• 제목/요약/키워드: IT and non-IT

Search Result 26,063, Processing Time 0.062 seconds

Studies on the bionomics of Oriental moth, Cnidocampa flavescens WALKER, damaging to the persimmon tree in the southern part of Korea (감나무에 기생하는 Cnidocampa flavescens WALKER의 생태에 관한 연구)

  • Chung S. T.;Lee E. S.
    • Korean journal of applied entomology
    • /
    • v.4
    • /
    • pp.39-46
    • /
    • 1965
  • The author studied on the bionomics of Oriental moth. Cnidocampa flavescens WALKER, damaging to the persimmon tree n the southern part of Korea from 1964 to 1965. The results can be summarized as follows; 1. Emergence peak period of Oriental moth was mid-June in Taegu district and eggs are deposited on the opposite side of persimmon tree leaf. Specially most of eggs are deposited on the terminal part of opposite side and peak period s also mid-June. 2. Hatched Percentage of eggs was $84.4\%$ in 1964 while $96.1\%$ in 1965 at the rearing room. Mean egg Period was $5.984\pm0.162$ in 1964 while $6.262\pm0.094$ days in 1965. Thus during two years, the egg period was about 6 days. 3. In the growth ratio of Oriental moth fed on various host plants persimmon tree, Acer negund, Hazel-wood and Platanus, the best growth ratio was shown on the leaf of Hazel-wood from 1st till 3rd instar, but, on the contrary, persimmon tree was the best from 4th till the last instar. The growth ratio of head width was also the same tendency as the body length above mentioned. Individuals fed on the leaf of platanus were dead after 20 days. 4. Oriental moth has one generation a year and molts 6 times. The first molting occurred in 5 hours after hatched, and the other moltings were done at f days intervals. After 3 days since the last molting, larvae made the non for over-winter in it. 5. As the bristles on the process of larval body are different from each position and instar, judgement of instars are possible by the counting of bristles on the body according to the Table 8. Specially the bristle of L. 2., D. 2, 3 ,8. 10. and L. 1, 3, 4, 5, 6, 7, are perfectly different from each instar. From these bristles, instars can be recognized easily. 6. Pupation of larvae in the over-wintered cocoon on the stem of persimmon tree was done in mid-May and continued will early June when emergence will take place. 7. Mean number of eggs in the ovary was $1325.5\pm2.7182$

  • PDF

The efficacy of denture cleansing agents: A scanning electron microscopic study (수종 의치세정제의 세척 효과에 관한 주사전자현미경적 비교 연구)

  • Yun, Bo-Hyeok;Yun, Mi-Jung;Hur, Jung-Bo;Jeon, Young-Chan;Jeong, Chang-Mo
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.49 no.1
    • /
    • pp.57-64
    • /
    • 2011
  • Purpose: The purpose of this study was to compare the cleansing performance of a distilled water, a diluted solution of sodium hypochlorite as a household bleaching cleanser and three alkaline peroxide cleansers in vivo plaque deposits by using scanning electron microscope. Materials and methods: Five individuals were selected from department of the prosthodontics in Pusan National University Hospital, and each of them was inserted with specimens for plaque accumulation in their temporary dentures for 48 hours. The specimens were removed and cleaned by each cleansing agents for 8 hours. Scanning electron micrographs were made from the specimens at a magnification of ${\times}2,000$. A panel of ten persons with a dental or paradental background, but not directly involved in the study, was selected to analyze the photomicrographs to determine which denture cleanser was more effective in removing plaque. Results: Diluted solution of sodium hypochlorite was the most effective at removing plaque following $Polident^{(R)}$, $Cleadent^{(R)}e$, $Bonyplus^{(R)}$ and distilled water in order. But there was no significant difference of cleansing efficacy between diluted solution of sodium hypochlorite and $Polident^{(R)}$, $Polident^{(R)}$ and $Cleadent^{(R)}e$, $Cleadent^{(R)}e$ and $Bonyplus^{(R)}$, respectively (P > .05). Alkaline peroxide cleansers by themselves cannot adequately remove accumulated plaque deposits, especially if the deposits are heavy. Corrosion could be seen on the surface of non-precious alloy specimens immersed in diluted solution of sodium hypochlorite. Conclusion: It is recommended to use of alkaline peroxide type cleansers with brushing whenever possible, since denture cleanliness is often poor due to the relative inefficiency of these cleansers.

Preparation and Properties of Eco-friendly Waterborne Polyurethane-urea Primer for Thermoplastic Polypropylene Applied to Automobile Interiors (자동차 내장재용 열가소성 폴리프로필렌에 적용되는 선처리제용 친환경 수분산 폴리우레탄-우레아의 제조 및 성질)

  • Shin, Jong Sub;Park, Jin Myeong;Lee, Young Hee;Kim, Han Do
    • Clean Technology
    • /
    • v.20 no.3
    • /
    • pp.232-240
    • /
    • 2014
  • The significance of thermoplastic polyolefin polypropylene (PP) lies in its potential to replace polyvinyl chloride (PVC), the most widely used material for automobile interiors (door trim, dash board), which discharges harmful compounds in certain conditions. Another benefit of PP (0.855 amorphous - 0.946 crystalline $g/cm^3$) is its low density compared to that of PVC ($1.1-1.45g/cm^3$), which reduces vehicle weight. Market demand for eco-friendly water-based adhesive/coating material is rising significantly as a substitute for solvent-based adhesive/coating material which emits VOC and causes harmful working conditions. Under such context, in this study, a series of eco-friendly waterborne polyurethane-urea primer (a paint product that allows finishing paint to adhere much better than if it were used alone) for hydrophobic PP were prepared from different mix of DMPA content, NCO/OH molar ratio, various wt% of silicone diol and various soft segment content, among which DMPA of 21 mole %, NCO/OH molar ratio of 1.2, modified silicone diol of 5 wt% and soft segment content of 73 wt% led to good adhesion strength. Additionally, the incorporation of optimum content of additives (0.5 wt% dispersing agent, 0.5 wt% levelling agent, 1.5 wt% antifoaming agent, 3.0 wt% matting agent) into the optimum waterborne polyurethane-urea also enabled good stability, levelling, antifoaming and non-glossy.

Development and Application of the SWAT HRU Mapping Module for Estimation of Groundwater Pollutant Loads for Each HRU in the SWAT Model (SWAT HRU별 지하수 오염부하량 산정을 위한 SWAT HRU Mapping Module 개발 및 적용)

  • Ryu, Ji Chul;Mun, Yuri;Moon, Jongpil;Kim, Ik Jae;Ok, Yong Sik;Jang, Won Seok;Kang, Hyunwoo;Lim, Kyoung Jae
    • Journal of Environmental Policy
    • /
    • v.10 no.1
    • /
    • pp.49-70
    • /
    • 2011
  • The numerous efforts have been made in understanding generation and transportation mechanism of nonpoint source pollutants from agricultural areas. Also, the water quality degradation has been exacerbated over the years in many parts of Korea as well as other countries. Nonpoint source pollutants are transported into waterbodies with direct runoff and baseflow. It has been generally thought that groundwater quality is not that severe compared with surface water quality. However its impacts on groundwater in the vicinity of stream quality is not negligible in agricultural areas. The SWAT model has been widely used in hydrology and water quality studies worldwide because of its flexibilities and accuracies. The spatial property of each HRU, which is the basic computational element, is not presented. Thus, the SWAT HRU mapping module was developed in this study and was applied to the study watershed to evaluate recharge rate and $NO_3-N$ loads in groundwater. The $NO_3-N$ loads in groundwater on agricultural fields were higher than on forests because of commercial fertilizers and manure applied in agricultural fields. The $NO_3-N$ loads were different among various crops because of differences in crop nutrient uptake, amount of fertilizer applied, soil properties in the field. As shown in this study, the SWAT HRU mapping module can be efficiently used to evaluate the pollutant contribution via baseflow in agricultural watershed.

  • PDF

Cloning of a Glutathione S-Transferase Decreasing During Differentiation of HL60 Cell Line (HL6O 세포주의 분화 시 감소 특성을 보이는 Glutathione S-Transferase의 클로닝)

  • Kim Jae Chul;Park In Kyu;Lee Kyu Bo;Sohn Sang Kyun;Kim Moo Kyu;Kim Jung Chul
    • Radiation Oncology Journal
    • /
    • v.17 no.2
    • /
    • pp.151-157
    • /
    • 1999
  • Purpose : By sequencing the Erpressed Sequence Tags of human 걸ermal papilla CDNA library, we identified a clone named K872 of which the expression decreased during differentiation of HL6O cell line. Materials and Methods : K872 plasmid DNA was isolated according to QIA plasmid extraction kit (Qiagen GmbH, Germany). The nucleotide sequencing was performed by Sanger's method with K872 plasmid DNA. The most updated GenBank EMBL necleic acid banks were searched through the internet by using BLAST (Basic Local Alignment Search Tools) program. Nothern bots were performed using RNA isolated from various human tissues and cancer cell lines. The gene expression of the fusion protein was achieved by His-Patch Thiofusicn expression system and the protein product was identified on SDS-PAGE. Results : K872 clone is 1006 nucleotides long, and has a coding region of 675 nucleotides and a 3' non-coding region of 280 nucleotides. The presumed open reading frame starting at the 5' terminus of K872 encodes 226 amino acids, including the initiation methionine residue. The amino acid sequence deduced from the open reading frame of K872 shares $70\%$, identity with that of rat glutathione 5-transferase kappa 1 (rGSTKl). The transcripts were expressed in a variety of human tissues and cancer cells. The levels of transcript were relatively high in those tissues such as heart, skeletal muscle, and peripheral blood leukocyte. It is noteworthy that K872 was found to be abundantly expressed in coloreetal cancer and melanoma cell lines. Conclusion : Homology search result suggests that K872 clone is the human homolog of the rGSTK1 which is known to be involved in the resistance of cytotoxic therapy. We propose that meticulous functional analysis should be followed to confirm that.

  • PDF

A Simulation-Based Investigation of an Advanced Traveler Information System with V2V in Urban Network (시뮬레이션기법을 통한 차량 간 통신을 이용한 첨단교통정보시스템의 효과 분석 (도시 도로망을 중심으로))

  • Kim, Hoe-Kyoung
    • Journal of Korean Society of Transportation
    • /
    • v.29 no.5
    • /
    • pp.121-138
    • /
    • 2011
  • More affordable and available cutting-edge technologies (e.g., wireless vehicle communication) are regarded as a possible alternative to the fixed infrastructure-based traffic information system requiring the expensive infrastructure investments and mostly implemented in the uninterrupted freeway network with limited spatial system expansion. This paper develops an advanced decentralized traveler information System (ATIS) using vehicle-to-vehicle (V2V) communication system whose performance (drivers' travel time savings) are enhanced by three complementary functions (autonomous automatic incident detection algorithm, reliable sample size function, and driver behavior model) and evaluates it in the typical $6{\times}6$ urban grid network with non-recurrent traffic state (traffic incident) with the varying key parameters (traffic flow, communication radio range, and penetration ratio), employing the off-the-shelf microscopic simulation model (VISSIM) under the ideal vehicle communication environment. Simulation outputs indicate that as the three key parameters are increased more participating vehicles are involved for traffic data propagation in the less communication groups at the faster data dissemination speed. Also, participating vehicles saved their travel time by dynamically updating the up-to-date traffic states and searching for the new route. Focusing on the travel time difference of (instant) re-routing vehicles, lower traffic flow cases saved more time than higher traffic flow ones. This is because a relatively small number of vehicles in 300vph case re-route during the most system-efficient time period (the early time of the traffic incident) but more vehicles in 514vph case re-route during less system-efficient time period, even after the incident is resolved. Also, normally re-routings on the network-entering links saved more travel time than any other places inside the network except the case where the direct effect of traffic incident triggers vehicle re-routings during the effective incident time period and the location and direction of the incident link determines the spatial distribution of re-routing vehicles.

Temperature-dependent developmental models and fertility life table of the potato aphid Macrosiphum euphorbiae Thomas on eggplant (감자수염진딧물(Macrosiphum euphorbiae Thomas)의 온도발육모형과 출산생명표)

  • Jeon, Sung-Wook;Kim, Kang-Hyeok;Lee, Sang Guei;Lee, Yong Hwan;Park, Se Keun;Kang, Wee Soo;Park, Bueyong;Kim, Kwang-Ho
    • Korean Journal of Environmental Biology
    • /
    • v.37 no.4
    • /
    • pp.568-578
    • /
    • 2019
  • The nymphal development of the potato aphid, Macrosiphum euphorbiae (Thomas), was studied at seven constant temperatures (12.5, 15.0, 17.5, 20.0, 22.5, 25.0, and 27.5±1℃), 65±5% relative humidity (RH), and 16:8 h light/dark photoperiods. The developmental investigation of M. euphorbiae was separated into two steps, the 1st through 2nd and the 3rd through 4th stages. The mortality was under 10% at six temperatures. However, it was 53.0% at 27.5℃. The developmental time of the entire nymph stage was 15.5 days at 15.0℃, 6.7 days at 25.0℃, and 9.7 days at 27.5℃. In the immature stage, the lower threshold temperature of the larvae was 2.6℃ and the thermal constant was 144.5 DD. In our analysis of the temperature-development experiment, the Logan-6 model equation was most appropriate for the non-linear regression models (r2=0.99). When the distribution completion model of each development stage of M. euphorbiae larvae was applied to the 2-parameter and 3-parameter Weibull functions, each of the model's goodness of fit was very similar (r2=0.92 and 0.93, respectively). The adult longevity decreased as the temperature increased but the total fecundity of the females at each temperature was highest at 20℃. The life table parameters were calculated using the whole lifespan periods of M. euphorbiae at the above six temperatures. The net reproduction rate (R0) was highest at 20.0℃(63.2). The intrinsic rate of increase (rm) was highest at 25℃(1.393). The finite rate of doubling time (Dt) was the shortest at 25.0℃(2.091). The finite rate of increase (λ) was also the highest at 25.0℃(1.393). The mean generation time(T) was the shortest at 25.0℃(9.929).

Simulation and model validation of Biomass Fast Pyrolysis in a fluidized bed reactor using CFD (전산유체역학(CFD)을 이용한 유동층반응기 내부의 목질계 바이오매스 급속 열분해 모델 비교 및 검증)

  • Ju, Young Min;Euh, Seung Hee;Oh, Kwang cheol;Lee, Kang Yol;Lee, Beom Goo;Kim, Dae Hyun
    • Journal of Energy Engineering
    • /
    • v.24 no.4
    • /
    • pp.200-210
    • /
    • 2015
  • The modeling for fast pyrolysis of biomass in fluidized bed reactor has been developed for accurate prediction of bio-oil and gas products and for yield improvement. The purpose of this study is to analyze and to compare the CFD(Computational Fluid Dynamics) simulation results with the experimental data from the CFD simulation results with the experimental data from the reference(Mellin et al., 2014) for gas products generated during fast pyrolysis of biomass in fluidized bed reactor. CFD(ANSYS FLUENT v.15.0) was used for the simulation. Complex pyrolysis reaction scheme of biomass subcomponents was applied for the simulation of pyrolysis reaction. This pyrolysis reaction scheme was included reaction of cellulose, hemicellulose, lignin in detail, gas products obtained from pyrolysis were mainly $CO_2$, CO, $CH_4$, $H_2$, $C_2H_4$. The deviation between the simulation results from this study and experimental data from the reference was calculated about 3.7%p, 4.6%p, 3.9%p for $CH_4$, $H_2$, $C_2H_4$ respectively, whereas 9.6%p and 6.7%p for $CO_2$ and CO which are relatively high. Through this study, it is possible to predict gas products accurately by using CFD simulation approach. Moreover, this modeling approach should be developed to predict fluidized bed reactor performance and other gas product yields.

The effects of audit quality on the relationship between deferred tax assets and discretionary accruals (감사품질이 이연법인세자산과 재량적 발생액의 관계에 미치는 영향)

  • Lee, Hyun-Joo;Park, Sang-Seob
    • Management & Information Systems Review
    • /
    • v.35 no.4
    • /
    • pp.169-184
    • /
    • 2016
  • Deferred tax assets (liability) in a company's financial statements are to reflect the temporary difference between taxable income and accounting income and therefore can provide useful information as a proxy for discretionary accruals. In addition, deferred tax assets allow a company to manage its earnings by reviewing the feasibility of the assets' recognition. As such, this study focused on deferred tax assets to examine their relationship with discretionary accruals, which were measured by a modified Jones model (Dechow et al. 1995), and investigated the impact of audit quality on this relationship. In order to control for the effects of tax rate change and measurement credibility, deferred tax assets of 2,670 non-financial firms from 2009 to 2010 were collected as samples for the study. The results of the empirical analysis are as follows. First, the samples as a whole indicated that deferred tax assets have a negative relationship with discretionary accruals in a general sense, but a high-quality audit did not reveal a significant relationship between them. Second, the 1,379 samples with negative discretionary accruals did not reveal a significant relationship between deferred tax assets and discretionary accruals; however, the result showed a significant negative relationship under a high-quality audit. These findings suggest that in the case of negative discretionary accruals, a high-quality audit restricts an earnings management technique that utilizes deferred tax assets and that the assets can be a useful tool for detecting discretionary accruals. The present study is meaningful in that, unlike previous research, it combined the two contrasting roles of deferred tax assets-that of an earnings management detector and an earnings management tool-to examine their general relationship. The study also suggested that audit quality could influence the usefulness of deferred tax assets in providing information on discretionary accruals.

  • PDF

Effects of Constitutive Androstane Receptor (CAR) on PBRU Transactivation of CYP2B Gene in Different Culture Cell Types: Comparison Between Hep G2 and COS-cells (배양세포의 Type에 따른 Constitutive Androstane 수용체 (CAR)의 CYP2B PBRU 전사활성 효과: Hep G2와 COS 세포의 비교)

  • 민계식
    • Journal of Life Science
    • /
    • v.13 no.3
    • /
    • pp.324-332
    • /
    • 2003
  • The objective of this study was to examine if transient transfection of CAR can transactivate CYP2B1 PBRU reporter gene in COS cells in which the endogenous CYP2B1 gene is not induced by PB. In non-transfeced cells of both Hep G2 and COS, the endogeneous expression of CAR was not detected by antibody against CAR. When cultured cells were transfected with CAR expression plasmid, mCAR1-GFP, both cell types expressed high levels of CAR protein and could allow to examine the effect of CAR in PBRU transactivation. Both cell types expressed endogenous RXR and transfection of RXR expression plasmid dramatically increased its protein expression. Whereas CAR transactivated PBRU2C1Luciferase about 12 fold as compared to 2C1Luciferase in Hep G2 cells, it did not stimulate the luciferase activity of the PBRU reporter gene in COS cells. These results indicate that Hep G2 cells can respond to CAR differently from COS cells, and suggest that factors other than CAR and RXR may be required in inducing PBRU activation and the expression of these factors may be different between liver and kidney.