• 한국태양에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.361-366
• /
• 2009

Amid the crisis of global climate change, interest in low carbon and energy-saving building has been increasingly growing. Korea is likely to be designated as one of the countries subject to CO2 reduction under the 'Post-2012 Climate System' The efforts to minimize the building energy has been made and in line with the increasing need of low carbon and eco-friendly building, a demand for building evaluation programs has been on the rise. However, the metro logical data which is necessary for such program has not been effectively provided and moreover, the source, calculation method and period remain uncertain. This study was intended to evaluate the regional typical metro logical data (ISO TRY) provided by Korean Solar Energy Society and compile the month of test reference years (TRY), and analyze the regional weather using dry-bulb temperature, wet-bulb temperature and solar irradiance which are regarded the representative metro logical data.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.5
• /
• pp.871-881
• /
• 2010

In the uniform price electricity market or bilateral electricity market, the energy transactions in which the network is not considered and ISO's system operation costs which ISO try to minimize are settled separately. In this paper, transmission loss, one of the ISO's system operation costs, was dealt. The conventional marginal loss allocation method gives economic signals but three aspects have to be considered; excessiveness, arbitrariness and cross-subsidy. In this paper, marginal loss compensation efficiency method was suggested which consider those aspects of the conventional marginal loss allocation method. Also the characteristics of the marginal loss compensation efficiency were analyzed in the appendixes. And simple 2-bus system and IEEE 14 bus system were used to explain these characteristics.

• Journal of the Korean Solar Energy Society
• /
• v.29 no.6
• /
• pp.102-109
• /
• 2009

The research on meteorological data in Korea has been carried out but without much consistency and has been limited to some areas only. Of relatively more importance has been the area in the utilization of the solar energy, however, the measurement of the global solar horizontal irradiation has been quite limited. In the current study, the actually measured value of the global solar horizontal irradiation from the meteorological data and the theoretically calculated value of the global solar horizontal irradiation from the cloud amount will be analyzed comparatively. The method of analysis will employ the standard meteorological data drafted by the Korean Solar Energy Society, the standard meteorological data from the presently used simulation program and the corresponding results have been compared with the calculated value of the global solar horizontal irradiation from the cloud amount. The results of comparing the values obtained from MBE(Mean Bias Error), RMSE(Root Mean Squares for Error), t-Statistic methods and those from each of the standard meteorological data show that the actually measured value of the meteorological data which have been converted into standard meteorological data with the help of the ISO TRY method give the monthly average value of the global solar horizontal irradiation. These values compared with the monthly average value from the IWEC from the Department of Energy of the USA show that the value of the global solar horizontal irradiation in the USA is quite similar. In the case of the values obtained from calculation from the cloud amount, the weather data provided by TRNSYS, except only slight difference, which means that the actually measured values of the global solar horizontal irradiation are significant. This goes to show that in the case of Korea, the value of the global solar horizontal irradiation provided by the Korea Meteorological Administration is will be deemed correct.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.2
• /
• pp.25-33
• /
• 2010

Nowadays worldwide leading companies try to establish more efficient and comprehensive management system for getting high quality, reliability and safety. In this paper, we investigate standards for quality management, dependability management and risk management. We also suggest an integrated and comprehensive system of quality(ISO/TS16949), dependability (IEC60300)and risk(JIS Q2001). The evaluation method on the performance of dependability management systems are developed and applied for the semiconductor equipment company.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.5 no.4
• /
• pp.263-272
• /
• 2009

Nowadays, lots of software that have similar functions is being produced. Hence it is getting more important to select the best and suitable software for each individual or company. Moreover, there are few trustworthy materials regarding to the objective procedure and criteria for the best evaluation of the software quality. To overcome these problems, benchmarking has been carried out. However, benchmarking is also confronting the limit of quality evaluation verification due to the difficult of the objectification of the major test items. To solve these problems, some others try to evaluate the quality of software using objective criteria of evaluation based on ISO/IEC standards. Nevertheless, this method using these defined evaluation items and criteria may result in not very reliable outcome. Therefore, this paper offers the evaluation items reflected in the characteristics of each software in order to prove the validity of the proposed method. Moreover, the objective and quantitative criterion which analyzes and reflects the organization characteristics using AHP methodology is applied to the experiment and performance evaluation. Hence we expect that the proposed method provides the needs of the re-establishment of software quality evaluation criteria and the improvement of process in terms of management.

• Journal of the Korean Society of Safety
• /
• v.29 no.4
• /
• pp.160-167
• /
• 2014

To determine a proper ASIL for each hazardous event with a proper safety goal, the right classes should first be determined for the three properties of the hazardous event; (i) severity of harm from the resultant accident, (ii) exposure to the relevant operational situation, and (iii) controllability to avoid the induced risks. ASIL can be clearly determined with right classes of these three properties. But no specific methodologies or processes for their classification can be found in ISO 26262, except only a rough guideline with a simplified set of illustrative tables. In this paper, we try to present a systematic model for classifying the three properties of the hazardous event and suggest a refined procedure of ASIL determination. The proposed model provides a specific method to get a more objective ASIL compared with that in the standard. Scrutinizing the current methodology, we develop a refined method and also provide an illustrative example.

• Spatial Information Research
• /
• v.20 no.2
• /
• pp.129-136
• /
• 2012

Recently international organizations such as ISO/TC211, OGC, INSPIRE (Infrastructure for Spatial Information in Europe) make an effort to share geospatial data using semantic web technologies. In addition, smart phone and social networking services enable community-based opportunities for participants to share issues of a social phenomenon based on geographic area, and many researchers try to find a method of extracting issues from that. However, serviceable spatial ontologies are still insufficient at application level, and studies of spatial information extraction from SNS were focused on user's location finding or geocoding by text mining. Therefore, a study of extracting spatial phenomenon from social media information and converting it into geosemantic knowledge is very usable. In this paper, we propose a framework for extracting keywords from micro-blog, one of the social media services, finding their relationships using data mining technique, and converting it into spatiotemopral knowledge. The result of this study could be used for implementing a related system as a procedure and ontology model for constructing geoseem antic issue. And from this, it is expected to improve the effectiveness of finding, publishing and analysing spatial issues.

• Applied Biological Chemistry
• /
• v.5
• /
• pp.39-42
• /
• 1964

1) The Moisture and glycogen contents of salted-oyster (Zin Suk Hwa Jut) were much less than those of raw oyster, while the free sugar content was dominent. 2) The amino acids were detected and identified as aspartic acid, glutamic acid, cystine, serine, glycine, lysine, threonine, histidine, alanine, arginine, valine, methionine, tyrosine, phenylalanine, leucine, iso-leucine and tryptophan in the juice of salted-oyster by using the method of paper chromatography, and the all essential amino acids from nutritional view point was admitted in this juice. 3) The juice contained 0.264mg/ml of tyrosine, 0.304mg/ml of arginine, 0.046mg/ml of tryptophan, 0.460mg/ml of histidine, 0.350mg/ml of methionine, 0.440mg/ml of cystine and 0.115mg/ml of phenylalanine.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.240-241
• /
• 2014

The environmental pollution problem the globally related to global warming arises. In the construction industry the cement mostly use material, generates the great quantity of CO₂ among the fired process and the global warming is more aggravated. In addition, the polysilicon that is the main raw material used in the solar power generation, produces 1 ton and the industrial by-product of 2 tons is generated. In this way, the arising sludge there is not method recycling and it is all discarded. Therefore, in this research, try to present as the fundamental research material for using the polysilicon sludge as the admixture of the cement in order to reduce the amount of the cement. The based on 'KS L ISO 679' was progressed mortar test. the liquidity, air flow rate, setting time, water absorption ratio, flexural and compression strength was measured. According to, appropriate replacement ratio of the polysilicon sludge tries to analyze.

• 기술발표회
• /
• s.2006
• /
• pp.279-291
• /
• 2006

This study shows decision-making process for selection of cutoff wall on a wastewater treatment project. There are 10 different cut-off wall methods So, we examine the site to gather information for find appropriate methods. After using that information, 10 cutoff wall methods are reviewed for analysis. Through brainstorming, four alternatives are selected for design VE item. Following the standard VE process, we established performance criteria and evaluated function score(F) using questionnaire. The questionnaires, brainstorming and AHP method for weighting on performance criteria and evaluate function score increased the reliability of this selection process. Water Jet method, one of four methods, has the best function score(F=92.71) and the lease construction cost(as cost index 1,000). The value score also highest as 92.7, so we select the method. The result is value innovation type In addition, the authors try to calculate the environmental burden in selection process using LCA. We cannot conduct the full LCA as defined ISO, so perform Simple LCA In LCA result, the cut-off grouting has the least environmental burden as index 9.09E+01 and Water Jet method has following as the second. To selection best method to specific area and purpose, design VE/LCG process used as useful tool and it is needed to develop integrated method that evaluate VEILCC and LCA as one-set process.