• 대한수학회보
• /
• 제41권1호
• /
• pp.13-18
• /
• 2004

We defined Cantor dimensions of a perturbed Cantor set, and investigated a relation between these dimensions and Hausdorff and packing dimensions of a perturbed Cantor set. In this paper, we introduce another expressions of the Cantor dimensions. Using these, we study some informations which can be derived from power equations induced from contraction ratios of a perturbed Cantor set to give its Hausdorff or packing dimension. This application to a deranged Cantor set gives us an estimation of its Hausdorff and packing dimensions, which is a generalization of the Cantor dimension theorem.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2006년 추계학술발표대회 개요집
• /
• pp.77-79
• /
• 2006

While RSW(Resistance Spot Welding) have been the most successful sheet metal joining process in automotive industry, there are certain qualify issues due to the control system and its application process. Recent materials and coatings make the process more complicated resulting in new challenges for quality welds. In this research, an intelligent RSW system with adaptive control algorithm is introduced to overcome typical RSW issues and its applications to automotive body assembly are presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.288-290
• /
• 1999

In view of the importance of DFT(Discrete Fourier Transform) in spectrum analysis, its computation efficiency is a topic. This paper presents calculation time to extract the power frequency at a fault signal using DFT. Furthermore, it is tested a relaying algorithm based on modified DFT and its application to Micro-controller.

• 무역상무연구
• /
• 제46권
• /
• pp.181-210
• /
• 2010

The continuing advance of multimodal transport with the importance for efficient and effective logistics management emphasizes the need for uniform legal approach to international multimodal transport. However, the current fragmented instrument regulating such transport is being an obstacle to development of multimodal transport as it aggravates confusion and uncertainty. The Rotterdam rules, which was adopted in December 2008 by UNCITRAL, expands its scope of application to door-to-door transport. However, the new rules has some problems in its application to multimodal transport operation as it has been conceived not to regulate general multimodal carriage but to regulate contract of carriage by sea that extends its services to the transport by other modes. This article examines conflict of conventions in the Rotterdam Rules. The applicability of the Rotterdam Rules in international multimodal transport contract and possibility of potential conflict with other transport conventions are analyzed with some hypothetical cases. Furthermore, problems arising from application of the Rotterdam Rules under international multimodal transport Contracts are indicated in the chapter IV.

• Journal of Electrical Engineering and Technology
• /
• 제8권6호
• /
• pp.1305-1309
• /
• 2013

The application of the superconducting fault current limiter (SFCL) in a power distribution system is expected to contribute the voltage-sag suppression of the bus line as well as the fault-current reduction of the fault line. However, the application effects of the SFCL on the voltage sag of the bus line including the fault current are dependent on its application location in a power distribution system. In this paper, we investigated the fault current limiting and the voltage sag suppressing characteristics of the SFCL due to its application location such as the outgoing point of the feeder, the bus line, the neutral line and the 2nd side of the main transformer in a power distribution system, and analyzed the trace variations of the bus-voltage and fault-feeder current. The simulated power distribution system, which was composed of the universal power source, two transformers with the parallel connection and the impedance load banks connected with the 2nd side of the transformer through the power transmission lines, was constructed and the short-circuit tests for the constructed system were carried out. Through the analysis on the short-circuit tests for the simulated power distribution system with the SFCLs applied into its representative locations, the effects from the SFCL's application on the power distribution system were discussed from the viewpoints of both the suppression of the bus-voltage sag and the reduction of the fault current.

• Journal of Electrochemical Science and Technology
• /
• 제13권4호
• /
• pp.472-478
• /
• 2022

Solar energy harvesting is practiced by various nations for the purpose of energy security and environment preservation in order to reduce overdependence on oil. Converting solar energy into electrical energy through Photovoltaic (PV) module can take place either in on-grid or off-grid applications. In recent time Lithium battery is exhibiting its presence in on-grid applications but its role in off-grid application is rarely discussed in the literature. The preliminary capacity and Peukert's study indicated that the battery quality is good and can be subjected for life cycle test. The capacity of the battery was 10.82 Ah at 1 A discharge current and the slope of 1.0117 in the Peukert's study indicated the reaction is very fast and independent on rate of discharge. In this study Lithium Iron Phosphate battery (LFP) after initial characterization was subjected to life cycle test which is specific to solar off-grid application as defined in IEC standard. The battery has delivered just 6 endurance units at room temperature before its capacity reached 75% of rated value. The low life of LFP battery in off-grid application is discussed based on State of Charge (SOC) operating window. The battery was operated both in high and low SOC's in off-grid application and both are detrimental to life of lithium battery. High SOC operation resulted in cell-to-cell variation and low SOC operation resulted in lithium plating on negative electrode. It is suggested that to make it more suitable for off-grid applications the battery by default has to be overdesigned by nearly 40% of its rated capacity.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.158-161
• /
• 2004

KOMPSAT-2, to be launched in 2005, will be a long awaited addition to the existing high-resolution satellite sensors. The use of download facilities in Europe will greatly increase its capacity without loosing any coverage over Korea. In this paper the concept for an Urban Application Center is presented. It is part of the proposed Regional Application Center which is dedicated to archiving and distributing KOMPSAT-2 images. The Urban Application Center will offer services derived from KOMPSAT-2. Its aim is to promote the use of KOMPSAT-2 data and increase the general awareness and acceptance of satellite data.

• 통상정보연구
• /
• 제9권1호
• /
• pp.99-117
• /
• 2007

The purpose of this study is to explore the application sphere of BPM(Business Process Management) to e-trade process using BPM technology and its service architecture in order to expand the usage of e-trade platform which is developing. After close reviewing the current status of trade process, the possibility of BPM application by e-trade process will be analyzed. The result of analysis is that BPM application to local L/C and purchasing confirmation process could be implemented because those processes are very suitable to apply standardized process and can minimize the risk and confusion of users. BPM application to remaining trade process have to be considered by mid-term and long-term project with the reflection of pilot project performance. Also this study suggests a business management model of e-trade process based on BPM technology which is the new IT technology and integrated interface in view of trade community.

• IEIE Transactions on Smart Processing and Computing
• /
• 제5권1호
• /
• pp.55-62
• /
• 2016

In this paper, we propose a hybrid multi.system-on-chip (H-MSoC) architecture that provides a high-flexibility system in a rapid development time. The H-MSoC approach provides a flexible system-on-chip (SoC) architecture that is easy to configure for physical- and application-layer development. The physical- and application-layer aspects are dynamically designed and modified; hence, it is important to consider a design methodology that supports rapid SoC development. Physical layer development refers to intellectual property cores or other modular hardware (HW) development, while application layer development refers to user interface or application software (SW) development. H-MSoC is built from multi-SoC architectures in which each SoC is localized and specified based on its development focus, either physical or application (hybrid). Physical HW development SoC is referred to as physical-SoC (Phy-SoC) and application SW development SoC is referred to as application-SoC (App-SoC). Phy-SoC and App-SoC are connected to each other via Ethernet. Ethernet was chosen because of its flexibility, high speed, and easy configuration. For prototyping, we used a LEON3 SoC as the Phy-SoC and a ZYNQ-7000 SoC as the App-SoC. The proposed design was proven in real-time tests and achieved good performance.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1997년도 가을 학술발표회 논문집
• /
• pp.37-48
• /
• 1997