• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.7
• /
• pp.1471-1478
• /
• 2011

A typical standard of vehicular ad hoc networks, WAVE which consists of IEEE 1609.x Family standards and IEEE 802.11p standard, includes the multi-channel coordination and channel synchronization function to provide safety services or public services during a car is driven. Generally, the performance of data communication and networking technologies is evaluated by using simulation tools, such as ns-2, OPNET, OPNET++, etc. However, these tools doesn't provide the operations of WAVE protocol. Therefore, in this paper, we implement and verify WAVE simulation program based on ns-2.

• Journal of IKEEE
• /
• v.17 no.2
• /
• pp.96-103
• /
• 2013

Since multimedia data takes large part of realtime transmission in wireless communication environments such as IEEE 802.11, QoS issues became one of the important problems with network performance. 802.11e MAC provides differentiated services based on priority schemes to solve existing 802.11 MAC problems. The TXOP is an important factor with the priority to improve network performance and QoS because it defines the time duration in which multiple frames can be transferred at one time for each station. In this paper, therefore frame sizes, TXOP Limit, and Priority values in accordance with the number of stations are experimented and derived for best network performance and QoS. Using 802.11e standard parameters, simulation results show the best throughput when the number of stations is 5 and TXOP Limit value is 6.016ms. For fairness, the best result is achieved at 3.008ms of TXOP Limit value and 15-31 of CW(Contention Window) that is lower priority than CW 7-15.

• Information and Communications Magazine
• /
• v.30 no.7
• /
• pp.26-32
• /
• 2013

본 고에서는 국제표준화 기구인 ITU-T와 국제표준화 단체인 IEEE 에서 진행중인 차세대 광가입자망 기술의 국제 표준화에 대해 알아본다. IUT-T의 study group 15 에서 TWDM-PON 기술과 PtP WDM 기술이 주내용인NG-PON2 기술표준화가 진행중이다. 그리고, 최근 IEEE 802.3 그룹에서는 NG-EPON 기술의 표준화 제안이 추진 중이다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.3
• /
• pp.685-690
• /
• 2013

This paper has proposed a multi-channel and wide gain-range baseband circuit blocks for the IEEE 802.15.4g MR-OFDM SUN systems. The proposed baseband circuit blocks consist of two negative-feedback VGAs, an active-RC 5th-order chebyshev low-pass-filter, and a DC-offset cancellation circuit. The proposed baseband circuit blocks provide 1 dB cut-off frequencies of 100 kHz, 200 kHz, 400 kHz, and 600 kHz respectively, and achieve a wide gain-range of +7 dB~+84 dB with 1 dB step. In addition, a DC-offset cancellation circuit has been adopted to mitigate DC-offset problems in direct-conversion receiver. Simulation results show a maximum input differential voltage of $1.5V_{pp}$ and noise figure of 42 dB and 37.6 dB at 5 kHz and 500 kHz, respectively. The proposed I-and Q-path baseband circuits have been implemented in $0.18-{\mu}m$ CMOS technology and consume 17 mW from a 1.8 V supply voltage.

• Journal of Korea Multimedia Society
• /
• v.15 no.7
• /
• pp.885-890
• /
• 2012

In this Paper, we propose a Real-Time Localization Platform Built on WUSB (Wireless USB) over WBAN (Wireless Body Area Networks) protocol required for Wearable Computer systems. Proposed Real-Time Localization Platform Technique is executed on the basis of WUSB over WBAN protocol at each sensor node comprising peripherals of a wearable computer system. In the Platform, a WUSB host calculates the location of a receiving sensor node by using the difference between the times at which the sensor node received different WBAN beacon frames sent from the WUSB host. And the WUSB host interprets motion of the virtual object.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.2
• /
• pp.13-25
• /
• 2008

In this paper, we propose the Location Awareness System adjusting Ranging Technology for CSS(Chirp Spread Spectrum) which is adopted on 2.45GHz standard in IEEE 802.15.4a and TOA(Time-of-Arrival) algorithm. The conventional methods have adopted RSSI, ultrasonic waves and infrared rays in Zigbee. RSSI measures strength indication of received signal and recognizes the position of nodes in RF boundary. However, this technology has the following problems; lots of error by the change of the channel environment and much power consumption. In this paper, adopting chirp pulse on 2.45GHz standard in IEEE 802.15.4a and SDS-TWR(Symmetrical Double Side-Two Way Ranging) method using the characteristic of Spread Spectrum, a new Location Awareness System is suggested. The distance and the coordinate are measured within ${\pm}\;5cm$ by TOA(Time of Arrival) algorithm and proposed algorithm and the data in error rate is decreased less than 1%. Through these results, the algorithm suggested in this paper is verified for its performance in a computer simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11B
• /
• pp.1272-1282
• /
• 2009

This paper consists of two parts: the protocol for tag-to-tag mesh network and the implementation of dual-radio RFID system. Recently, RFID has been adopted in ports or warehouse, being attached to containers and palettes for loading/unloading automation. However, the RFID system has encountered one problem - some tags cannot receive any command from reader intermittently due to signal interference by containers or field equipments (e. g. cranes and yard tractors). This area where reader signal cannot reach is called dead-zone. The proposed method for solving the dead-zone problem is as follows. A zone which can be communicated directly between readers and tags communicates in 433MHz frequency band in compliance with ISO/IEC 18000-7 standard. On the other hand, dead-zone communicates in 2.4GHz frequency band by using tag-to-tag mesh network in compliance with IEEE 802.15.4 standard. The proposed method can not only save much cost to install additional readers but also help resolve the dead-zone problem. Furthermore, it can provide the easier, faster, and more economical network infrastructure.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.7
• /
• pp.629-634
• /
• 2016

This paper describes the implementation of a ZigBee sensor node that can be utilized as a multiband and machine to machine (M2M) communication gateway. The IEEE 802.15.4-2003 standard was used as the wireless network frequency band. Ember's Type EM357 SoC was used as the transmission and reception device to perform the communication function, and it was also used for both the main M2M gateway and the sensor node. For the implementation of the operating protocol, EmberZNet Stack 4.5.4 from the Ember Corporation was used. The measurement of the reception sensitivity in the receiving module and the actual output signal from the reference were obtained from the transmission of a packet, and the packet included the M2M gateway within the attached ZigBee sensor. The packet error rate was measured as 0% with a -98 dBm reception sensitivity at the ZigBee frequency. In addition, excellent current characteristics of the ZigBee modules were shown by the implementation of the low-power circuit.

• Journal of Digital Convergence
• /
• v.11 no.7
• /
• pp.201-207
• /
• 2013

The chirp signaling has been mainly used in radar systems due to its good correlation characteristics, and nowadays it is applied to real time locating system(RTLS). The RTLS with chirp signaling was chosen as a standard such as ISO/IEC 24730-5 and IEEE 802.15.4a. In this paper, the performance of a real time locating system with chirp signaling was evaluated and simulated with relative distance error rates. We considered three cases of S/I = -30[dB], -20[dB], and -10[dB] with Rician factor K=10 and K=20. The performance was enhanced with K factor improvement by 25%, 27% and 50% for respective three cases of S/I. As results, in case of S/I < -20[dB], the minimum signal power is required for performance improvement even though the line of sight component is helpful. And also, in case of S/I ${\geq}$ -20[dB], as the line of sight component is stronger the better performance is obtained.

• Journal of Internet Computing and Services
• /
• v.16 no.2
• /
• pp.7-17
• /
• 2015

To provide scalability, wireless sensor network has cluster-based architecture. Wireless sensor network can be implemented based on the IEEE 802.15.4 which is exploited in 2.4GHz ISM frequency band. Since this frequency band is used for various data communication, network status of wireless sensor networks frequently changes according to wireless environment. Thus, wireless channel selection to avoid reduction of transmission efficiency is required. This paper estimates network status using the information that a cluster-head collects in a cluster. Through objective function with throughput, RSSI level and reliability as input parameters, this paper proposes proper wireless channel selection. Simulation results show that the proposed method maintains transmission efficiency even though network status changes.