• Membrane Journal
• /
• v.29 no.3
• /
• pp.155-163
• /
• 2019

The anion exchange membrane using the blending polymer of poly(ether sulfone) and poly(phenylene sulfide sulfone) was prepared. It was confirmed by EDXS and FT-IR analysis that the prepared anion exchange membrane had the -N- as an anion exchange group. The ionic conductivity in 1 mol/L $H_2SO_4$ aqueous solution was measured. The ionic conductivity of the prepared anion exchange membrane was 0.015~0.083 S/cm, and had a high value compared with AFN and APS as a commercial anion exchange membrane. Permeabilities of the vanadium ions through the prepared anion exchange membrane were tested to evaluate the possibility as a separator in vanadium redox flow battery. Vanadium ion permeation rate in the prepared anion exchange membrane had a low value compared with Nafion 117 as a commercial cation exchange and AFN as a commercial anion exchange membrane.

• Membrane Journal
• /
• v.29 no.5
• /
• pp.246-251
• /
• 2019

Facilitated transport membranes using silver nanoparticles as carriers for olefin/paraffin separation have been interested. $AgBF_4$ has been used as a precursor of silver nanoparticles in previous studies. However, relatively expensive $AgBF_4$ is not suitable for commercialization, and thus, PEBAX-5513/AgNPs (precursor: $AgClO_4$)/7,7,8,8-tetracyanoquinodimethane (TCNQ) composite membranes were prepared using silver nanopaticles with relatively inexpensive $AgClO_4$ precursors. Composite membranes of various compositions were prepared for PEBAX-5513/AgNPs/TCNQ composites, but no separation performance was observed. As a result of FT-IR analysis, it was confirmed that silver nanoparticles were formed in the PEBAX-5513 polymer and the surface of Ag nanoparticles was polarized by TCNQ, but the formed silver nanoparticles were not stabilized. From these results, it was concluded that the anion of the precursor plays an important role in the olefin/paraffin separation.

• Membrane Journal
• /
• v.29 no.5
• /
• pp.252-262
• /
• 2019

A sulfonated star branched poly(styrene-b-butadiene-b-styrene) triblock copolymer (SSBS) was synthesized with varying degrees of sulfonation. The effective sulfonation on the butadiene block was confirmed by FT-IR spectroscopy. Ion exchange capacity by titration was used to determine the degree of sulfonation. The synthesized polymer observed enhanced water uptake and proton conductivity. At room temperature, the SSBS with 25 mol% degree of sulfonation showed an outstanding proton conductivity of 0.114 S/cm, similar to that of commercial membrane, Nafion. The effect of temperature at constant relative humidity on conductivity resulted to a remarkable increase in proton conductivity. Methanol permeability studies showed a value lower than Nafion for all the sulfonated membranes. Structural nature observed using AFM showed that the membranes observed microphase separated nanostructures and the connectivity of the interionic channels.

• Resources Recycling
• /
• v.29 no.6
• /
• pp.98-103
• /
• 2020

In this study, the depression behavior of zinc sulfate on the sphalerite with the addition of potassium butyl xanthate was investigated to clear the relationship between zinc sulfate and xanthate in depression of sphalerite. As a result of the experiment, it was confirmed that the depress effect of zinc sulfate on the sphalerite declined with the increase of its addition amount. From the results of SEM-EDS and FT-IR analysis, it was found out that the amorphous precipitate of metal xanthate (Zn-BX) was formed in sphalerite concentrate, when the solubility product of [Zn+]·[BX] in the pulp solution exceeded 3.71×10-11, which is the solubility of Zn-butyl xanthate. It is considered that the Zn-butyl xanthate had a negative effect on the depression of sphalerite.

• Journal of the Korea Computer Graphics Society
• /
• v.29 no.5
• /
• pp.31-40
• /
• 2023

As display resolution increases, many apps also tend to include high-resolution texture maps. Recent advancements in deep-learning-based image super-resolution techniques make it possible to automate high-resolution texture generation. However, there is still a lack of comprehensive analysis of the application of these techniques to texture maps. In this paper, we selected three recent super-resolution techniques, namely BSRGAN, Real-ESRGAN, and SwinIR (classical and real-world image SR), and applied them to upscale texture maps. We then conducted a quantitative and qualitative analysis of the experimental results. The findings revealed various artifacts after upscaling, which indicates that there are still limitations in directly applying super-resolution techniques to texture-map upscaling.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.5
• /
• pp.540-547
• /
• 2007

Humic substances(HS) from Han River water was physic-chemically isolated by fractionational methods to investigate the seasonal distribution and to characterize the properties compared with intrinsic humic materials. Various HS samples were analyzed by element, Fourier transform infrared(FT-IR), proton nuclear magnetic resonance$(^1H-NMR)$ and fluorescence analyzers. The portion of HS from Han River water(HRHS) was 47.0% on the average, however it appeared that rainfall event brought about higher fraction of HS in Han River water by the periodic investigation. Aromaticity and humification degree of the HRHS were relatively lower than those of intrinsic humic materials originated from decomposing vegetation. FT-IR, $^1H-NMR$ and fluorescence spectroscopy showed the distinct differences between HRHS and intrinsic humic materials. Commercial humic materials could not represent structural and functional characteristics of local HS. The fluorescence spectroscopy, a relatively simple measurement, was found most useful tool to estimate humification degree for humic materials from particular sources.

• The Korean Journal of Food And Nutrition
• /
• v.36 no.3
• /
• pp.202-208
• /
• 2023

FT-IR, GC/MS, and ATR-FT-IR analyses were performed to confirm the physicochemical characteristics of saw palmetto fruit (SPF) extract. FT-IR analysis of the standard product showed that the band corresponding to the carbonyl bond of free fatty acid was stronger than the band of acyl-glyceride. Sample E was identified as having the same trend as the standard sample. Fatty acid composition analysis revealed that the main fatty acids in the standard sample were lauric acid and oleic acid. The content of lauric acid ranged from approximately 30% to 38% in samples B, C, D, and E, while the content of oleic acid ranged from approximately 29% to 34%. The GC/MS analysis confirmed that the standard SPF extract consisted of fatty acids and fatty acid ethyl esters. Sample E demonstrated a similar pattern to the standard samples in terms of oleic acid, lauric acid, and fatty acid esters. ATR-FT-IR analysis indicated that only sample E was predicted to contain 100% saw palmetto extract. Therefore, these study findings can be considered fundamental data for analyzing the physicochemical characteristics of the composition of SPF extract.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.3
• /
• pp.357-364
• /
• 2007

This research is to set a direction on the recycle of Discarded Automotive tires reforming them into heavy metal adsorbents by developing a particular functional group inducing formation of Chelate complexes with heavy metal ion in the water, on the surface of the used tire conventionally turned into powdered form. For this purpose, through FT-IR, XRD, XRF, SEM, elution test we confirmed and analyzed the property of newly reformed scrapped tires, and functional group. Also, by Kinetics Study we produced an invariable value applying to absorption models. Conclusively the absorption preference of heavy metal is determined to be $Pb^{2+}>Cu^{2+}>Cd^{2+}$, and it reached absorption balance within first 30 minutes, also the absorption reaction time increased from 0.27 to $1.78\sim3.15(g/mg{\cdot}min)$, and showed more than 80% of removal efficiency. This result proved that the efficiency increased by 10 times compared with the conventional powdered Discarded Automotive tires, and the Discarded Automotive tire which implemented the Functional group can exhibit a great efficiency as heavy metal adsorbent.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.9
• /
• pp.1301-1304
• /
• 2012

Mineral contents of various salts were determined by the ICP-OES method. Bamboo salt (baked 9 times) contained more potassium, calcium, magnesium, and manganese, compared to purified and solar salts. Bamboo salt had a pH of 11.04, higher than those of purified (6.29) and solar (9.13) salts. Contents of [$OH^-$] were measured by using the FT-IR spectra. Bamboo salt exhibited higher reduction potential and contained more OH groups than purified and solar salts. The reduction peak of bamboo salt was observed to be about three times broader than that of solar salt in terms of redox potential amperometry. At a salt concentration of 25%, bamboo salt showed higher radical scavenging activities (81.4%) than solar (5.0%) and purified (2.0%) salts, as evaluated by DPPH assay. Bamboo salt revealed alkaline property, more OH groups and antioxidative activity.

• Applied Chemistry for Engineering
• /
• v.29 no.1
• /
• pp.112-116
• /
• 2018

In this study, the mixing characteristics of water glass and additives (Si, alkali metal), which are one of the main raw materials of silicate based binder used in the production of molds during casting process, were examined. Molecular structures of water glass, additives and mixtures were analyzed FT-IR and viscosity measurements and their correlation were compared. The addition of Si source to the water glass accelerated the Si networking in the material and increased the viscosity. When the alkali metal was added, the viscosity of the water glass decreased by suppressing the Si networking of the water glass. Viscosities of the water glass and lithium silicate (LS) mixtures increased when the content of LS was less than 20 wt% and gradually decreased when the content was more than 20 wt%. By adding KOH to the water glass, the viscosity could be lowered and it could be used effectively to mix with colloidal silica (CS) or potassium methyl siliconate (PMS).