• 제목/요약/키워드: IGZO film

검색결과 197건 처리시간 0.036초

Improvement of Device Characteristic on Solution-Processed InGaZnO Thin-Film-Transistor (TFTs) using Microwave Irradiation

  • Moon, Sung-Wan;Cho, Won-Ju
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제15권2호
    • /
    • pp.249-254
    • /
    • 2015
  • Solution-derived amorphous indium-gallium-zinc oxide (a-IGZO) thin-film-transistor (TFTs) were developed using a microwave irradiation treatment at low process temperature below $300^{\circ}C$. Compared to conventional furnace-annealing, the a-IGZO TFTs annealed by microwave irradiation exhibited better electrical characteristics in terms of field effect mobility, SS, and on/off current ratio, although the annealing temperature of microwave irradiation is much lower than that of furnace annealing. The microwave irradiated TFTs showed a smaller $V_{th}$ shift under the positive gate bias stress (PGBS) and negative gate bias stress (NGBS) tests owing to a lower ratio of oxygen vacancies, surface absorbed oxygen molecules, and reduced interface trapping in a-IGZO. Therefore, microwave irradiation is very promising to low-temperature process.

Light Effects of amorphous indium gallium zinc oxide thin-film transistor

  • Lee, Keun-Woo;Shin, Hyun-Soo;Heo, Kon-Yi;Kim, Kyung-Min;Kim, Hyun-Jae
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
    • /
    • pp.531-533
    • /
    • 2009
  • We've studied the optical and electrical properties of amorphous indium gallium zinc oxide thin-film transistor (a-IGZO TFT). When the a-IGZO TFT was illuminated at a wavelength of 660 nm, the offstate drain current was slightly increased, while below 550 nm it was increased significantly. The a-IGZO TFT was extremely sensitive, with deep-level defects at approximately 2.25 eV near the midgap.

  • PDF

Zno 버퍼층을 이용한 자발적 초격자구조를 갖는 IGZO 박막의 결정화 (Crystallization of IGZO thin film with spontaneously formed superlattice structure induced by Zno buffer layer)

  • 서동규;공보현;조형균
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2010년도 하계학술대회 논문집
    • /
    • pp.4-4
    • /
    • 2010
  • Single-crystalline IGZO (Indium-Gallium-Zinc oxide) was fabricated on c-sapphire substrate. Single crystal ZnO was used as a buffer layer, and post-annealing was treated in $900^{\circ}C$ for crystallization of IGZO. Crystallized IGZO formed superlattice structure spontaneously induced to c-axis direction by ZnO butTer layer, the composition of IGZO was varied by amount of ZnO. Crystallinity and composition of IGZO was analyzed by X-ray Diffraction and Transmission Electron Microscopy.

  • PDF

IGZO TFT의 캐리어 이동 경로 변화에 따른 특성 향상

  • 강금식;최혁우;노용한
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
    • /
    • pp.479-479
    • /
    • 2013
  • 산화물 반도체 물질을 이용한 Thin film transistor (TFT) 소자는 기존의 비정질 Si TFT와 저온 다결정 Si TFT 소자가 가지지 못하는 장점들이 보고되면서 차세대 디스플레이용 소자로 주목을 받고 있다. 그 중 TFT의 채널 물질로 a-IGZO가 많이 활용되고 있다. a-IGZO의 활용이 더 많아지고 있는 이유는 저온공정이 가능하고 3.2 eV의 큰 밴드갭으로 투명하며 높은 균일도, 캐리어 이동도를 모두 가지고 있기 때문이다. 본 연구에서는 산화물 물질인 IGZO를 채널 층으로 사용한 TFT소자에서 IGZO의 캐리어인 전자의 이동경로를 금속을 통하여 이동하게 함으로써 전기적 특성의 변화를 관찰하였다. TFT는 다수 캐리어가 게이트 전압에 의하여 박막 아래쪽에 채널을 형성하여 동작한다. 이 때 IGZO박막과 SiO2 사이의 Al을 증착하여 다수 캐리어인 전자의 이동도를 향상시켰다. 전극으로 사용되어지는 Al은 IGZO박막과 ohmic contant이기 때문에 전자의 이동이 어렵지 않기 때문이다. 소자 제작은 게이트로 도핑된 P형 기판을 사용하였고 게이트 절연체로 SiO2 200 nm를 증착하였다. 채널층로 IGZO를 증착하기 전에 게이트 절연체 위에 evaporation으로 Al을 20 nm를 증착하였다. 이때 mask는 $2.4{\times}10^{-4}cm^2$ 크기의 dot 형태를 사용하였다. Al을 증착 후 RF sputtering으로 IGZO를 30 nm 증착하였으며 $350^{\circ}C$에서 90 min 동안 열처리하였다. 소스와 드레인은 evaporation으로 Al을 100 nm 증착하였다. HB 4145B 측정기로 I-V 그래프를 통하여 전기적 특성의 변화를 관찰하였다.

  • PDF

증착 온도 및 수소 유량에 따른 IGZO 박막의 구조적 및 전기적 특성 (Structural and Electrical Characteristics of IGZO Thin Films Deposited at Different Substrate Temperature and Hydrogen Flow Rate)

  • 박수진;이규만
    • 반도체디스플레이기술학회지
    • /
    • 제15권4호
    • /
    • pp.46-50
    • /
    • 2016
  • In this study, we have investigated the effect of the substrate temperature and hydrogen flow rate on the characteristics of IGZO thin films for the TCO(transparent conducting oxide). For this purpose, IGZO thin films were deposited by RF magnetron sputtering at room temperature and $300^{\circ}C$ with various $H_2$ flow rate. In order to investigate the influences of the hydrogen, the flow rate of hydrogen in argon mixing gas has been changed from 0.1sccm to 1.0sccm. IGZO thin films deposited at room temperature show amorphous structure, whereas IGZO thin films deposited at $300^{\circ}C$ show crystalline structure having an (222) preferential orientation. The electrical resistivity of the amorphous-IGZO films deposited at R.T. was lower than that of the crystalline-IGZO thin films deposited at $300^{\circ}C$. The increase of electrical resistivity with increasing substrate temperature was interpreted in terms of the decrease of the charge carrier mobility. The transmittance of the IGZO films deposited at $300^{\circ}C$ was decreased deposited with hydrogen gas.

게이트 전극 물질이 a-IGZO 박막트랜지스터의 전기적 특성에 미치는 영향 (Effect of gate electrode material on electrical characteristics of a-IGZO thin-film transistors)

  • 오현곤;조경아;김상식
    • 전기전자학회논문지
    • /
    • 제21권2호
    • /
    • pp.170-173
    • /
    • 2017
  • 본 연구에서는 Al, Mo 및 Pt 금속 물질을 a-IGZO 박막트랜지스터의 게이트 전극으로 플라스틱 기판 위에 형성하여 제작하고, 게이트 물질에 따른 전기적 특성을 측정하였다. Al 게이트 전극에 비해 Pt 게이트 전극을 사용한 박막트랜지스터의 문턱전압은 -4.1V에서 -0.3 V까지 감소하였고, 전하이동도는 $15.8cm^2/V{\cdot}s$에서 $22.1cm^2/V{\cdot}s$ 로 향상되었다. 게이트 전극에 따른 박막트랜지스터의 문턱전압 이동은 전극의 일함수와 채널층의 페르미 에너지 차이로 인한 영향이라는 것을 확인 할 수 있었다. 또한, 채널 물질의 페르미 에너지를 고려하였을 경우에 Pt 게이트 전극이 박막트랜지스터의 전기적 특성 면에서 적합한 물질로 확인되었다. 추가적으로 Mo 게이트 전극을 사용한 박막트랜지스터에 대한 특성도 본 논문에서 다룬다.

비정질 InGaZnO4 박막의 전기적, 광학적 특성간의 상관관계 연구 (The Effect of Tail State on the Electrical and the Optical Properties in Amorphous IGZO)

  • 배성환;유일환;강석일;박찬
    • 한국세라믹학회지
    • /
    • 제47권4호
    • /
    • pp.329-332
    • /
    • 2010
  • In order to investigate the effect of tail state on the electrical and the optical properties in amorphous IGZO(a-IGZO), a-IGZO films were deposited at room temperature on fused silica substrats using pulsed laser deposition method. The laser pulse energy was used as the processing parameter. In-situ post annealing was carried out at $150^{\circ}C$ right after the film deposition. The $O_2$ partial pressure during the deposition and the post annealing was fixed to 10mTorr. The carrier mobility of the a-IGZO films had a range from 2 to $18\;cm^2/Vs$ at carrier concentrations greater than $10^{18}\;cm^{-3}$. As the laser energy density increased, the Hall mobility increased. And post annealing improved the Hall mobility, as well. The optical property was examined using the ultraviolet-visible spectroscopy. The a-IGZO films that have low Hall mobility exhibited stronger and broader absorption tails in >3.0 eV region. Post annealing reduced the intensity of the tail-like absorption. The absorption tail in a-IGZO films is an important factor which affects the electrical and the optical properties.

용액 공정으로 제작된 InGaZnO TFT의 인듐 조성비에 따른 문턱전압 변화 (Threshold voltage shift of solution processed InGaZnO thin film transistors with indium composition ratio)

  • 박기호;이득희;이동윤;주병권;이상렬
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2010년도 하계학술대회 논문집
    • /
    • pp.3-3
    • /
    • 2010
  • We investigated the influence of the indium content on the threshold voltage ($V_{th}$) shift of sol-gel-derived indium-gallium-zinc oxide (IGZO) thin film transistors (TFTs). Surplus indium composition ratio into IGZO decreases the value of $V_{th}$ of IGZO TFTs showed huge $V_{th}$ shift in the negative direction. $V_{th}$ shift decreases from 10 to -28.2V as Indium composition ratio is increased. Because the free electron density is increased according to variation of the Indium composition ratio.

  • PDF

4.1” Transparent QCIF AMOLED Display Driven by High Mobility Bottom Gate a-IGZO Thin-film Transistors

  • Jeong, J.K.;Kim, M.;Jeong, J.H.;Lee, H.J.;Ahn, T.K.;Shin, H.S.;Kang, K.Y.;Park, J.S.;Yang, H,;Chung, H.J.;Mo, Y.G.;Kim, H.D.;Seo, H.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
    • /
    • pp.145-148
    • /
    • 2007
  • The authors report on the fabrication of thin film transistors (TFTs) that use amorphous indium-gallium-zinc oxide (a-IGZO) channel and have the channel length (L) and width (W) patterned by dry etching. To prevent the plasma damage of active channel, a 100-nm-thckness $SiO_{x}$ by PECVD was adopted as an etch-stopper structure. IGZO TFT (W/L=10/50${\mu}m$) fabricated on glass exhibited the high performance mobility of $35.8\;cm^2/Vs$, a subthreshold gate voltage swing of $0.59V/dec$, and $I_{on/off}$ of $4.9{\times}10^6$. In addition, 4.1” transparent QCIF active-matrix organic light-emitting diode display were successfully fabricated, which was driven by a-IGZO TFTs.

  • PDF