• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2003.11a
• /
• pp.243-249
• /
• 2003

With distribution industrial control system, the use of tow cost to achieve a highly reliable and safe system in real time distributed embedded application is proposed. This developed intelligent node is based on two microcontrollers, one for the execution of the application code, also as master controller for ensuring the real time control & the logic operation with PLD and other for communication task and the easy control execution, i.e., I/O digital input, digital output and interrupting. This paper also presents where the case NCS(Networked control system) with LonTalk protocol is applied for the filtration process control system of a small water treatment plant.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.12
• /
• pp.151-159
• /
• 2022

In this paper, we propose the standardization architecture and weapon-sensor simulator for efficient reliability test in combat system. To reduce man-month of reliability test, application with high dependency on other module is selected and apply FORM. The proposed standardization architecture extracts common, variable elements and design patterns, S.O.L.I.D principles were applied. The proposed weapon-sensor simulator implements essential functions by identifying highly dependent element of other modules and the information from equipment can be directly received without processing by using communication middleware. As a result, it can replace actual ship-mounted equipment. In addition, it is possible to reduce the consumption rate of human resources when perform reliability test and modification time can be shorted.

• Journal of Advanced Navigation Technology
• /
• v.18 no.6
• /
• pp.600-608
• /
• 2014

In this paper, CABAC H/W module is developed using co-design method. After entire H.264/AVC encoder was developed with C using reference SW(JM), CABAC H/W IP is developed as a block in H.264/AVC encoder. Context modeller of CABAC is included on the hardware to update the changed value during binary encoding, which enables the efficient usage of memory and the efficient design of I/O stream. Hardware IP is co-operated with the reference software JM of H.264/AVC, and executed on Virtex-4 FX60 FPGA on ML410 board. Functional simulation is done using Modelsim. Compared with existing H/W module of CABAC with register-level design, the development time is reduced greatly and software engineer can design H/W module more easily. As a result, the used amount of slice in CABAC is less than 1/3 of that of CAVLC module. The proposed co-design method is useful to provide hardware accelerator in need of speed-up of high efficient video encoder in embedded system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.9
• /
• pp.436-443
• /
• 2017

Recently, the development of new energy technologies has become a hot topic due to problems,such as global warming. Unlike renewable energy technologies, such as solar energy generation, solar power, and wind power, which are optimized to achieve medium or above output power, the output power of energy harvesting technology is very small and has not received much attention. On the other hand, as the mobile industry has been revitalized recently, the utility of energy harvesting technology has been reevaluated. In addition, the technology of tracking the maximum power point has been actively researched. This paper proposes a new MPPT(Maximum Power Point Tracking) control method for a TEM(thermoelectric module) for load resistance. The V-I curve characteristics and internal resistance of TEM were analyzed and the conventional MPPT control methods were compared. The P&O(Perturbation and Observation) control method is more accurate, but it is less economical than the CV (Constant Voltage)control method because it usestwo sensors to measure the voltage and current source. The CV control method is superior to the P&O control method in economic aspects because it uses only one voltage sensor but the MPP is not matched precisely. In this paper, a method wasdesigned to track the MPP of TEM combining the advantages of the two control method. The proposed MPPT control method wasverified by PSIM simulation and H/W implementation.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.11
• /
• pp.836-840
• /
• 2009

Many researchers have studied flash memory in order to replace hard disk storages. Many FTL algorithms have been proposed to overcome physical constraints of flash memory such as erase-before-write, wear leveling, and poor write performance. Therefore, these constraints should be considered for testing FTL algorithms and the performance evaluation of flash memory. As doing the experiments, we suffer from several problems with costs and settings in experimental configuration. When we, for example, replay the traces of Oracle to evaluate the I/O performance with flash memory, it is hard to extract exact traces of I/O operations in Oracle. Since there are only write operations in the log, it is impossible to gather read operations. In MySQL and SQLite, we can gather the read operations by changing I/O functions in the source codes. But it is not easy to search for the exact points about I/O and even if we can find out the points, we might get wrong results depending on how we modify source codes to get I/O traces. The FlaSim proposed in this paper removes the difficulties when we evaluate the performance of FTL algorithms and flash memory. Our Linux drivers emulate the flash memory as a hard disk. And we can easily obtain the usage statistics of flash memory such as the number of write, read, and erase operations. The FlaSim can be gracefully extended to support the additional modules implemented by novel algorithms and ideas. In this paper, we describe the structure of FTL emulator, development tools and operating methods. We expect this emulator to be helpful for many experiments and research with flash memory.

• Science of Emotion and Sensibility
• /
• v.14 no.4
• /
• pp.627-636
• /
• 2011

The purpose of this study is to develop the multi-modal interaction system. This system provides realistic and an immersive experience through multi-modal interaction. The system recognizes user behavior, intention, and attention, which overcomes the limitations of uni-modal interaction. The multi-modal interaction system is based upon gesture interaction methods, intuitive gesture interaction and attention evaluation technology. The gesture interaction methods were based on the sensors that were selected to analyze the accuracy of the 3-D gesture recognition technology using meta-analysis. The elements of intuitive gesture interaction were reflected through the results of experiments. The attention evaluation technology was developed by the physiological signal analysis. This system is divided into 3 modules; a motion cognitive system, an eye gaze detecting system, and a bio-reaction sensing system. The first module is the motion cognitive system which uses the accelerator sensor and flexible sensors to recognize hand and finger movements of the user. The second module is an eye gaze detecting system that detects pupil movements and reactions. The final module consists of a bio-reaction sensing system or attention evaluating system which tracks cardiovascular and skin temperature reactions. This study will be used for the development of realistic digital entertainment technology.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.155-158
• /
• 2001

A 640Gb/s high-speed ATM switching system that is based on the technologies of advanced MCM, 0.25um CMOS and optical WDM interconnection is fabricated for future N-ISDN services. A 40 layer, 160mm$\times$114mm ceramic MCM realizes the basic ATM switch module with 80Gbps throughput. The basic unit ATM switch module with 80Gb/s throughput. The basic unit ATM switch MCM consists of in 8 chip advanced 0.25um CMOS VLSI and 32 chip I/O Bipolar VLSIs. The MCM employs an 40 layer, very thin layer ceramic MCM and a uniquely structured closed loop type liquid colling system is adopted to cope with the MCM's high-power dissipation of 230w. The MCM is Mounted on a 32cm$\times$50cm mother board. A three stage ATM switch is realized by optical WDM interconnection between the high-performance MCM.

• The KIPS Transactions:PartC
• /
• v.10C no.7
• /
• pp.929-936
• /
• 2003

We Propose the Suity Cryptography File System to encrypt or decrypt a plaintext or an encrypted tort by using the dynamic linking mechanism In the Linux kernel. The dynamic linking mechanism gives the flexibility of the kernel without changing the kernel. The Sorority Cryptography File System uses the blowfish algorithm to encrypt or decrypt a data. To overcome the overhead of the key server, I use key generating algorithm which is installed in the same Security Cryptography File System. The Security Cryptography file System is fitted into the Linux system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.12
• /
• pp.2579-2585
• /
• 2009

It is an important problem without system breaking. Like this, to make a computer system operate normally, various commercial fault tolerant techniques are used. Almost commercial products of fault tolerant system consume much cost. This paper proposes kernel hardening technique that are reducing panic using DLM modue in Linux USB driver. I experimented the design technique in Linux O.S. By the experiment, the suggesting technique which includes USB module with DLMis working well.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.806-808
• /
• 2004

The series and parallel connection is essential for increasing power ratings of resistive type for fault current limiters. To increase voltage class, components are connected in series and to increase current level to the nominal value, they are connected in parallel. There are two ways to connect components in series and parallel. First, connected in series and then the module connects to the parallel. Second, connected in parallel and the module connects to the series. We have studied for the two ways. In this paper, we particularly investigated way to connect components in parallel first This way has the advantage of inducing effective simultaneous quench without any other devices, for example, the thing which is inducing magnetic field to the limiting and shunt resistors. And also we studied for the endurance of component which is patterned to the bi-spiral for prospective fault current. It is very important to understand this, because SFCL will use as the only device to decrease burden of circuit breaker. As experimental results, limiting component patterned to bi-spiral endures fault current up to 30kA and it works well, in parallel to series connection,