• Applied Biological Chemistry
• /
• v.7
• /
• pp.85-91
• /
• 1966

Paper electrophoretic separation of soybean protein using phosphate buffer(pH. 7.6, I. 0.18) was carried out and revealed five components. The ratio of each component extracted with the phosphate buffer was estimated as follows. Component %(aver.) Component I 14.47 Component II 7.22 Component III 4.43 Component IV 71.7 Component V 2.18 Also, each component of phosphate buffer extract was identified as: Component identified Component I identified phaseolin Component II identified glutelin Component III identified $albumin\;{\alpha}$ Component IV identified glycinin Component V identified $albumin\;{\alpha}$ The quantitative determination of the components was performed with twenty five varieties of Korean soybean and turned out to indicate marked difference between the varities in the ratio of the components.

• Steel and Composite Structures
• /
• v.32 no.3
• /
• pp.337-346
• /
• 2019

The present paper tries to contribute fill the gap of application of the component method to tubular connections. For this purpose, one typical joint configuration in which just one component can be considered as active has been studied. These joints were selected as symmetrically loaded welded connections in which the beam width was the same as the column width. This focused the study on the component 'side walls of rectangular hollow sections (RHS) in tension/compression'. It should be one of the main components to be considered in welded unstiffened joints between I beams and RHS columns. Many experimental tests on double-sided I-beam-to-RHS-column joint with a width ratio 1 have been carried out by the authors and a finite element (FE) model was validated with their results. Then, some different analytical approaches for the component stiffness and strength have been assessed. Finally, the stiffness proposals have been compared with some FE simulations on I-beam-to-RHS-column joints. This work finally proposes the most adequate equations that were found for the stiffness and strength characterization of the component 'side walls of RHS in tension/compression' to be applied in a further unified global proposal for the application of the component method to RHS.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.492-497
• /
• 2005

It has not been studied about modeling methods for SVG documents to represent animation in the web that has been recently increased in interest. In this paper, I propose component modeling for SVG documents by CBD methodology. First, I propose conceptual modeling by UML class diagrams for converting SVG document into component diagram. And then, I propose rules to convert the UML class diagram into component diagram. Thus, main contribution of this paper is that it can generate a component diagram for a SVG document using Component-Based Development methodology.

• Korean Journal of Mathematics
• /
• v.5 no.1
• /
• pp.55-60
• /
• 1997

A continuum structure function(CSF) is a non-decreasing mapping from the unit hypercube to the unit interval. The reliability importance of component $i$ in a CSF at system level ${\alpha}$, $R_i({\alpha})$) say, is zero if and only if component $i$ is almost irrelevant to the system at level ${\alpha}$. A condition to check whether a component is almost irrelevant to the system is presented. It is shown that $R^{(m)}_i({\alpha}){\rightarrow}R_i({\alpha})$ uniformly as $m{\rightarrow}{\infty}$ where each $R^{(m)}_i({\alpha})$ is readily calculated.

• Journal of the Korean Statistical Society
• /
• v.20 no.1
• /
• pp.67-76
• /
• 1991

The empirical Bayes version involves ″independent″ repetitions(a sequence) of the component decision problem. With the varying sample size possible, these are not identical components. However, we impose the usual assumption that the parameters sequence $\theta$=($\theta$$_1$, $\theta$$_2$, …) consists of independent G-distributed parameters where G is unknown. We assume that G $\in$ g, a known family of distributions. The sample size $N_i$ and the decisin rule $d_i$ for component i of the sequence are determined in an evolutionary way. The sample size $N_1$ and the decision rule $d_1$$\in$ $D_{N1}$ used in the first component are fixed and chosen in advance. The sample size $N_2$and the decision rule $d_2$ are functions of *see full text($\underline{X}^1$equation omitted), the observations in the first component. In general, $N_i$ is an integer-valued function of *see full text(equation omitted) and, given $N_i$, $d_i$ is a $D_{Ni}$/-valued function of *see full text(equation omitted). The action chosen in the i-th component is *(equation omitted) which hides the display of dependence on *(equation omitted). We construct an empirical Bayes decision rule for estimating normal mean and show that it is asymptotically optimal.

• Bulletin of the Korean Mathematical Society
• /
• v.57 no.3
• /
• pp.649-660
• /
• 2020

This paper proves a new regularity criterion for solutions to the Cauchy problem of the 3D Boussinesq equations via one directional derivative of the horizontal component of the velocity field (i.e., (∂_iu₁; ∂_ju₂; 0) where i, j ∈ {1, 2, 3}) in the framework of the anisotropic Lebesgue spaces. More precisely, for 0 < T < ∞, if $$\large{\normalsize\displaystyle\smashmargin{2}{\int\nolimits_o}^T}({\HUGE\left\|{\small{\parallel}{\partial}_iu_1(t){\parallel}_{L^{\alpha}_{x_i}}}\right\|}{\small^{\gamma}_{L^{\beta}_{x_{\hat{i}}x_{\bar{i}}}}+}{\HUGE\left\|{\small{\parallel}{\partial}_iu_2(t){\parallel}_{L^{\alpha}_{x_j}}}\right\|}{\small^{\gamma}_{L^{\beta}_{x_{\hat{i}}x_{\bar{i}}}}})dt<{{\infty}},$$ where ${\frac{2}{{\gamma}}}+{\frac{1}{{\alpha}}}+{\frac{2}{{\beta}}}=m{\in}[1,{\frac{3}{2}})$ and ${\frac{3}{m}}{\leq}{\alpha}{\leq}{\beta}<{\frac{1}{m-1}}$, then the corresponding solution (u, θ) to the 3D Boussinesq equations is regular on [0, T]. Here, (i, ${\hat{i}}$, ${\tilde{i}}$) and (j, ${\hat{j}}$, ${\tilde{j}}$) belong to the permutation group on the set 𝕊₃ := {1, 2, 3}. This result reveals that the horizontal component of the velocity field plays a dominant role in regularity theory of the Boussinesq equations.

• Journal of the Korean Society of Systems Engineering
• /
• v.16 no.1
• /
• pp.84-97
• /
• 2020

This paper aims to develop an optimized inventory management method for safety critical Instrument and Control (I&C) components. In this regard, the paper focuses on estimating the consumption rate of I&C components using demand forecasting methods. The target component for this paper is the Foxboro SPEC-200 controller. This component was chosen because it has highest consumption rate among the safety critical I&C components in Korean OPR-1000 NPPs. Three analytical methods were chosen in order to develop the demand forecasting methods; Poisson, Generalized Linear Model (GLM) and Bootstrapping. The results show that the GLM gives better accuracy than the other analytical methods. This is because the GLM considers the maintenance level of the component by discriminating between corrective and preventive.

• The Korean Journal of Physiology
• /
• v.18 no.1
• /
• pp.9-17
• /
• 1984

The second inward current $(i_{si})$ was studied by the two microelectrode voltage clamp technique in the sino-atrial node of the rabbit. The slow component $(i_{si,2})$ of the second inward current was sometimes identified and $i_{si}$ behaved as if it were a mixture of two currents. We analysed the $(i_{si,2})$ in relation to membrane potential and frequency of voltage clamp pulses. 1) Membrane was held at -40mV which was usually found to be zero current level. When depolarizing pulses were applied, the slow inward current $(i_{si})$ was activated. 2) It was shown that there are three categories of the $i_{si}$ activation by the low level of depolarizing clamp pulses. Moderately fast inward current with single component was developed in most cases in the presence of tetrodotoxin(TTX). But sometimes there was two separate components of $i_{si}$ activation in the peak level and the time course. Thirdly the only slow component of $i_{si}$ was found in rare cases. 3) The activation of $(i_{si,2})$ was dependent upon membrane potential. The $i_{si}$ shows two separate peaks during clamp depolarizations and higher clamp pulses lead to fusion of the peaks. 4) The $i_{si,2}$ activation showed that it decreased with repetitive clamp pulses and it was more evident in higher frequencies(2Hz)(negative staircase).

• Journal of KIISE:Software and Applications
• /
• v.27 no.2
• /
• pp.193-200
• /
• 2000

The extraction of face regions is required for Head Gesture Interface which is a natural user interface. Recently, many researchers are interested in using color information to detect face regions in image sequences. Two most widely used color models, HSI color model and YIQ color model, were selected for this study. Actually H-component of HSI and I-component of YIQ are used in this research. Given the difference in the color component, this study was aimed to compare the performance of face region detection between the two models. First, we search the optimum range of facial color for each color component, examining the detection accuracy of facial color regions for variant threshold range about facial color. And then, we compare the accuracy of the face box for both color models by using optimal facial color and motion information. As a result, a range of $0^{\circ}{\sim}14^{\circ}$ in the H-component and a range of $-22^{\circ}{\sim}-2^{\circ}$ in the I-component appeared to be the most optimum range for extracting face regions. When the optimal facial color range is used, I-component is better than H-component by about 10% in accuracy to extract face regions. While optimal facial color and motion information are both used, I-component is also better by about 3% in accuracy to extract face regions.

• Journal of applied mathematics & informatics
• /
• v.5 no.1
• /
• pp.41-50
• /
• 1998

There are various notions of partial ordering between life-times of systems; stochastic ordering failure rate ordering and likeli-hood ration ordering. In this paper we show that for series systems with non i.i.d. exponential lifetimes of components standby redundancy at component level is better than that at system level in failure rate or-dering and likelihood ratio ordering. We also demonstrate that for 2-component parallel systems with i.i.d. exponential lifetimes of com-ponents standby system redundancy is better than standby component redundancy in failure rate ordering and likelihood ratio ordering.