• 한국응용과학기술학회지
• /
• 제31권2호
• /
• pp.190-196
• /
• 2014

The sol-gel method was used to prepare binary metal oxide ($IrO_2-RuO_2$) pH sensor. The electrodes that mole percent compositions (mol%) of $IrO_2$ and RuO2 were 70:30 and 30:70 were selected. The characterizations of Nernstian response over pH range, response rate, interference on alkaline metals and reproducibility were investigated. Also the electroanalytical properties of these electrodes were evaluated in comparison with a commercial glass pH electrode. The composition of $IrO_2:RuO_2$ 70:30 mol% was chosen as better electrode formulation. The electrode was not susceptible to the action of interfering ions such as $Li^+$, $Na^+$ and $K^+$.

• 한국전기전자재료학회논문지
• /
• 제25권2호
• /
• pp.135-139
• /
• 2012

In this study, we synthesized the chalcogenide glass($Ge_{19}Sb_{23}Se_{58}$) for infrared optics by meltquenching method and verified the effect of cooling condition on the glass properties. The structural and optical properties of the glass were analyzed by XRD, FT-IR and SEM image. The glass synthesized under the cooling temperature of $980^{\circ}C$ shows transmittance of 58% at $8\sim12{\mu}m$, which was decreased as the cooling temperature was decreased. In addition, thermal and hardness also were measured. From the analysis results, we ascertained the feasibility as a molding materials for infrared optics.

• 한국표면공학회지
• /
• 제46권4호
• /
• pp.162-167
• /
• 2013

Encapsulation is required since organic materials used in OLED devices are fragile to water vapor and oxygen. Laser sealing method is currently used where IR laser is scanned along the glass-frit coated lines. Laser method is, however, not suitable to encapsulating large-sized glass substrate due to the nature of sequential scanning. In this work we propose a new method of encapsulation using Joule heating. Conductive layer is patterned along the sealing lines on which the glass frit is screen printed and sintered. Electric field is then applied to the conductive layer resulting in bonding both the panel glass and the encapsulation glass by melting glass-frit. In order to obtain uniform bonding the temperature of a conductive layer having a shape of closed loop should be uniform. In this work we conducted simulation for heat distribution according to the structure of a conductive layer used as a Joule-heat source. Uniform temperature was obtained with an error of 5% by optimizing the structure of a conductive layer. Based on the results of thermal simulations we concluded that Joule-heating induced encapsulation would be a good candidate for encapsulation method especially for large area glass substrate.

• 한국세라믹학회지
• /
• 제30권3호
• /
• pp.169-174
• /
• 1993

The porous silica glass prepared by the sol-gel method from the mixed solution of Si(OCH3)4, H2O, HCl and CH3OH with HCONH2 as a DCCA (Drying Control Chemical Additives). For investigation the characteristics of gels and glasses, we examined gels and glasses using TG-DTA, XRD, IR, SEM and porosimeter. The more content of formamide in the mixed solution increased, the more pore size and porosity of gel increased. In the excess formamide added gel, the properties of pore of gel were not so changed. The porous silica glass was prepared from the dry gel after heat treatment at 75$0^{\circ}C$. Porosity and mean pore size of the porous silica glass was 17~25% and 40~60$\AA$ relatively.

• 한국세라믹학회지
• /
• 제26권4호
• /
• pp.471-478
• /
• 1989

In this study we investigated the gelation time of sol which containing mixtures of TEOS with H2O, ethanol, HCl in the preparation of monolithic silica glass through Sol-Gel method. In this case apparent activation energies were observed by Arrhenius equation. We investigated the conversion from gel to glass in drying and heat treatment stages using DT-TG, FT-IR, XRD analysis and dried gel conversed to glass by heat treatment up to 85$0^{\circ}C$. The results of this experiment showed that the gelation time of solutions were promoted when increasing the amount of addition of H2O and HCl catalyst for TEOS and high reaction temperature of solution.

• 한국표면공학회지
• /
• 제41권3호
• /
• pp.88-93
• /
• 2008

Ir-Re thin films with Ti interlayer were deposited onto the tungsten carbide substrate by ion beam assisted DC magnetron sputtering. The Ir-Re films were prepared with targets of having two atomic percent of 7:3 and 5:5. The microstructure and surface analysis of the specimen were conducted by using SEM, XRD and AFM. Mechanical properties such as hardness and adhesion strength of Ir-Re thin film also were examined. The interlayer of pure titanium was formed with 100 nm thickness. The film growth of Ir-30at.%Re was faster than that of Ir-50at.%Re in the same deposition conditions. Ir-Re thin films consisted of dense and columnar structure irrespective of the different target compositions. The values of hardness and adhesion strength of Ir-30at.%Re thin film coated on WC substrate were higher than those of Ir-50at.%Re thin film.

• 한국세라믹학회지
• /
• 제39권2호
• /
• pp.194-198
• /
• 2002

$K_2O{\cdot}CaO{\cdot}P_2O_5$를 기본조성으로 하여 용융법에 의해 유리 형성범위를 정의하고자 하였다. TG-DTA와 DSC를 이용하여 열적 특성을 관찰하고자 하였으며, FT-IR과 Raman Spectroscopy를 이용하여 구조를 분석하였다. $K_2O{\cdot}CaO{\cdot}P_2O_5$의 함량이 증가함에 따라 유리전이온도 및 연화온도는 감소하였다. $K_2O{\cdot}CaO{\cdot}P_2O_5$ 유리의 기본 구조는 이웃한 구조와 상호 결합을 위한 $PO_2$와 $PO_4^{3-}$ 구조와 유리의 골격구조를 이루는 P-O-P 결합이며, CaO의 함량이 증가함에 따라, 유리내의 P-O-P의 결합력은 점차적으로 증가하였으며, $PO_2$와 $PO_4^{3-}$의 intensity는 점차적으로 감소하였다.

• 한국전기전자재료학회논문지
• /
• 제21권5호
• /
• pp.440-446
• /
• 2008

To manufacture the MLCC with X7R for high voltage stability, $BaTiO_3-MgO-MnO_2-Y_2O_3$ with $(Ba_{0.4}Ca_{0.6})SiO_3$ glass frit was formulated. Based on this composition, the addition of $Er_2O_3$ showed that TCC(Temperature Coefficient Capacitance) at $85^{\circ}C$ was improved from 5 % to ${\sim}0\;%$, but the dielectric constant and IR (Insulation Resistance) were decreased. The glass frit improved the dielectric constant and IR, so the appropriate contents of $Er_2O_3$ and glass frit were 0.6 mol% and 1 wt%, respectively. It showed that the dielectric constant and RC constant were 2,550 and 2,000 (${\Omega}F$), respectively in the sintering condition at $1250^{\circ}C$ in PO2 $10^{-7}$ Mpa. The MLCC with $3.2{\times}1.6$ (mm) size and $1\;{\mu}F$ was also suited for X7R with the above composition.

• Macromolecular Research
• /
• 제11권2호
• /
• pp.122-127
• /
• 2003

A glass-like carbon was fabricated using furan resin. The influence of heat treatment temperature during fabrication process on the chemical and micro-structural changes was studied by various analytical and spectroscopic methods including TGA, FT-IR, CHN, TEM and XRD. The chemical resistance properties of the fabricated glass-like carbon were also investigated. It has been found that the heat-treated samples at higher temperature up to 2600 $^{\circ}C$ in $N_2$ atmosphere had little weight loss, small amounts of functional groups, and high carbon content. The fabricated glass-like carbons upon heat treatment at 2600 $^{\circ}C$ showed an amorphous stage without any grain growth and/or reconstruction of structure. The glass-like carbon had much better chemical resistance than the artificial graphite, and exhibited a high chemical resistance due to its low surface areas, minimum impurities, and low graphite crystallites.

• 한국광학회지
• /
• 제17권5호
• /
• pp.480-486
• /
• 2006

일반적으로 모바일 폰용 적외선 차단 필터는 유리기판위에 $300^{\circ}C$ 이상의 고온에서 코팅된다. 본 연구에서는 PMMA(Poly methyl methacrylate)기판에 저온에서 $CeO_2$와 $SiO_2$를 사용하여 적외선 차단 필터를 코팅하였다. 저온 코팅된 필터의 접촉각을 측정하여 박막의 부착상태를 시험하였고, 적외선 차단 필터에 대한 시험 및 설계 결과를 모바일 폰용 광학계 개선에 적용하여 보았다.