• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.467-469
• /
• 2006

In wireless network environments, as users' demands on high-speed data communications due to increase of multi-media services, the necessity of new high-speed WLAN technologies has appeared. Nowaday, IEEE is standardizing a new WLAN protocol caned as IEEE 802.11n. To effectively use wireless resources, IEEE 802.11n introduces MAC aggregation function which is similar to that in IEEE 802.11e. In case of transmitting several frames without MAC aggregation, the frames include individual frame header and trailer, and their corresponding acknowledgement frames can appear on wireless link. However, if they are aggregated into single MAC frame, we can reduce the number of used bits due to frame headers/trailers and also remove redundant acknowledgement frames. In this paper, we explain two different MAC frame aggregation methods for IEEE 802.11e and IEEE 802.11n and evaluate their throughput by simulations.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.515-527
• /
• 2009

IEEE 802.11n is an ongoing next-generation WLAN(Wireless Local Area Network) standard that supports a very high-speed connection with more than 100Mb/s data throughput measured at the MAC(Medium Access Control) layer. Study trends of IEEE 802.11n show two aspects, enhanced data throughput using aggregation among packets in MAC layer, and better data rates adapting MIMO(Multiple-Input Multiple-Output) in PHY(Physical) layer. But, the former doesn't consider wireless channel and the latter doesn't consider aggregation among packets for reality. Therefore, this paper analyzes data throughput for IEEE 802.11n considering MAC and PHY connection. A-MPDU(Aggregation-MAC Protocol Data Unit) and A-MSDU(Aggregation-MAC Service Unit) is adapted considering multi-service in MAC layer, WLAN MIMO TGn channel using SVD(Singular Value Decomposition) is adapted considering MIMO and wireless channel in PHY layer. Consequently, Simulation results shows throughput between A-MPDU and A-MSDU. Also, We use Ns-2(Network simulator-2) for reality.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.4
• /
• pp.243-248
• /
• 2011

A FFT/IFFT processor is the key component for orthogonal frequency division multiplexing (OFDM) systems based IEEE 802.11n wireless local area network (WLAN). There exists many radix algorithms according to the structure of butterfly as FFT sub-module, each has the pros and cons on hardware complexity. Here, mixed radix algorithms for 64 and 128 FFT/IFFT processors are proposed, which reduce hardware complexity by using mixture of radix-23 and radix-4 algorithms. The proposed algorithm finish calculation within 3.2${\mu}s$ in order to meet IEEE 802.11n standard requirements and it has less hardware complexity compared with conventional algorithms.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.486-489
• /
• 2010

This paper describes a layered LDPC decoder which supports block length of 1,944 bits and code rate 1/2 for IEEE 802.11n WLAN standard. To reduce the hardware complexity, the min-sum algorithm and layered architecture is adopted. A novel memory reduction technique suitable for min-sum algorithm reduces memory size by 75% compared with conventional method. The designed processor has 200,400 gates and 19,400 bits memory, and it is verified by FPGA implementation. The estimated throughput is about 200 Mbps at 120 MHz clock by using Xilinx Virtex-4 FPGA device.

• Journal of Korea Multimedia Society
• /
• v.12 no.8
• /
• pp.1109-1119
• /
• 2009

WLAN(Wireless Local Area Network) standard is currently developing with increased wireless internet demand. Though existing IEEE 802.11e demonstrates that data rates exceed 54Mbps with assuring QoS(Quality of Service), wireless internet users can't be satisfied with real communication system. After IEEE 802.11e system, Study trends of IEEE 802.11n show two aspects, enhanced system throughput using aggregation among packets in MAC (Medium Access Control) layer, and better data rates adapting MIMO(Multiple-Input Multiple-Output) in PHY(Physical) layer. But, no one demonstrates IEEE 802.11n system performance results considering MAC and PHY connection. Therefore, this paper adapts MIMO in PHY layer for IEEE 802.11n system based on A-MPDU(Aggregation-MAC Protocol Data Unit) method in MAC layer considering MAC and PHY connection. SVD(Singular Value Decomposition) method with WLAN MIMO TGn Channel is used to analyze MIMO. Consequently, Simulation results show enhanced throughput and data rates compared to existing system. Also, We use Ns-2(Network Simulator-2) considering MAC and PHY connection for reality.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.19 no.6
• /
• pp.93-103
• /
• 2009

Recently, there is an increase in demand of real-time multimedia service in the WLAN environment, with a commercialization of IEEE 802.11n standard. However, the 802.1x authentication protocol is too slow to provide seamless real-time multimedia service, which defined in an IEEE 802.11i security standard. In this paper, a Ticket-based authentication mechanism in the CAPWAP(Control And Provisioning Wireless Access Point) architecture is introduced to support for the fast handoff.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.104-107
• /
• 2009

In this paper, we analyze the effect of interference between DTV system and IEEE 802.11n. We set DTV as a victim receiver and IEEE 802.11n as an interfering system. When they exist in the same area, they can make an interference effect. Therefore, we calculate a minimum coupling loss (MCL) and compare the resulting value with a path loss for determining whether there exists a potential interference or not. The minimum separation distance is determined when the path loss is larger than the MCL.

• The Journal of the Korea Contents Association
• /
• v.9 no.7
• /
• pp.67-75
• /
• 2009

IEEE 802.11 WLAN(Wireless Local Area Network) standard is currently developing with increased wireless internet demand. Study trends of IEEE 802.11n for high throughput show two aspects, enhanced system throughput using aggregation among packets in MAC(Medium Access Control) layer, and better data rates adapting MIMO(Multiple-Input Multiple-Output) in PRY(Physical) layer. But, no one demonstrates IEEE 802.11n system performance results considering MAC and PRY connection. This paper adapts A-MPDU(Aggregation-MAC Protocol Data Unit) method in MAC layer and MIMO in PRY layer for IEEE 802.11n system. Consequently, Simulation results show enhanced throughput and data rates compared to existing system. Also, We use NS-2(Network Simulator-2) considering MAC and PRY connection for reality.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.10 s.340
• /
• pp.39-50
• /
• 2005

In this paper, we propose a performance improving MAC algerian for the IEEE 802.11 DCF. WLAN based IEEE 802.11 uses two control methods called 'Distributed Coordination Function(UF)' and 'Point Coordination Function(PCF)'. The nF controls the Urnsmission based on carrier sense multiple access with collision detection(CSMA/CA), that decides a random backoff time with the range of contention window for each terminal. Normally, each terminal the CW double after collision, and reduces the CW to the minimum after successful transmission. This paper proposes an enhanced DCF algorithm that decreases the CW smoothly after successful transmission in order to reduce the collision Probability by utilizing the current status information of WLAN. We also analyze the throughput and delay performance for the unsaturated case mathematically. Simulation results show that our algorithm enhances the saturation throughput of WLAN. They also coincide well with the analytical results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.80-83
• /
• 2010

This paper describes an analysis of decoding performance of multi-mode LDPC(Low Density Parity Check) decoder which supports three block lengths (648, 1296, 1944) and four code rates (1/2, 2/3,3/4, 5/6) for IEEE 802.11n WLAN system. A fixed-point model of LDPC decoder which adopts min-sum algorithm and layered decoding scheme is implemented using Matlab. From fixed-point simulation results for various bit-width parameters such as internal bit-width, bit-width of integer and fractional parts, an optimal design condition and decoding performance of LDPC decoder are analyzed.