed in order to determine adequate report interval according to the number of active ships that affects directly network traffic. To this end, the performance of CS-TDMA, which includes the number of received packets, reception success rate, channel utilization, and collision rate, is investigated via a simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.6
• /
• pp.681-688
• /
• 2016

Several VHF bands for the use in analog communications has been changed to those for the use in new maritime digital communications by WRC-12. ITU-R M. 1842-1 has been also standardized, recommending the characteristics of maritime digital communication systems. In addition, a Shipborne Ad-hoc Network (SANET) has been introduced by IMO in order to provide ships, which cannot be connected to a shore directly, with maritime digital data exchange services with the help of ad-hoc communication. In this paper, several functionalities of the SANET, including channel access, route determination to a shore, and data exchange, are verified via sea trials. It is expected that the SANET can be applicable to collecting and analyzing maritime information, facilitating the entry and departure of vessels, and the communication infrastructure of e-navigation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.2
• /
• pp.383-385
• /
• 2017

For the purpose of providing high data rate real-time services, radio transmission technologies for ship ad-hoc network based on the Recommendation ITU-R 1842-1 are designed. In order to increase the link throughput of real-time services, in this paper, we investigate the performance of the SANET with the spatial transmit diversity techniques are employed. Based on the analysis of the packet error rate and throughput, we select the efficient multiple antenna schemes for SANET to improve the link reliability.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.11a
• /
• pp.83-85
• /
• 2011

최근 국제적으로 e-Navigation 구현을 위한 논의가 활발히 이루어지면서 VHF 대역에서 해상 디지털 통신 시스템 도입을 위한 표준 및 권고 개정이 진행되고 있다. 본 논문에서는 ITU-R M.1842-1기반 디지털 VHF 구축을 위하여 국제적으로 진행되고 있는 디지털 VHF 시스템 구현에 대하여 고찰하고 ITU-R 권고에 입각한 해상 디지털 VHF 구축 방안에 대하여 기술하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.3
• /
• pp.254-262
• /
• 2013

This paper proposes FMT(Filtered Multi-Tone)-based digital radio implementation algorithms and the results obtained by various field tests especially in terms of transmitter characteristics. In this study, we predefined frame structure and protocols used for the CSTDMA(Carrier Sensing Time Division Multiple Access) scheme, designed digital filters and RF front end to fulfill the system characteristics such as the spectral mask and processing delays given by the Recommendation ITU-R M.1842-1. The proposed system supports exchange of data for e-Navigation with the usage of wider channel of 50-100kHz bandwidth, Turbo coding and FMT modulation. Furthermore, the common Ethernet protocol makes connection to local WLAN(Wireless Local Area Network) on board the ship for other data services.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.10
• /
• pp.1999-2007
• /
• 2017

In this paper, we implement a multi-band network selection (MNS) system based on Linux operating system which determines the optimal communication link for given network conditions among the available LTE, very high frequency (VHF), and high frequency (HF). The implemented software consists of a network interface, an MNS server, and a user GUI. We perform indoor test to verify the function of the implemented MNS system using two sets of MNS system. To this end, two types of VHF communication links that follow ITU-R M.1842-1 Annex 1 and Annex 4 are emulated in software. In addition, the HF transmission (reception) port of one MNS is directly connected to the HF reception (transmission) port of another MNS. We demonstrate through indoor tests that the implemented MNS system can support seamless maritime communication service in spite of artificial disconnection or re-connection of LTE, VHFs, and HF. The implemented MNS system is applicable to various maritime communication services including e-navigation.