• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.1
• /
• pp.33-40
• /
• 1992

Several etching phenomena were observed and analyzed in diaphragm process performed on 4-inch (100) Si wafers for sensor application. In case of deep etching to above 300$\mu$m depth, the etch-defects appeared at etched surface could be classified into three categories such as hillocks, reaction products, and white residues. It was known that the hillock had a pyramidal shape or trapizoidal hexahedron structure depending on the density and size of the reaction products. The IR spectra showed that the white residue, which was due to the local over-saturation of Si dissolved in solution, was mostly Si-N-O compounds mixed with a small amount of H and C etc. Also, the difference in both the existence of etch-defects and etch rate distribution over a whole wafer was investigated when the etched surfaces were downward, upward horizontally and erective in etching solutions. The obtained data were analyzed through flow pattern in the etching bath. As the results, the downward and erective postures were favorable in the etch rate uniformity and the etch-defect removal, respectively.

• Applied Chemistry for Engineering
• /
• v.29 no.1
• /
• pp.67-76
• /
• 2018

In this study, PDMS-HNT and PDMS-mHNT composite membranes were prepared by the addition of halloysite nanotube (HNT) and modified HNT (mHNT) to PDMS. To investigate the physico-chemical characteristics of composite membranes, analytical methods such as FT-IR, XRD, TGA, and SEM were utilized. The gas permeability and selectivity properties of $N_2$ and $CO_2$ were evaluated. In particular, the PDMS-HNT with 10 wt% HNT and PDMS-mHNT with 5 wt% mHNT showed the highest $CO_2/N_2$ selectivity and $CO_2$ permeability at $35^{\circ}C$, respectively. Overall, PDMS-HNT and PDMS-mHNT composite membranes improved the $CO_2/N_2$ selectivity compared to that of using PDMS membrane.

• Applied Chemistry for Engineering
• /
• v.29 no.5
• /
• pp.571-580
• /
• 2018

In this study, hybrid adsorbents (SS) were prepared by mixing spent coffee grounds (SCG) and sericite, a kind of clay minerals, to adsorb Pb(II) from an aqueous solution. In FT-IR analyses, the main functional groups of SS adsorbents were O-H, C=O and C-N groups. The specific surface area, cation exchange capacity and the pore diameter of SS were larger than those of using SCG and sericite. Formation conditions of the SS adsorbent were the optimum pyrolysis temperature of $300^{\circ}C$, SCG : sericite ratio of 8 : 2, and particle size of 0.3 mm. Langmuir adsorption isotherm was more suitable than Freundlich one, and the maximum adsorption capacity was reached 44.42 mg/g. As a result of the adsorption thermodynamic analysis, the adsorption of Pb(II) onto SS was the physical adsorption and exothermic process in nature. The regeneration of SS adsorbent using distilled water showed 88~92% recovery and the active site of SS adsorbent decreased with increasing the reuse cycle time. As a result, SS adsorbent showed that it can be used to remove Pb(II) easily, inexpensively and efficiently without any pre-treatment from aqueous solutions.

• Applied Chemistry for Engineering
• /
• v.29 no.5
• /
• pp.524-532
• /
• 2018

In this study, two types of amino acids-based anionic biosurfactants such as potassium cocoyl glutamate (CTK) and sodium cocoyl glutamate (CTN) were synthesized from coconut oils and the structure elucidation of CTK and CTN was carried out by using FT-IR, $^1H-NMR$ and $^{13}C-NMR$ spectrophotometries. Measurements of interfacial properties such as static and dynamic surface tensions and emulsification activity showed that both CTK and CTN were surface-active and effective in lowering the interfacial free energy. In particular, the CTK surfactant was found to be more efficient in reducing the interfacial free energy since the larger number of CTK molecules was preferentially adsorbed at the air-water interface due to the higher hydrophobicity and larger mobility of CTK than those of using CTN, indicating possible uses in cosmetics and household products formulation.

• Applied Chemistry for Engineering
• /
• v.29 no.2
• /
• pp.168-175
• /
• 2018

In order to investigate the effect of the chemical treatment of bamboo fiber on physical properties of polypropylene (PP)/bamboo fiber (BF) composites, silane coupling agents such as ${\gamma}$-aminopropyltriethoxysilane (APS), ${\gamma}$-glycidoxypropyl-trimethoxysilane (GPS) and ${\gamma}$-mercaptopropyltrimethoxysilane (MRPS) were applied to BF and alkaline treated BF. Morphological properties of the chemically treated BF were confirmed by optical microscope and SEM measurements, and chemical structure changes were confirmed by FT-IR and EDS. TGA results showed that the thermal stability of silane treated BF increased. Based on the analysis of a universal testing machine and an Izod impact test, the flexural and impact properties of PP/silane treated BF composites showed higher values than those of PP/BF composites. The enhancement of interfacial adhesion properties of the PP/BF composite was checked from SEM images of the fracture of specimens after the tensile test.

• Polymer(Korea)
• /
• v.29 no.4
• /
• pp.369-374
• /
• 2005

In this work, the calcium alginate microcapsules containing lemon oil were prepared by emulsification-internal gelation and their potential use as aromatherapy was examined by the controlled release system. The lemon oil encapsulated in the alginate was successfully observed by Fourier transform (FT-IR) spectroscopy and differential scanning calorimeter (DSC) measurements. Analysis of the diameters and shapes of microcapsules was conducted by scanning electron microscopy (SEM). The mean diameters ranging from 4 to 7 um and encapsulation yield ranging from 50 to $85\%$ were obtained. The controlled release of the lemon oil at $37^{circ}$ was demonstrated by the infrared moisture determination (IMDB). It was found that the amount of released lemon oil decreased with increasing concentrations of alginate and $CaCl_2$ due to the higher the cross-linking density of the capsules prepared. The oil release from the capsule was measured as a function of physical force. We confirmed that the external factor could control the collapse of capsule wall and the release rate.

• Polymer(Korea)
• /
• v.29 no.4
• /
• pp.392-398
• /
• 2005

Self-assembled multilayer thin films of poly(ethylene-alt-maleic anhydride) (PEMAh) and poly(4-vinyl pyridine) (P4VP) were fabricated by layer-by-layer (LbL) sequential adsorption. Fourier transform infrared (FT-IR) spectroscopic analysis of the self-assembled PEMAh/P4VP multilayer films confirms that the driving forces for the multilayer buildup are the intermolecular hydrogen bonding and electrostatic interactions. The linear increase of absorption peak of P4VP at 256 nm with increasing number of PEMAh/P4VP bilayers indicates that the multilayer buildup is an uniform assembling process. We also investigate the effects of polyelectrolyte concenhation variation of the dipping solution and pH variation of the PEMAh solution on the multilayer film formation. Thickness. adsorbed polyelectrolyte mass and surface roughness of the multilayer films were measured by UV-visible spectroscopy, quartz crystal microbalance (QCM), and atomic force microscopy (AFM), respectively.

• Journal of The Korean Astronomical Society
• /
• v.29 no.2
• /
• pp.245-253
• /
• 1996

We have analyzed infrared (IR) images of Jupiter which was observed at the McDonald Observatory, Texas, U.S.A., during the P/SHoemaker-LEvy 9 (SL9) impact period and about one week after the last impact. The IR images were obtained on the 2.7m telescope using a NICMOS array with filters to isolate the $1.5{\mu}m\;NH_3\; band,\;the\;2.3{\mu}m\;CH_4\;band,\;the\;2.12{\mu}m\;H_2\;S(0)$ pressure-induced absorption, and the continua at $1.58{\mu}m\;and\;2.0{\mu}m$ (short K-band). All images except those with the $1.58{\mu}m$ continuum filter show bright impact sites against the relatively dark Jovian disk near the impact latitude of about $45^{\circ}$ S. This implies that dusts originated from the impacts reflect the solar radiation at high altitudes before absorbed by stratospheric $CH_4,\;NH_3 \;or\;H_2$. The impact sites observed with the $2.3{\mu}m$ filter are conspicuously bright against a very dark background. The morphology of impact sites, G, L, and H at 2.3 and $2.12{\mu}m$ filters shows clearly an asymmetric structure toward the incident direction of the comet fragments, in agreement with the studies of visible impact images obtained with the Hubble Space Telescope. Comparisons of reflectances of G, L, and H sites with simple radiative transfer models suggest that optically thick dust layers were formed at high altitudes at which methane absorption attenuates incoming sunlight only by about $1\%$. The dust layers in these sites seem to form at about the same altitude regardless of the magnitude of the impacts, but they appear to descend gradually after the impacts. The dust layers have optical depths of 2-5, according to the models.

• The Korean Journal of Malacology
• /
• v.28 no.2
• /
• pp.157-164
• /
• 2012

The patterns in X-ray diffraction (XRD) spectroscopy provide useful clue at $29.4^{\circ}$ to discriminate two types of Akoya cultured pearl which occurs difference of surface luster. Using the optical microscope, we could be confirmed that the nareous layer of each sample consist of different crystal form. In Fourier Transform Infrared (FT-IR) Spectroscopy analysis, the nareous layer of Akoya cultured pearls with poor luster shows some peaks at 712, 699, 1435, $1444cm^{-1}$ region and these peaks depend on the Calcite. But the nareous layer of pearls with excellent luster could not observed those peaks related with Calcite, we could observed Aragonite band at 699, $1085cm^{-1}$ region. Though this result, we know that the nareous layer of Akoya cultured pearls with excellent luster is mainly composed by Aragonite. Raman bands are also clearly demonstrated to occur difference of band intensity by difference of Aragonite content. In the Scanning Electron Microscope (SEM) analysis, we found that the Akoya cultured pearl luster and surface condition is associated with internal structure.

• Korean Journal of Food Science and Technology
• /
• v.29 no.4
• /
• pp.700-704
• /
• 1997

Fermentation and morphological characteristics of rice bread baked with gums, lipids, and glutens added dough were investigated to establish the standard recipe for rice bread processing. All gum-type additives 1ed to successful formation of rice bread. Hydroxypropyl-methyl-cellulose among tested gums showed the best volume expansion and successful formation of rice bread. Addition of vegetable oils gave better effect on increasing the specific loaf volume and tenderness of rice bread than addition of the solid-type lipids such as margarin and lard during rice bread processing. Dry heating during baking of the rice bread gave more desirable effect on specific gravity of rice bread than wet heating. High-amylose rices such as Suweonjo, AC 27, and IR 44 showed better formation of rice bread in the case of adding 3% hydroxypropyl-methyl-cellulose, while Suweon 230 and Pusa-33-30 showed slightly better formation of rice bread in the case of adding the gluten and strong hard flour. The glutinous rice Hangangchalbyeo failed to the formation of rice bread in both cases of adding 3% hydroxypropyl-methyl-cellulose and the gluten and hard flour.