• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.50-55
• /
• 2019

Recently Ransomware attacks are continuously increasing, and new Ransomware, which is difficult to detect just with a basic vaccine, continuously has its upward trend. Various solutions for Ransomware have been developed and applied. However, due to the disadvantages and limitations of existing solutions, damage caused by Ransomware has not been reduced. Ransomware is attacking various platforms no matter what platform it is, such as Windows, Linux, servers, IoT devices, and block chains. However, most existing solutions for Ransomware are difficult to apply to various platforms, and there is a limit that they are dependent on only some specific platforms while operating. This study analyzes the problems of existing Ransomware detection solutions and proposes the onboard module based Ransomware detection system; after the system defines the function of necessary elements through analyzing requirements that can actually reduce the damage caused by the Ransomware from the viewpoint of users, it supports various OS without pre-installation and is able to restore data even after being infected. We checked the feasibility of each function of the proposed system through the analysis of the existing technology and verified the suitability of the proposed techniques to meet the user's requirements through the questionnaire survey of a total of 264 users of personal and corporate PC users. As a result of statistical analysis of the questionnaire results, it was found that the score of intent to introduce the system was at 6.3 or more which appeared to be good, and the score of intent to change from existing solution to the proposed system was at 6.0 which appeared to be very high.

• Tunnel and Underground Space
• /
• v.28 no.6
• /
• pp.609-619
• /
• 2018

This study was carried out at a local limestone mine to analyze the ventilation efficiency of the shaft equipped with a main fan. The results show that its ventilation efficiency is clearly verified for the natural as well as the mechanical ventilation. The airflow rate of $11.7m^3/s$ was induced by the natural ventilation force and the maximum quantity is almost same as the airflow rate estimated by monitoring the average temperatures in the upcast and downcast air columns. Meanwhile, the airflow rate exhausted by the main fan through the shaft was $20.3{\sim}24.8m^3/s$; variation of the quantity was caused by the upward shift of the mine ventilation characteristic curve due to the frequent movement of the equipment. This indicates efforts are required to reduce the ventilation resistance and raise the quantity supplied by the main fan. The turbulent diffusion coefficients along the 1912 m long airway from the portal to the shaft bottom was estimated to be $15m^2/s$ and $18m^2/s$. Since these higher coefficients imply that contaminants will be dispersed at a faster velocity than the airflow, prompt exhaust method should be planned for the effective air quality control. The ventilation shaft and main fan are definitely what local limestone mines inevitably need for better working environment and sustainable development.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.4
• /
• pp.405-412
• /
• 2019

SOLAS requires that ECDIS be installed on ships of more than 500 gross tonnage engaged in international navigation until the first inspection arriving after July 1, 2018. Several accidents related to the use of ECDIS have occurred with its installation as a new major navigation instrument. The 12 incident reports issued by MAIB, BSU, BEAmer, DMAIB, and DSB were analyzed, and the cause of accident was determined to be related to the operation of the navigator and the ECDIS system. The text was analyzed using the R-program to quantitatively analyze words related to the cause of the accident. We used text mining techniques such as Wordcloud, Wordnetwork and Wordweight to represent the importance of words according to their frequency of derivation. Wordcloud uses the N-gram model as a way of expressing the frequency of used words in cloud form. As a result of the uni-gram analysis of the N-gram model, ECDIS words were obtained the most, and the bi-gram analysis results showed that the word "Safety Contour" was used most frequently. Based on the bi-gram analysis, the causative words are classified into the officer and the ECDIS system, and the related words are represented by Wordnetwork. Finally, the related words with the of icer and the ECDIS system were composed of word corpus, and Wordweight was applied to analyze the change in corpus frequency by year. As a result of analyzing the tendency of corpus variation with the trend line graph, more recently, the corpus of the officer has decreased, and conversely, the corpus of the ECDIS system is gradually increasing.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.458-463
• /
• 2019

Palladium (Pd) is widely used as a catalyst and noxious gas sensing materials. Especially, various researches of Pd based hydrogen gas sensor have been studied due to the noble property, Pd can be adsorbed hydrogen up to 900 times its own volume. In this study, palladium oxide (PdO) nanostructures were grown on Si substrate ($SiO_2(300nm)/Si$) for 3 to 5 hours at $230^{\circ}C{\sim}440^{\circ}C$ using thermal chemical vapor deposition system. Pd powder (source material) was vaporized at $950^{\circ}C$ and high purity Ar gas (carrier gas) was flown with the 200 sccm. The surface morphology of as-grown PdO nanostructures were characterized by field-emission scanning electron microscopy(FE-SEM). The crystallographic properties were confirmed by Raman spectroscopy. As the results, the as-grown nanostructures exhibit PdO phase. The nano-cube structures of PdO were synthesized at specific substrate temperatures and specific growth duration. Especially, PdO nano-cube structrures were uniformly grown at $370^{\circ}C$ for growth duration of 5 hours. The PdO nano-cube structures are attributed to vapor-liquid-solid process. The nano-cube structures of PdO on graphene nanosheet can be applied to fabricate of high sensitivity hydrogen gas sensor.

• Korean Journal of Clinical Laboratory Science
• /
• v.51 no.2
• /
• pp.125-133
• /
• 2019

A microscope is the fundamental research and diagnostic apparatus for clinical investigation of signaling transduction, morphological changes and physiological tracking of cells and intact tissues from patients in the biomedical laboratory science. Proper use, care and maintenance of microscope with comprehensive understanding in mechanism are fully requested for reliable image data and accurate interpretation for diagnosis in the clinical laboratory. The standard operating procedure (SOP) for light microscopes includes performance procedure, brief information of all mechanical parts of microscopes with systematic troubleshooting mechanism depending on the laboratory capacity. Maintenance program encompasses cleaning objective, ocular lenses and inner optics; replacement and calibration of light source; XY sample stage management; point spread function (PSF) measurement for confocal laser scanning microscope (CLSM); quality control (QC) program in fluorescent microscopy; and systematic troubleshooting. Laser safety is one of the concern for medical technologists engaged in CLSM laboratory. Laser safety guideline based on the laser classification and risk level, and advisory lab wear for CLSM users are also expatiated in this overview. Since acquired image data presents a wide range of information at the moment of acquisition, well-maintained microscopes with proper microscopic maintenance program are impulsive for its interpretation and diagnosis in the clinical laboratory.

• Journal of Korea Foundry Society
• /
• v.41 no.2
• /
• pp.127-131
• /
• 2021

Based on its good compatibility with high-temperature environments, the Ti-48Al-2Cr-2Nb alloy is used for high-temperature materials of industrial equipment. In this study, a Ti-48Al-2Cr-2Nb alloy turbocharger turbine wheel was fabricated by a vacuum centrifugal casting method. The conditions that prevent misrun defects of the turbocharger turbine wheel blade from centrifugal casting using alumina molds were investigated. The microstructure of the alloy prepared by vacuum centrifugal casting was studied by means of optical microscopy (OM), with a micro-Vickers hardness analyzer (HV), by X-ray diffraction (XRD) and by SEM-EDS. The HV and SEM-EDS examinations of the as-cast Ti-48Al-2Cr-2Nb alloy showed that the thickness of the oxide layer (α-case) was typically less than 50 ㎛. At a high preheating temperature of 1,100℃, a moderate RPM of 260, and with an alumina mold with a large gate size, there were almost no misrun defects. Therefore, it was confirmed that a Ti-48Al-2Cr-2Nb alloy turbocharger turbine wheel with fewer misrun defects could be achieved through a high preheating temperature, a moderate RPM, a large gate size and an alumina mold to suppress the formation of alpha-case components.

• Journal of Conservation Science
• /
• v.37 no.3
• /
• pp.191-208
• /
• 2021

In this study, the status of damage by subterranean termites and their management according to the region and type of domestic wooden cultural properties were identified. This was based on the survey reports of agencies conducting regular nationwide and regional monitoring of subterranean termites. In addition, using geographical information system (GIS) based on the survey contents, a map was constructed of termite infestation and its progress on 2,805 wooden cultural properties that were surveyed nationwide. Based on the map produced, a total of 486 cases of termite infestation were confirmed in wooden cultural properties during 2018-2019, of which 143 cases (approximately 29.4%) were confirmed to be owing to the invasion of termites in the ground and infestation of wood materials. A web platform and an application using a mapping application program interface were created to increase accessibility to the investigated damage status data. The methods employed by each institution for investigating and monitoring the invasion of termites in the ground included the use of detection dogs, visual observation, installation of wood specimens made of pine, and microwave equipment. However, it was confirmed that monitoring and survey methods were not applied to determine the territorial range of the subterranean termite colonies. Accordingly, the use of dyeing and mark-release-recapture methods were deemed necessary to understand the current status, such as calculating the scope of the target wooden cultural property, when monitoring subterranean termite colonies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.620-626
• /
• 2021

The purpose of this study is to examine the characteristics and industrial structure and to present a future vision through analysis of industrial agglomeration, growth, and industrial efficiency targeting the Chungnam display industry nurtured by regional industrial policies since 2002. The industrial scale and aggregate status were analyzed through the business scale quotient and location quotient, and the growth and pace of structural change in the industry were analyzed through the industrial growth rate and change of industrial structure. Analysis results found the display industry shows its solid status based on industrial agglomeration. The RLQ, added value ratio, and employment coefficient have a relatively high comparative advantage. However, the growth rate has declined, and the pace of structural change has become lower. The regional competitiveness has been deteriorating. It is necessary to develop strategies to help the industry evolve into a convergence display industry to secure competitiveness by forming value chains. The regional industrial policy 'Regional Innovation Growth Plan' should be utilized to foster local industries that consider the regional characteristics and development directions and to promote the shared growth of related subsidiary industries through fostering specialized complexes for materials, parts, and equipment.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.6
• /
• pp.25-34
• /
• 2011

Dredged and reclaimed ground in progress at the West Coast has a high content of coarse particles. There will be different behaviors depending on the location of outlet and engineering properties of soil when its ground is dredged by a pump. Therefore, the experiments were conducted that were manufactured about the chamber equipment of length 2,650mm, width 770mm, height 735mm, experimented step filling method and water content about 300%, 500% and 700% respectively with SM and ML samples in order to realize segregating sediment characteristics of dredged ground with changing much fine. With results of analysis, ML sample by higher initial water content was reached to the period of complete sedimentation and coefficient of sedimentation consolidation increased with increases of diffusion distance. SM samples showed behavior of coarse soil with diffusion distance 120cm, diffusion distance of more than 120cm showed a similar tendency with ML sample under the influence of fines. In ML sample, it could be also found that lower depth and the more increasing diffusion distance increase in percentage of sieve #200 but water content decreases. In SM sample, it could be also found that coarse soil was piled at near the diffusion distance zone but fine soil was piled at the far diffusion distance zone and prominent difference showed between percentage of sieve #200 and water content(%) by boundary point 120cm~160cm of both samples. Also, shear strength was expressed ML-maximum 2.97kPa, SM-maximum 10.2kPa with diffusion distance.

• Maritime Security
• /
• v.1 no.1
• /
• pp.311-343
• /
• 2020

Because of the global warming, the Arctic Ocean is expected to be ice-free by the year 2035. When the Arctic Ocean will be opened, a number of national interests will become more salient as experiencing a shortened sailing distance and decreasing navigation expense, possibility of natural resources transport by sea from Arctic Circle, and indirect-profit making by building a herb port in Asia. To secure the national interests and support the free activities of people in this region, R.O.K government is trying to make advanced policies. In order to carry out the naval tasks in the Arctic Ocean, using the operational characteristics(mobility, flexibility, sustainability, presence of capabilities, projection) is necessary. To this end, ROK Navy should analyze the operational environment (O.E.) by its capability(weakness and strength), opportunity, and threat. R.O.K. Navy should make an effort over the following issues to implement the tasks in the Arctic Ocean: first, Navy needs to map out her own plan (Roadmap) under the direction of government policies and makes crews participate in the education·training programs in home and abroad for future polar experts. Third, to develop the forces and materials for the tasks in cold, far operations area, Navy should use domestic well-experienced shipbuilding skills and techniques of the fourth industrial revolution. Next, improving the combined operations capabilities and military trust with other countries in the Arctic region to cover the large area with lack of forces' number and to resolve the ports of call issues. Lastly, preparation in advance to execute a variety of missions against military and non-traditional threats such as epidemics, HA/DR, SOLAS, in the future operation area is required.