• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.12
• /
• pp.99-108
• /
• 2015

The embedded microcontroller which is operated by the logic gates synchronized on the clock pulse, is gradually used as main controller of mission-critical systems. Severe electrical situations such as high voltage/frequency surge may cause malfunctioning of the clock source. The tolerant system operation is required against the various external electric noise and means the robust design technique is becoming more important issue in system clock failure problems. In this paper, we propose on-chip backup clock change architecture for the automatic clock failure detection. For the this, we adopt the edge detector, noise canceller logic and glitch-free clock changer circuit. The implemented edge detector unit detects the abnormal low-frequency of the clock source and the delay chain circuit of the clock pulse by the noise canceller can cancel out the glitch clock. The externally invalid clock source by detecting the emergency status will be switched to back-up clock source by glitch-free clock changer circuit. The proposed circuits are evaluated by Verilog simulation and the fabricated IC is validated by using test equipment electrical field radiation noise

• Journal of Mushroom
• /
• v.11 no.3
• /
• pp.131-136
• /
• 2013

The effects of fixed and variable relative humidity on fruiting body formation and characters of Pleurotus eryngii were investigated with normal and thinning treatment plots. In fixed relative humidity, as humidity was lower, period of harvest was longer as well as days for pinheading in the both of normal and thinning plots. In the normal plot, qualities of mushroom were 5.5, 5.8, and 6.3 and yield was 98.6 g per bottle for 90% relative humidity, it was best. In the thinning plot, qualities of mushroom were 7.7, 8.4, and 8.5 and yields were 102.1, 105.8, and 116.9 g at 70, 80, and 90% respectively. In variable relative humidity with a thinning plot, the yield of P. eryngii on condition I(>90% for 1 day ${\rightarrow}$ 85% until thinning(for about 11 days) ${\rightarrow}$ 80%) and III(>90% until pin-heading(about for a week) ${\rightarrow}$ 85% until thinning(about for 5 days) ${\rightarrow}$ 80%) were 85.5 and 87.8 g per bottle, and qualities were 7.8 and 8.0 respectively. For long shelf life and a cultural control of bacterial soft rot disease, the condition I will be more largely adopted by mushroom farmers.

• Korean Security Journal
• /
• no.9
• /
• pp.69-98
• /
• 2005

The security industry for civilians (Private Security), was first introduced to Korea via the US army's security system in the early 1960's. Shortly after then, official police laws were enforced in 1973, and private security finally started to develop with the passing of the 'service security industry' law in 1976. Korea's Private Security industry grew rapidly in the 1980's with the support of foreign funds and products, and now there are thought to be approximately 2000 private security enterprises currently running in Korea. However, nowadays the majority of these enterprises are experiencing difficulties such as lack of funds, insufficient management, and lack of control over employees, as a result, it seems difficult for some enterprises to avoid the low production output and bankruptcy. As a result of this these enterprises often settle these matters illegally, such as excessive dumping or avoiding problems by hiring inappropriate employees who don't have the right skills or qualifications for the jobs. The main problem with the establishment of this kind of security service is that it is so easy to make inroads into this private service market. All these hindering factors inhibit the market growth and impede qualitative development. Based on these main reasons, I researched this area, and will analyze and criticize the present condition of Korea's private security. I will present a possible development plan for the private security of Korea by referring to cases from the US and Japan. My method of researching was to investigate any related documentary records and articles and to interview people for necessary evidence. The theoretical study, involves investigation books and dissertations which are published from inside and outside of the country, and studying the complete collection of laws and regulations, internet data, various study reports, and the documentary records and the statistical data of many institutions such as the National Police Office, judicial training institute, and the enterprises of private security. Also, in addition, the contents of professionals who are in charge of practical affairs on the spot in order to overcomes the critical points of documentary records when investigating dissertation. I tried to get a firm grasp of the problems and difficulties which people in these work enterprises experience, this I thought would be most effective by interviewing the workers, for example: how they feel in the work places and what are the elements which inpede development? And I also interviewed policemen who are in charge of supervising the private escort enterprises, in an effort to figure out the problems and differences in opinion between domestic private security service and the police. From this investigation and research I will try to pin point the major problems of the private security and present a developmental plan. Firstly-Companies should unify the private police law and private security service law. Secondly-It is essential to introduce the 'specialty certificate' system for the quality improvement of private security service. Thirdly-must open up a new private security market by improving old system. Fourth-must build up the competitive power of the security service enterprises which is based on an efficient management. Fifth-needs special marketing strategy to hold customers Sixth-needs positive research based on theoretical studies. Seventh-needs the consistent and even training according to effective market demand. Eighth-Must maintain interrelationship with the police department. Ninth-must reinforce the system of Korean private security service association. Tenth-must establish private security laboratory. Based on these suggestions there should be improvement of private security service.

• Journal of Trauma and Injury
• /
• v.19 no.2
• /
• pp.164-172
• /
• 2006

Background: The authors conducted a retrospective study to evaluate the mechanism of injury, the surgical techniques, the clinical features, the combined injuries, the treatment results, and the surgical complications in patients with atlantoaxial fracture/subluxations. Methods: The authors reviewed 71 cervical fracture/dislocations during a four-year period from September 2002 to August 2006. Among them, there were twenty one C1,2 fracture/subluxations. There were thirteen men (mean age : 43.5 years) and eight women (mean age : 50 years). Their follow-up period was at least 6 months, and the mean follow-up period was 9.6 months. Gardner-Wells tongs traction was used in all patients immediately on presentation. Surgical treatment was performed, depending on the pathologic conditions. Results: Of all 21 cases, 14 cases were injured in motor vehicle accidents, 5 were falls, and 2 were miscellaneous. There were four C1 fracture (5.6%), fourteen C2 fracture (66.7%), one C1 and 2 combined fracture (4.8%), and one C1-2 subluxation (4.8%). The C1 fractures in our series were classified as two Jefferson's fractures and two C1 lateral mass fracture. The C2 fractures were classified as one odontoid type I fracture, two odontoid type II fractures, five odontoid type III fractures, one hangman's fracture, and four C2 body tear-drop fractures. Atlantoaxial fractures were associated with six (28.6%) head injuries, four (19.0%) other spinal injuries, two (9.5%) chest injuries, and three (14.3%) spinal cord injuries. Surgical treatment was performed in nine cases, which included anterior odontoid screw fixation in two cases, transarticular screw fixation with iliac bone graft in one case, posterior fixation by using C2 pedicle screw and C3 lateral mass screw in three cases, lateral mass screw fixation C1-2 with iliac bone graft in one case, O(occipito)-C1-3-4 screw fixation in one case, posterior C2-3 wiring with allograft in one case, and halo vest in six cases. Conservative management was used in the rest of the patients in our trials. Bone fusion was complete in all cases. There were no operation-related complication, except one pin site infection in the case of halo vest. Conclusion: In this study, the choice of appropriate treatment according to the fracture types resulted in safe and effective management of unique atlantoaxial fracture/subluxations.

• Clinical and Experimental Reproductive Medicine
• /
• v.23 no.1
• /
• pp.103-108
• /
• 1996

Through the previous studies(I,II), it was observed that human follicular fluid(HFF) was more effective than human fetal cord serum(HFCS) on promoting meiotic resumption of oocytes and improving embryonic development of mouse in vitro. On the basis of these results, we have gradually exchanged HFCS with HFF as protein supplement in human ART. This study was performed to investigate the efficiency of HFF on improving the pregnancy rate in ART. Oocytes were retrieved transvaginally from patients treated with pituitary suppression with GnRH-agonist and ovarian stimulation with human menopausal gonadotro-pin(HMG) and pure follicle stimulating hormone(FSH). Aspirated oocytes were rinsed and cultured in TCM-199 containing HFF, and the concentrations of HFF were adjusted to 10, 20, and 30% according to the use for insemination, embryo growth and embryo transfer, respectively. As possible as, we tried to do embryo transfer into fallopian tube to mimic the coincidence of the cell stage with the place of sojourn in vivo, so we performed various ART programs(IVF & ET; in vitro fertilization, ZIFT; zygote intra fallopian-tube transfer, ZIFT & ET) according to the tubal conditions of patients. On the while, intra cytoplasmic sperm injection(ICSI) was used to assist IVF of the patients who had shown poor standard IVF results by immunological or severe male factor. Of the 255 cycles of ART programs using HFF as protein supplement, 118 cycles were turn out to be succeeded in pregnancy(46.2%, per cycle, p<0.05), while 21 pregnancies were achieved in the 69 cycles using HFCS(30.4%). The 255 cycles using HFF were subdivided into cycles with the type of ART programs, and each pregnancy rate of the ART programs were 44.7% (IVF & ET, 76/170 cycles), 53.4%(ZIFT, 31/58 cycles) and 40.7% (ZIFT & ET, 11/27 cycles), respectively. In the 61 ICSI cycles using HFF, 28 cycles succeed in pregnancy(45.9%), while 7 pregnancies were obtained in the 17 ICSI cycles using HFCS. Also the ongoing pregnancy rate in the group using HFF(78.8%, 93/118 cycles) was higher than that in the group using HFCS(61.9%). Therefore, we found that the use of HFF as protein supplement was more suitable and effective than the use of HFCS to improve the pregnancy rate in ART.

• Korean Journal of Materials Research
• /
• v.4 no.4
• /
• pp.459-465
• /
• 1994

A-axis oriened YBCO thin flims were grown on $LaAIO_{3}$ single crystal substrate by off-axis rf magnetron sputtering method. We used two kinds of process to get a-axis oriented fi1ms;one-step process and two-step process. In one-step process, films are grown in single step in which substrate temperature( $T_s$) is in the range of $590^{\circ}C$ to $680^{\circ}C$. On the other hand, in two step process a-axis oriented thin film templates i f about 30nm thickness is deposited at low temperature first, and subsequently films are grown at elevated temperature to the final thickness of about 100nm. In the case of one step process($T_s$ ~)$600^{\circ}C$), prefered a-axis orientation is dominant and Cu-rich phases segregate at the surface. Segregations decrease and ($00 \ell$) peaks increase upon increasing $T_s$. The films prepared by two step method appeared to have strong(h00) peaks as the deposition rate increased. Microstructure shows pin holes resulted from mixed phases of a-axis and c-axis oriented films. In both cases of one step and two step process, as TS decreases, prepared films show stronger a-axis orientation. However electrical properties of the films are depressed with lower $T_c$ and wider $\Delta T$ as $T_s$ decreases.

• Parasites, Hosts and Diseases
• /
• v.50 no.3
• /
• pp.207-213
• /
• 2012

The egg morphology of minute intestinal flukes (MIF) that can occur as human infections in the Republic of Korea, i.e., Metagonimus yokogawai, M. miyatai, M. takahashii, Heterophyes nocens, Heterophyopsis continua, Stellantchasmus falcatus, Stictodora fuscata, Pygidiopsis summa, and Gymnophalloides seoi, was studied in comparison with Clonorchis sinensis. The adult worms were obtained from residents of endemic areas, and their intrauterine eggs were studied and measured using light microscopy; the length, width, length-width ratio (LWR), and Faust-Meleney index (FMI). Several specimens were processed for scanning electron microscopy (SEM), and before gold-coating, the uterine portion of each fluke was etched with a sharp pin in order to expose the eggs. The MIF eggs were ovoid, pyriform, or elliptical with a size range of $21-35{\times}12-21{\mu}m$. S. fuscata eggs revealed the highest FMI (largest in the area) and lowest LWR, whereas P. summa eggs showed the lowest FMI and medium LWR. SEM revealed that G. seoi and S. fuscata had remarkably clean shell surface lacking the muskmelon-like structure which is prominent in C. sinensis eggs. In Metagonimus spp., H. continua, H. nocens, and S. falcatus eggs, minute surface ridges were recognizable though less prominent compared with C. sinensis. On the surface of P. summa eggs, thread-like curly structures were characteristically seen. The results revealed that important differential keys for MIF eggs include the length, width, area (FMI), shape of the eggs, and the extent of the muskmelon-like structure or ridges on their shell surface and operculum.

• Current Optics and Photonics
• /
• v.1 no.2
• /
• pp.107-112
• /
• 2017

An adaptive optics system can be simulated or analyzed to predict its closed-loop performance. However, this type of prediction based on various assumptions can occasionally produce outcomes which are far from actual experience. Thus, every adaptive optics system is desired to be tested in a closed loop on an optical test bench before its application to a telescope. In the close-loop test bench, we need an atmospheric simulator that simulates atmospheric disturbances, mostly in phase, in terms of spatial and temporal behavior. We report the development of an atmospheric turbulence simulator consisting of two point sources, a commercially available deformable mirror with a $12{\times}12$ actuator array, and two random phase plates. The simulator generates an atmospherically distorted single or binary star with varying stellar magnitudes and angular separations. We conduct a simulation of a binary star by optically combining two point sources mounted on independent precision stages. The light intensity of each source (an LED with a pin hole) is adjustable to the corresponding stellar magnitude, while its angular separation is precisely adjusted by moving the corresponding stage. First, the atmospheric phase disturbance at a single instance, i.e., a phase screen, is generated via a computer simulation based on the thin-layer Kolmogorov atmospheric model and its temporal evolution is predicted based on the frozen flow hypothesis. The deformable mirror is then continuously best-fitted to the time-sequenced phase screens based on the least square method. Similarly, we also implement another simulation by rotating two random phase plates which were manufactured to have atmospheric-disturbance-like residual aberrations. This later method is limited in its ability to simulate atmospheric disturbances, but it is easy and inexpensive to implement. With these two methods, individually or in unison, we can simulate typical atmospheric disturbances observed at the Bohyun Observatory in South Korea, which corresponds to an area from 7 to 15 cm with regard to the Fried parameter at a telescope pupil plane of 500 nm.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.48 no.6
• /
• pp.48-57
• /
• 2020

This study was aimed to determine the history of Son keechung laurel tree, which is designated and managed as Seoul Metropolitan Government Monument No. 5. Sohn keechung's victory in the marathon at the 1936 Berlin Olympics served as an opportunity to encourage great pride and national spirit for the Korean people's national spirit who had spent their painful days under Japanese colonial rule. The seedlings that Son keechung received at the time are currently growing at Son Keechung Sports Park on the hill in Manri-dong, west of Seoul Station, and are Quercus palustris. That variety of Tree is native to the United States. The 11th Berlin Olympics, held in 1936, is a golden opportunity for Hitler to show off the history and cultural excellence of the German race, so it does not make sense to award victors an American giant oak instead of the German oak tree. The Seoul Metropolitan Government and various media outlets made a fait accompli due to Hitler's simple mistake. However, this study revealed that the laurel that Son received was the Quercus robur, based on the articles of the Korean newspaper, the German daily newspaper, and the recently introduced article of Der Spiegel, a leading German weekly magazine. Based on these circumstances, I would like to suggest that the originally awarded Quercus robur be planted in Son keechung Memorial Park and that the newly discovered history be notified on the Seoul Metropolitan Government website and various records.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4D
• /
• pp.671-678
• /
• 2006

In this study, to describe vehicle-structure dynamic interaction phenomena with 1/4 vehicle model, nonlinear Hertzian contact spring and nonlinear contact damper are adopted. The external loads acting on 1/4 vehicle model are selfweight of vehicle and geometry information of running surface. The constraint equation on contact surface is implemented by the Penalty method with stabilization and the reaction from constraint violation. To describe pitching motion of various vehicles two types of the displacement constraint equations are exerted to connect between car bodies and between bogie frames, i.e., the rigid body connection and the rigid body connection with pin, respectively. For the time integration of dynamic equations of vehicles and structure Newmark time integration scheme is adopted. To reduce the error caused by inadequate time step size, adaptive time-stepping technique is also adopted. Thus, it is expected that more versatile dynamic interaction phenomena can be described by this approach and it can be applied to various railway dynamic problems with low computational cost.