• The KIPS Transactions:PartC
• /
• v.17C no.1
• /
• pp.129-134
• /
• 2010

Intelligent Power Switch (IPS) is a semiconductor device which contains a logic circuit in itself. It has received significant attention as a switching component to substitute the fuse and relay components in common automobile since the internal logic provides the controllability on the loads. However, a control system for the IPS status control and a network system to share the status information of IPS are required to fully exploit the capabilities of IPS. In this paper, we propose a control circuit and algorithm using IPS. Also the communication system between the control systems and IPS components using Control Area network (CAN) are proposed.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.3
• /
• pp.5-13
• /
• 2007

The performance of innovative prestressed support (IPS) earth retention system applied in soft clay was investigated and presented. The IPS wale system provides a high flexural stiffness to resist the bending by lateral earth pressure, and transfers lateral earth pressure to strut supports. The IPS wale system provides a larger spacing of support than conventional braced and anchored systems. The IPS earth retention system was selected for temporary earth support in a building construction in North Busan area. The excavation was made 28.8 m wide, 52.0 m long, and 16.1 m deep through loose fill to soft clay. The IPS system consists of 650 mm thick slurry walls, and five levels of IPS wales and struts. Field monitoring data were collected including wall deflections at six locations, ground water levels at four locations, IPS wale deflections at thirty locations, and axial loads on struts at twenty locations, during construction. The IPS earth retention system applied in soft clay performed successfully within a designed criterion. Field measurements were compared with design assumptions of the IPS earth retention system. The applicability and stability of the IPS earth retention system in soft clay were investigated and evaluated.

• The Journal of Information Systems
• /
• v.32 no.1
• /
• pp.109-146
• /
• 2023

Purpose With Intelligent public service (IPS), it is possible to automate the quality of civil affairs, provide customized services for citizens, and provide timely public services. However, empirical studies on factors for the successful use of IPS are still insufficient. Hence, the purpose of this study is to empirically analyze the factors that affect the success of IPS with classification function. ISSM (Information System Success Model) is considered as the underlying research model, and how the algorithm quality, data quality, and environmental quality of the discrimination system affect the relationship between utilization intentions is analyzed. Design/methodology/approach In this study, a survey was conducted targeting users using IPS. After giving them a preliminary explanation of the intelligent public service centered on the discrimination system, they briefly experienced two types of IPS currently being used in the public sector. Structural model analysis was conducted using Smart-PLS 4.0 with a total of 415 valid samples. Findings First, it was confirmed that algorithm quality and data quality had a significant positive (+) effect on information quality and system quality. Second, it was confirmed that information quality, system quality, and environmental quality had a positive (+) effect on the use of IPS. Thirdly, it was confirmed that the use of IPS had a positive (+) effect on the net profit for the use of IPS. In addition, the moderating effect of the degree of knowledge on AI, the perceived accuracy of discriminative experience and IPS, and the user was analyzed. The results suggest that ISSM and TOE framework can expand the understanding of the success of IPS.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.11
• /
• pp.952-959
• /
• 2016

This paper proposes a novel indoor positioning system (IPS) that uses a calibrated camera sensor network and dense 3D map information. The proposed IPS information is obtained by generating a bird's-eye image from multiple camera images; thus, our proposed IPS can provide accurate position information when objects (e.g., the mobile robot or pedestrians) are detected from multiple camera views. We evaluate the proposed IPS in a real environment with moving objects in a wireless camera sensor network. The results demonstrate that the proposed IPS can provide accurate position information for moving objects. This can improve the localization performance for mobile robot operation.

• Journal of the Korean Society of Systems Engineering
• /
• v.16 no.2
• /
• pp.87-96
• /
• 2020

In this paper we proposed the test design method of reliability growth management. First, we presented the process for establishing the reliability growth management test design considering the number of failures and the termination test time. Reliability growth analysis of continuous system was performed in accordance with the test design process presented. In case the reliability test result is not met with the reliability target value after more than three failures occurred, the required test times were analyzed that 1,725 hrs for one corrective action, 1,950 hrs for two corrective actions. If the number of failures is less than three, design a reliability demonstration test according to confidence level 80% and 90% was performed using RGA 11 Software. As a result, it is possible to establish the reliability growth management test design with sufficient use of available resources. The results of this study can be used when establishing a test design for assessment of reliability growth management of all continuous systems.

• Journal of Korea Multimedia Society
• /
• v.9 no.8
• /
• pp.1037-1044
• /
• 2006

It's difficult to check cyber attacks and the performance of a security system in a real large-scale network. Generally, a new security system or the effect of a new security attack are checked by simulation. We use SSFNet to simulate our security system and cyber attack. SSFNet is an event-driven simulation tools based on process, which has a strength to be capable of expressing a large-scale network. But it doesn't offer any API's which can manipulate not only the related function of security but also the packet. In this paper, we developed a firewall and IPS class, used for a security system, and added to them components of SSFNet. The firewall is modelled a security system based on packet filtering. We checked the function of the firewall and the IPS with network modelled as using our SSFNet. The firewall blocks packets through rules of an address and port of packets. The result of this simulation shows that we can check a status of packets through a log screen of IPS installed in a router and confirm abnormal packet to be dropped.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.3
• /
• pp.231-242
• /
• 2008

Purpose: The purpose of this study was to investigate the bond strength of the core-veneer interface in all ceramic systems. Material and Methods: The all ceramic systems tested with their respective veneer were IPS Empress 2 with IPS Eris, IPS e.max Press with IPS e.max Ceram and IPS-e.max ZirCAD with IPS e.max Ceram. Cores (N=36, N=12/group, diameter: 10mm, thickness: 3mm) were fabricated according to the manufacturer's instruction and cleaned with ultrasonic cleaner. The veneer(diameter: 3mm, thickness: 2mm) were condensed in stainless steel mold and fired on to the core materials. After firing, they were again ultrasonically cleaned and embedded in acrylic resin. The specimens were stored in distilled water at $37^{\circ}C$ for 1 week. The specimens were placed in a mounting jig and subjected to shear force in a universal testing machine(Z020, Zwick, Germany). Load was applied at close to the core-veneer interface as possible with crosshead speed of 1.00mm/min until failure. Average shear bond strengths(MPa) were analyzed with a one-way analysis of variance and the Tukey test(${\alpha}=.05$). The failed specimens were examinated by scanning electron microscopy(JSM-6360, JEOL, Japan). The pattern of failure was classified as cohesive in core, cohesive in veneer, mixed or adhesive. Results: The mean shear bond strength($MPa{\pm}SD$) were IPS e.max Press $32.85{\pm}6.75MPa$, IPS Empress 2 $29.30{\pm}6.51MPa$, IPS e.max ZirCAD $28.10{\pm}4.28MPa$. IPS Empress 2, IPS e.max Press, IPS e.max ZirCAD were not significantly different from each others. Scanning electron microscopy examination revealed that adhesive failure did not occur in any all ceramic systems. IPS Empress 2 and IPS e.max Press exhibited cohesive failure in both the core and the veneer. IPS e.max ZirCAD exhibited cohesive failure in veneer and mixed failure.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2006.05a
• /
• pp.901-904
• /
• 2006

인터넷 사용자들의 무선 네트워크의 활용빈도가 점차 높아지고 무선 네트워크의 보안시스템도 요구되면서 무선 네트워크의 안정적이고 원활한 활용과 사용자의 정보 노출의 위험을 줄이고자 유무선 통합형 IDS/IPS도 개발되고 있는 단계다. 본 논문에서는 무선랜 환경을 지원하는 유무선 IPS시스템을 구현하고, 비정상적인 트래픽 탐지의 효율성을 높여 IPS 시스템의 성능향상에 기여정도를 파악 및 분석하였다. 본 논문에서 구축한 IPS시스템은 하이브리드 형태로 구현하였으며 Snort-inline[11]과 Snort-wireless[12] 모듈을 사용하여 무선 랜 이상탐지 기능을 구현하였다. 네트워크 모니터링 시스템으로 네트워크의 트래픽 상황을 파악하여 비정상적인 트래픽이 증가되었을 경우, 제안한 IPS시스템에서 비정상 트래픽의 탐지 및 차단 기능을 기존 IPS와 성능을 비교/분석하였다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.2
• /
• pp.294-303
• /
• 2024

The objective of condition-based maintenance plus(CBM+) is to improve the availability and maintenance efficiency of missiles, bolstering national defense capabilities. This study proposes an application of CBM+ to enhance the reliability and the safety of missiles, which are the devices typically stored for long durations. CBM+ CBM+ does not only contribute to defense capabilities, but it also aims to reduce maintenance costs. This study focuses particularly on the dormant stage of the missile life-cycle, in which various failure modes and environmental impacts on failure mechanisms are investigated. The effectiveness of maintenance strategies and the implementation of CBM+ is evaluated using simulation data.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.05d
• /
• pp.951-954
• /
• 2002

최근의 침입탐지시스템(IDS: Intrusion Detection System) 기술동향은 Misuse 방식의 규칙 데이터베이스 변경에 대한 한계성 때문에 Anomaly 방식의 NIDS(Network IDS)에 대한 연구가 고려되고 있다. 현재 국내에서 개발된 기존의 제품들은 대부분 Misuse 방식을 채택하고 있으며, 향후 국제 경쟁력을 갖추기 위해서는 Anomaly 방식의 기술 연구가 필요하다. 본 연구에서는 본 연구실에서 개발한 NIDS를 기반으로 연관 마이닝을 이용한 비정상 탐지 문제, 내부 정보 유출 차단 등에 대한 통합된 시스템 설계 방향을 제시하여 국가기관이나 기업이 보다 안전하게 침입을 관리할 수 있는 IPS(Intrusion Prevention System) 시스템을 설계한다.