• Journal of Applied Reliability
• /
• v.13 no.2
• /
• pp.99-107
• /
• 2013

One-shot device is required to successfully perform its function only once at the moment of use. The reliability of a one-shot device should be expressed as a probability of success. In this paper, we propose a bayesian approach for estimating reliability of one-shot devices with small sample size. We employ a gamma prior to obtain the posterior distribution. Finally, we compare the accuracy of the proposed method with general maximum likelihood method.

• Journal of the Korean Solar Energy Society
• /
• v.29 no.3
• /
• pp.28-36
• /
• 2009

The majority of fixed shading devices are installed in the exterior of a building in order to dissipate the heat absorbing from the sun and to prevent the direct sunlight. In designing external shading devices for windows, many requirements must be considered simultaneously; solar geometry, optimum energy performance, multi-purpose usage and design factors etc.. In order Lo satisfy these requirements, we suggests the folding shading device and its optimum design methodology. Also we analyzed the thermal performance using the IES_VE program according to various operating modes and compared with existing shading devices. The results show that proposed device reduce about $1.90{\sim}22.40%$ in cooling load and about $1.09{\sim}24.22%$ in heating load in comparison with existing ones.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.4
• /
• pp.479-483
• /
• 2006

We developed a microfluidic immunoassay platform for the detection of various analytes such as bacterial pathogen by packing antibody-immobilized glass beads in spatially-isolated microchambers on a microfluidic device. Primary amines of antibody were covalently conjugated to carboxyl-terminated glass beads previously treated with aminosilane followed by glutaraldehyde. Through this covalent binding, up to 905 $\mu$g immunoglobulin G (IgG) per gram of glass beads was immobilized. For application, glass beads attaching antibody specific to Escherichia coli O157:H7, a foodborne pathogen, were packed into a microfluidic device and used for the detection of the serotype. This prototype immunoassay device can be used for the simultaneous detection of multiple analytes by sequentially packing different-sized glass beads attaching different antibody in discrete microchambers on a single microfluidic device.

• Fashion & Textile Research Journal
• /
• v.9 no.3
• /
• pp.327-335
• /
• 2007

As the digital environment gets ubiquitous, domestic and international research and development on smart clothing is being conducted actively these days. However, most research is being carried out with its center on upper garment. So research on lower garment is insufficient even though it affects wearer's activity and comfort to a great extent when digital devices are attached or wearers moves their body. Therefore, the type of clothes this research proposes is men's formal pants which have an electrically-vibrating wearable device. These are smart pants which are helpful in easing muscle pain with their massaging effect in daily life. For this purpose, this research intends to develop patterns considering the body shapes and movements of wearers and suggest a tentative structure plan for smart pants where a vibration device is attached, which is mainly composed of vibrating motor, controller, and switch, and considered their bulks, numbers, attaching places.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.4
• /
• pp.332-337
• /
• 2002

The applicability of models based on fractal geometry to characterize the surface of the EL devices was investigated. Insulating layer and phosphor layer of EL devices were deposited on ITO glass using e-beam method. The images of phosphor layer by scanning electron microscope(SEM) were transformed to binary coded data. The relations between fractal geometry and electrical characteristics of EL devices were investigated. When the fractal dimension of $Cas:EuF_3$ EL device was 1.82 and its grain boundary area was 19%, the brightness of $Cas:EuF_3$ EL device was 261 cd/$\textrm{m}^2$.

• Journal of Ocean Engineering and Technology
• /
• v.26 no.5
• /
• pp.1-4
• /
• 2012

A energy saving device "Crown duct" has been developed and its efficiency gain has been verified experimentally in the towing tank of SSPA. The preswirl stator is well known as one of energy saving devices, which recovering the rotational energy of propeller slipstream. Crown duct has two functions of recovers the rotational energy by three blades on top of duct and of flow concentration by semi-duct. The model tests showed 4.4% efficiency gain with Crown Duct at full load condition and 6.9% at ballast condition compared with the bare hull ones for the middle class tanker.

• Journal of the Korean Society of Safety
• /
• v.18 no.2
• /
• pp.125-131
• /
• 2003

In recent years, the Korean Army made use of fork-lifters or conveyors when loading and/or unloading military material in order to prevent accidents and to promote efficiency of military material handling activities. However, in troops smaller thin battalions, manual material handling activities are still committed for many reasons. In this thesis, a brand new loading/unloading device for efficient military material handling or manual workers was developed, and its validation study was conducted through objective assessment based on electromyography, subjective assessment based on Body-Map technique developed by Corlett and Bishop, and finally work performance comparison. The results of EMG analysis showed that muscular workload improved by 24% when using the device compared to manual work without the device, and complain of each body part was remarkably reduced. In addition, remarkable effectiveness enhancement was observed in the work performance. Consequently, it could be concluded that ergonomic devices like one developed in this research should be studied further in the ergonomic sense as well as in the economical sense.

• Journal of Power Electronics
• /
• v.16 no.1
• /
• pp.66-73
• /
• 2016

The quantity of alternating current (AC) leakage and the value of distortion factor in capacitor currents are discussed with regard to a new power component called variable capacitance device (VCD). This component has terminals for controlling its capacitance. Nonlinear dielectric characteristics are utilized in this device to vary the capacitance. When VCD operates in an AC circuit, the AC leakage from this device through direct current (DC) control voltage source increases according to the conditions of DC control voltage and so on. To solve this problem, we propose techniques for suppressing AC leakage. Although VCD has strong nonlinear characteristics, the current through the capacitor is not distorted significantly. The relations between AC leakage and the distortion in current waveforms are investigated. An application example for an AC power regulator is also introduced to evaluate the distortion in waveforms.

• Journal of Sensor Science and Technology
• /
• v.15 no.4
• /
• pp.245-250
• /
• 2006

In this paper, glass cap wafer for MEMS device package is fabricated by using sand blaster dry etcher and Its surface is studied. The surface of dry etched glass is analyzed by using SEM, and many glass particles and micro cracks are observed. If these kind of particles were dropped from glass to the surface of device, It would make critical failure to the operation of device. So, several cleaning and etching methods are induced to remove these kinds of dormant failure mode and optimized condition is found out.

• Journal of Information Processing Systems
• /
• v.14 no.3
• /
• pp.740-750
• /
• 2018

There are a great number of Internet-connected devices and their information can be acquired through an Internet-wide scanning tool. By associating device information with publicly known security vulnerabilities, security experts are able to determine whether a particular device is vulnerable. Currently, the identification of the device information and its related vulnerabilities is manually carried out. It is necessary to automate the process to identify a huge number of Internet-connected devices in order to analyze more than one hundred thousand security vulnerabilities. In this paper, we propose a method of automatically generating device information in the Common Platform Enumeration (CPE) format from banner text to discover potentially weak devices having the Common Vulnerabilities Exposures (CVE) vulnerability. We demonstrated that our proposed method can distinguish as much adequate CPE information as possible in the service banner.