• 한국환경농학회지
• /
• 제36권2호
• /
• pp.119-128
• /
• 2017

본 연구는 최근 식생활 개선과 더불어 건강식의 원료로 수요가 크게 증가하고 있는 국내 유통 잡곡류에 대한 비소의 농도 수준을 확인하고, 비소를 구성하고 있는 화학종들을 분리 및 정량하여 섭취량에 따른 위해 수준을 확인하고자 하였다. 잡곡 12품목 188점을 현지 수거 후 분석에 활용하였는데, 총비소 분석은 일정량의 시료에 질산과 microwave를 이용하여 전처리한 후 ICP-MS를 이용하여 분석을 하였다. 비소 화학종 분리 및 정량을 위하여 HPLC로 화학종을 선택적으로 분리하고 검출기 역할을 하는 ICP-MS를 결합한 형태인 HPLC-ICP-MS를 이용하여 비소 화학종을 분리 분석하였다. 추출 용매로는 증류수, 말론산, 질산을 이용하여 추출 효율을 비교한 결과 1% 질산이 비소 화학종 모두에서 양호한 추출효율을 보여 최종적으로 1%질산을 추출용매로 선택하였고, 비소 화학종이 적절한 pH에서 전하를 띄는 특성을 고려하여 이동상으로는 ammonium carbonate, ammonium phosphate를 gradient 조건으로 분석하였다. 분석법 검증을 위하여 검출한계, 정량한계, 직선성 및 회수율 모두 AOAC에서 권장하는 기준을 만족하여 총비소 및 비소 화학종 분리 분석 결과에 대한 신뢰성을 확인하였다. 품목별 총비소 평균 농도는 찹쌀 $0.267{\pm}0.090mg/kg$, 검정현미 $0.241{\pm}0.137mg/kg$, 혼합곡 $0.183{\pm}0.045mg/kg$의 순으로 나타났고 무기비소 평균 농도는 찹쌀$0.149{\pm}0.056mg/kg$, 검정현미 $0.136{\pm}0.075mg/kg$, 혼합곡 $0.110{\pm}0.035mg/kg$의 순으로 총비소 결과값과 동일한 순서를 보였다. 총비소와 무기비소 농도의 상관 분석결과 총비소 농도가 높으면 무기비소 농도 또한 높은 농도를 보여 강한 양의 상관관계가 있음을 확인하였다. 위해 평가는 국민건강영양조사 자료(2012)를 근거로 잡곡에 대한 무기비소 위해 정도를 평가하였는데 품목별 무기비소 노출량은 혼합곡에서 $19.91{\mu}g/day$로 가장 높은 노출량을 보였고, 찹쌀 $1.07{\mu}g/day$, 검정현미 $0.77{\mu}g/day$, 보리 $0.13{\mu}g/day$, 콩 $0.11{\mu}g/day$ 순으로 나타났다. 품목별로는 혼합곡이 PTWI 대비 16.89%로 가장 높은 수준을 보였고, 찹쌀 0.91%, 검정현미 0.65%, 보리 0.11%, 콩 0.09%의 순으로 나타났다. 노출량에 따른 위해 수준은 잡곡 12품목 모두 일시에 섭취한다고 가정할 경우 PTWI 대비 18.69% 수준으로, 잡곡류에 대한 무기비소의 인체 노출 및 위해수준은 안전한 것으로 평가되었다.

• 대한임베디드공학회논문지
• /
• 제18권6호
• /
• pp.303-310
• /
• 2023

A single vision system limits the ability to accurately understand the spatial constraints and interactions between robots and dynamic workers caused by gantry robots and collaborative robots during production manufacturing. In this paper, we propose a 3D pose registration method for dynamic workers based on a multi-domain vision system for safety monitoring in manufacturing environments. This method uses OpenPose, a deep learning-based posture estimation model, to estimate the worker's dynamic two-dimensional posture in real-time and reconstruct it into three-dimensional coordinates. The 3D coordinates of the reconstructed multi-domain vision system were aligned using the ICP algorithm and then registered to a single 3D coordinate system. The proposed method showed effective performance in a manufacturing process environment with an average registration error of 0.0664 m and an average frame rate of 14.597 per second.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1997년도 제26회 추계학술대회
• /
• pp.59-65
• /
• 1997

The calibration of O.M.D is carried out experimentally and is analysed theoretically. O.M.D experimentally measures the change in optical density of artificially contaminated oil which contains Fe powder of 5, 10, 20, 30, 40, 50, 70, 100, 200 ppm. The change in optical density, D$_1$ means the logarithmic transmittance of I$_0$ over $I_1 D_2$ denotes the logarithmic transmittance I$_2$ over I$_1$ on electromagnetic force which arranges the ferrous particles along the line of magnetic force. The theoretical D$_1$ which increases linearly as increasing Fe concentrations, is analysed by light attenuation theory. The difference between theoretical D$_1$ and experimental D$_1$ is due to the attenuation of micro bubbles and the agglomeration of fine particles in the sample oil. The calibrated O.M.D is applied to the sample oil from the high-powered diesel engine. Also the results are compared with those out of the off-line techniques such as JOAP and ICP.

• Applied Science and Convergence Technology
• /
• 제23권4호
• /
• pp.161-168
• /
• 2014

A real-time monitoring of immersed antenna type inductively coupled plasma (ICP) was done with a homemade 2 dimensional voltage probe array to check the uniformity of the plasma. Measured voltage values with a high impedance voltmeter are close to the floating potential of the plasma. As the substrate carrier was moving into a magnetron sputtering plasma diffusive from a $125mm{\times}625mm$ size cathode, measured results showed reliably separation of plasma into the upper and lower empty space over the carrier. Infra red thermal imaging camera was used to observe the cross corner effect in situ without eroding a target to the end of the usage. 3 dimensional particle trace model was used to analyze the magnetron discharge's behavior.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.144-144
• /
• 2011

Diagnostics of plasma density and temperature play an important role for monitoring plasma processing and Laser Thomson scattering is a one of the most accurate diagnostic technique for measuring plasma density and temperature because of none-perturbation to plasma among various diagnostic techniques invented to measure plasma density and temperature. I will briefly review Laser Thomson scattering experiment performed in KRISS and difficulties for measuring the electron velocity distribution such as Gaussian due to low signal-to-noise ratio with showing results that we got until now. This work is an intermediate step in a process that we will get a reliable data which shows physical phenomenon of plasma compared with other diagnostic techniques and results.

• 약학회지
• /
• 제45권5호
• /
• pp.448-454
• /
• 2001

The contents of heavy metals in boiled Sibjeonaebotang with those in its herbal ingredients are compared. The herbal medicines of Sibjeonaebotang were bought at 10 defferent markets. The contents of 14 heavy metals (Ag, As, Ba, Cd, Cr Cu, Fe, Hg, Mn, Ni, Pb, Sb, Sn, Zn) were analysed using ICP It was found out that 5 heavy metals (Pb, As, Ba, Fe, Sb) were detected in only one boiled Sibjeonaebotang But they were detectable in all Sibjeonaebotang and its herbal before boiling. For example the content of Hg in one pack of Sibjeonaebotang before boiling was 0.064$\pm$0.016 me and Hg in boiled one was 0.002$\pm$0.005mg. These results suggest that boiled Sibjeonaebotang which we take is less harmful than herbal medicine itself by heavy metals.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2009년도 추계학술대회 초록집
• /
• pp.243-244
• /
• 2009

진공 chamber 내부 plasma를 외부에서 view port를 통한 확인 및 촬영보다 효율을 높이기 위하여 chamber 내부에 무선 camera (IVC : internal vacuum camera)를 삽입하여 더 세밀하게 plasma를 촬영하였고 view port로 확인이 불가능한 부분을 촬영 및 녹화하였다. 외부 view port로 확인할 수 없는 원거리 플라즈마 소스 (remote plasma source, RPS)와 in-line type의 chamber에서 동적 (dynamic) 증착이 이루어지는 substrate에 camera를 부착하여 이동 중 target 위쪽에 방전된 plasma, ICP (inductively coupled plasma) antenna를 진공 중 chamber 내부에서 촬영 및 녹화하였다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2009년도 추계학술대회 초록집
• /
• pp.116-117
• /
• 2009

식각 공정변화 즉 상부 ICP 파워, 반응기 압력, 실리콘 기판 온도변화에 따른 실리콘 딥 비어 (deep via) 의 형상 변화 메커니즘을 연구하였다. 메커니즘을 연구하기 위해 $SF_6/O_2$ 플라즈마에 노출된 실리콘 기판의 공정변화에 따른 표면 온도변화를 실시간으로 측정하여 플라즈마 내 positive ions의 거동을 분석하였다. 실리콘 기판의 표면온도를 상승시키는 주된 요인은 positive ions임을 확인할 수 있었으며 이는 기판에 적용된 negative voltage로 인하여 나타난 이온포격이 그 원인임을 알 수 있었다. 상대적으로 radical은 실리콘 표면온도 상승에 큰 역할을 하지 못하였다. 기판 표면온도가 상승 할수록 실리콘 딥 비어 구조에 undercut, local bowing과 같은 측벽 식각이 활성화됨을 확인할 수 있었으며 이는 기판에 들어오는 positive ions가 측벽식각을 유도하는 것으로 해석할 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제22권9호
• /
• pp.994-998
• /
• 2001

Ni, Fe and NiFe alloy thin films were electrodeposited at a polycrystalline Au surface using a range of electrolytes and potentials. Coulometry and EQCM were used for real-time monitoring of electroplating efficiency of the Ni and Fe. The plating efficiency of NiFe alloy thin films was computed with the aid of ICP spectrometry. In general, plating efficiency increased to a steady value with deposition time. Plating efficiency of Fe was lower than that of Ni at -0.85 and -1.0 V but the efficiency approached to the similar plateau value to that of Ni at more negative potentials. The films with higher content of Fe showed different stripping behavior from the ones with higher content of Ni. Finally, compositional data and real-time plating efficiency are presented for films electrodeposited using a range of electrolytes and potentials.

• Bulletin of the Korean Chemical Society
• /
• 제20권9호
• /
• pp.1040-1044
• /
• 1999

A micro porous PTFE membrane desolvator (MMD) was built and evaluated for the on-line removal of organic solvents to facilitate the determination of trace metal contaminants in the solvents by ICP-AES. Three organic solvents, isopropyl alcohol (IPA), methanol, and dimethy sulfoxide (DMSO) were studied. The MMD reduced organic solvent concentration in the sample aerosol stream by 82% to 89%, as indicated by monitoring C(I) emission. Net signal intensity of Fe, Al, and Cu was increasing with higher organic solvent concentration, with the rate of increase being solvent dependent. The signal intensities for Mg and Pb followed the trend with the C(I) signal. Changing the sweep gas flow rate affected the optimum signal intensity. Wine samples were analyzed by the method of standard addition. The concentrations of B, Al, and Mg were determined with a relative precision of less than 2.3%.