• 대한전자공학회논문지SD
• /
• 제37권10호
• /
• pp.33-41
• /
• 2000

본 연구에서는 전압감도, 잡음등가전력, 비검출능 등이 초전특성들을 각 파라미터의 상호작용을 고려하여 3차원으로 모델링하였다. 그 결과, 전압응답특성은 저주파수 영역의 경우, 단면적에 대한 의존성 없이 두께가 작을수록 큰 전압응답을 보이고, 고주파수 영역의 경우는 20$G{\Omega}$의 부하저항에서 단면적이 작을수록 우수한 전압응답을 보이지만 두께에는 전혀 의존하지 않음을 알 수 있었다. 비검출능은 저주파수 영역에서 20$G{\Omega}$의 부하저항, $4{\times}10^{-10}m^2$ 이상의 단면적, 그리고 $1{\times}10^{-5}m$ 이하의 두께에서 아주 우수한 특성을 나타내었고, 고주파수 영역에서는 $1{\times}10^{-5}m$ 이하의 두께와 $2{\times}10^{-10}m^2$ 이상의 단면적에서 저항에 관계없이 높은 비검출능을 나타내었다. 또, 초전형 적외선 센서의 증폭 및 주파수 대역을 설정하기 위한 주변회로를 설계하였다. 본 연구에서는 1개의 단일 op-amp를 JFET의 드레인 부분의 단자에 연결한 quasi-boot-strap 회로를 사용하여, 2개의 op-amp를 이용한 상용화된 주변회로에 비해 약 56%의 잡음저하와 원하는 주파수 대역 및 증폭도를 얻을 수 있었다.

• 접착 및 계면
• /
• 제4권1호
• /
• pp.1-8
• /
• 2003

본 연구에서는 이관능성 에폭시와 PMR-15 블렌드계의 접촉각 측정과 파괴인성 측정을 통하여 PMR-15 조성비에 따른 표면자유에너지가 기계적 계면특성에 미치는 영향에 대하여 고찰하였다. 블렌드계의 FT-IR 분석 결과, PMR-15의 이미드화에 따른 특성 밴드가 1,722, $1,778cm^{-1}$ (C=O)와 $1,372cm^{-1}$ (C-N)에서 나타났고, 에폭시의 개환 반응에 따른 -OH peak는 PMR-15 phr의 함량에서 가장 크게 나타나는 것을 확인할 수 있었다. 증류수와 diiodomethane을 젖음액으로 사용하여 sessile drop 방법으로 접촉각을 측정한 결과, 표면자유에너지는 극성 요소의 증가에 의해서 PMR-15의 함량이 10 phr일 때 최고값을 나타내었다. 또한, 기계적 계면특성을 파괴인성 측정을 통하여 알아본 결과 $K_{IC}$와 $G_{IC}$ 또한 표면자유에너지와 유사한 경향을 나타내는 것을 알 수 있었는데, 이는 PMR-15 10 phr의 조성에서 수소결합의 증가에 의한 블렌드계의 극성요소가 증가함에 따라 분자들간의 계면결합력이 증가했기 때문인 것으로 관찰된다.

• 마이크로전자및패키징학회지
• /
• 제23권2호
• /
• pp.73-78
• /
• 2016

집적회로(Integrated Circuit) 소자의 트랜지스터(transistor) 밀도 증가는 소자에서 발생하는 열 방출(heat dissipation)의 급격한 상승을 초래하여 열 문제를 발생시키고, 이는 소자의 성능과 열적 신뢰성에 영향을 크게 미친다. 열문제의 해결방안 중 본 연구에서는 냉매를 이용한 액체 냉각방법을 연구하였으며, 실리콘 웨이퍼에 관통실리콘비아(through Si via)와 마이크로 채널(microchannel)을 딥 반응성 이온 애칭(deep reactive ion etching)로 구현한 후 유리기판과 어노딕본딩을 통하여 액체 냉각 구조를 제작하였다. 제작된 마이크로 채널 위에 Ag, Cu 또는 Cr/Au/Cu bump를 스크린프린팅(screen printing) 방법으로 형성하였고, 범프의 유무를 통해 액체 냉각 전후의 냉각 모듈의 실리콘 표면온도의 변화를 적외선현미경으로 분석하였다. Cr/Au/Cu bump가 탑재된 액체 냉각 모듈의 경우 가열온도 $200^{\circ}C$에서 냉각 전후의 실리콘 표면 온도 차이는 약 $45.2^{\circ}C$이고, 전력밀도 감소는 약 $2.8W/cm^2$ 이었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.532-534
• /
• 2004

The advancement of electronics and telecommunication technologies has forced the risk management system for underground metallic structures to evolve into the remote monitoring and control system. Especially, facilities such as gas pipelines, oil pipelines and water distribution lines might make hazardous effect on human safety without continuous monitoring and control. As a result, pipeline engineers have applied cathodic protection system to prevent the degradation of their facilities by corrosion and carried out a periodic monitoring of the pipe-to-soil (P/S) potentials at numberous test boxes along their pipelines. The latter action on a road in downtowns, however, is so much dangerous that the inspectors should be ready to suffer the threatening of their lives and maintenance. In order to minimize these social costs and hazards, a stand-alone type corrosion monitoring equipment which can be installed in test box, store the P/S data for given Belied and send the data by wired/wireless telecommunications is under development. In order to obtain the exact P/S data, however, a reference electrode should be located as close to the pipeline as possible. Actually, the measured potential by a conventional portable reference electrode contain inevitably an IR drop portion caused by the current flow from the cathodic protection rectifier or the subway railroad. To minimize this error, it is recommended that the reference electrode should be buried within 10 cm from the pipeline. In this paper, we describe the design parameters for fabricating the permanent type reference electrode and the characteristics of the developed reference electrode.

• 한국재료학회지
• /
• 제20권4호
• /
• pp.204-209
• /
• 2010

Recent high efficiency electronic devices have been found to have heat emission problems. As for LEDs, an excessive increase in the device temperature causes a drop of the luminous efficiency and circuit lifetime. Therefore, heat release in the limited space of such electronic parts is very important. This is a study of the possibility of using a coating of carbon materials as a solution for the thermal emission problem of electronic devices. Powdered carbon materials, cokes, carbon blacks, amorphous graphite, and natural flakes were coated with an organic binder on an aluminum sheet and the subsequent thermal emissivity was measured with an FT-IR spectrometer and was found to be in the range of $5{\sim}20\;{\mu}m$ at $50^{\circ}C$. The emissivity of the carbon materials coated on the aluminum sheet was shown to be over 0.8 and varied according to carbon type. The maximum thermal emissivity on the carbon black coated-aluminum surface was shown to be 0.877. The emissivity of the anodized aluminum sheets that were used as heat releasing materials of the electronic parts was reported to be in the range of 0.7~0.8. Therefore, the use of a coating of carbon material can be a potential solution that facillitates heat dissipation for electronic parts.

• 공업화학
• /
• 제20권5호
• /
• pp.511-516
• /
• 2009

폴리올레핀 복합소재의 UV 광열화 특성을 조사하였다. 열중량분석 결과, 3종의 폴리올레핀 복합소재는 서로 다른 talc 함유량을 가지고 있음을 확인하였다. SAE J1960 규격에 따라 UV 조사된 폴리올레핀 복합소재의 기계적 거동을 관찰하기 위해 인장시험 및 아이조드 충격 시험을 수행하였다. UV 노출 시간이 증가함에 따라 연신율과 저온 충격강도는 급격히 감소하였다. 이는 UV 광열화에 의한 폴리머 분자체인의 절단 및 얽힘 밀도 감소에 따른 탄성력의 감소에 기인한 것으로 보인다. 전자주사현미경 관찰을 통하여 UV 조사 후 표면상에 크랙이나 표면손상은 존재하지 않았지만, UV 노출에 따른 추가적인 talc 입자의 표면 노출을 관찰할 수 있었다. 이러한 talc 입자의 표면 노출은 폴리올레핀 복합소재의 변색 원인으로 추정된다. 적외선분광분석을 통하여, UV 조사된 폴리올레핀 복합소재의 표면상에 광열화가 진행되었음을 확인하였다.

• 한국태양에너지학회 논문집
• /
• 제35권4호
• /
• pp.67-75
• /
• 2015

PV module is conventionally connected in series with some solar cell to adjust the output of module. Some bypass diodes in module are installed to prevent module from hot spot and mismatch power loss. However, bypass diode in module exposed outdoor is easily damaged by surge voltage. In this paper, we study the thermal and electrical characteristics change of module with damaged bypass diode to easily find module with damaged bypass diode in photovoltaic system consisting of many modules. Firstly, the temperature change of bypass diode is measured according to forward and reverse bias current flowing through bypass diode. The maximum surface temperature of damaged bypass diode applied reverse bias is higher than that of normal bypass diode despite flowing equal current. Also, the output change of module with and without damaged bypass diode is observed. The output of module with damaged bypass diode is proportionally reduced by the total number of connected solar cells per one bypass diode. Lastly, the distribution temperature of module with damaged bypass diode is confirmed by IR camera. Temperature of all solar cells connected with damaged bypass diode rises and even hot spot of some solar cells is observed. We confirm that damaged bypass diodes in module lead to power drop of module, temperature rise of module and temperature rise of bypass diode. Those results are used to find module with a damaged bypass diode in system.

• Bulletin of the Korean Chemical Society
• /
• 제29권2호
• /
• pp.413-416
• /
• 2008

A synthesis route to ordered mesoporous carbons with controllable nitrogen content has been developed for high-performance EDLC electrodes. Nitrogen-doped ordered mesoporous carbons (denoted as NMC) were prepared by carbonizing a mixture of two different carbon sources within the mesoporous silica designated by KIT-6. Furfuryl alcohol was used as a primary carbon precursor, and melamine as a nitrogen dopant. This synthesis procedure gave cubic Ia3d mesoporous carbons containing nitrogen as much as 13%. The carbon exhibited a narrow pore size distribution centered at 3-4 nm with large pore volume (0.6-1 cm3 g-1) and high specific BET surface area (700-1000 m2 g-1). Electrochemical behaviors of the NMC samples with various N-contents were investigated by a two-electrode measurement system at aqueous solutions. At low current density, the NMC exhibited markedly increasing capacitance due to the increase in the nitrogen content. This result could be attributed to the enhanced surface affinity between carbon electrode and electrolyte ions due to the hydrophilic nitrogen functional groups. At high current density conditions, the NMC samples exhibited decreasing specific capacitance against the increase in the nitrogen content. The loss of the capacitance with the N-content may be explained by high electric resistance which causes a significant IR drop at high current densities. The present results indicate that the optimal nitrogen content is required for achieving high power and high energy density simultaneously.

• 한국재료학회지
• /
• 제21권12호
• /
• pp.685-689
• /
• 2011

The goal of this investigation was to produce a zirconia-family black ceramics that has enhanced functionality and reliability. Color zirconia ceramics have been produced by adding pigments. Pigments cause structural defects within zirconia and result in a drop in physical properties. Using environmentally friendly rice husk, we produced a black zirconia that is free of structural defects. In optimal firing conditions for black zirconia the calcining temperatures of the molding product are changed from $400^{\circ}C$ to $1200^{\circ}C$, and the firing temperatures are changed from $1400^{\circ}C$ to $1600^{\circ}C$. Color of testing the specimens was analyzed using Ultraviolet (UV) spectroscopy. Scanning Electron Microscope (SEM), EDAX (EDX), and Fourier transform infrared spectroscopy (FT-IR) analyses were carried out in order to examine impregnation properties and crystal phases. Universial Test Machine (UTM) was used to measure the flexual strength as well as the compressive strength. From experimental results, it was found that in optimal firing conditions the sample was calcined from $1000^{\circ}C$ to $1500^{\circ}C$. Commission internationalde I'Edairage (CIE) values of manufactured black zirconia color were $L^*$ = 29.73, $a^*$ = 0.23, $b^*$ = -2.68. The bending strength was 918 MPa and the compressive strength was 2676 MPa. These strength values are similar to typical strength values of zirconia, which confirms that carbon impregnation did not influence physical properties.

• Bulletin of the Korean Chemical Society
• /
• 제21권7호
• /
• pp.720-726
• /
• 2000

The analytic gradient method for the equation-of-motion coupled-cluster singles and doubles (EOM-CCSD) energy has been extended to employ a reduced molecular orbital (MO) space. Not only the innermost core MOs but also some of the outermost virtua l MOs can be dropped in the reduced MO space, and a substantial amount of computation time can be reduced without deteriorating the results. In order to study the magnitudes and trends of the effects of the dropped MOs, the geometries and vibrational properties of the ground and excited states of BF, CO, CN, N2, AlCl, SiS, P2, BCl, AIF, CS, SiO, PN and GeSe are calculated with different sizes of molecular orbital space. The 6-31 G* and the aug-cc-pVTZ basis sets are employed for all molecules except GeSc for which the 6-311 G* and the TZV+f basis sets are used. It is shown that the magnitudes of the drop-MO effects are about $0.005\AA$ in bond lengths and about 1% on harmonic frequencies and IR intensities provided that the dropped MOs correspond to (1s), (1s,2s,2p), an (1s,2s,2p,3s,3p) atomic orbitals of the first, the second, and the third row atoms, respectively. The geometries and vibrational properties of the first and the second excited states of HCN and HNC are calculated by using a drastically reduced virtual MO space as well as with the well defined frozen core MO space. The results suggest the possibility of using a very smalI MO space for qualitative study of valence excited states.