• Nuclear Engineering and Technology
• /
• 제45권5호
• /
• pp.653-664
• /
• 2013

The design of computer-based instrumentation and control (I&C) systems is determined by the allocation of I&C functions to I&C systems and components. Due to the characteristics of computer-based technology, component failures can negatively affect several I&C functions, so that the reliability proof of the I&C systems requires the accomplishment of I&C system design analyses throughout the I&C life-cycle. On one hand, this paper proposes the restructuring of the sequential IEC 61513 I&C life-cycle according to the V-model, so as to adequately integrate the concept of verification and validation. On the other hand, based on a metamodel for the modeling of I&C systems, this paper introduces a method for the modeling and analysis of the effects with respect to the superposition of failure combinations and event sequences on the I&C system design, i.e. the temporal change of physical structure is analyzed. In the first step, the method is concerned with the modeling of the I&C systems. In the second step, the method considers the analysis of temporal change of physical structure, which integrates the concepts of the diversity and defense-in-depth analysis, fault tree analysis, event tree analysis, and failure mode and effects analysis.

• 상하수도학회지
• /
• 제19권2호
• /
• pp.221-227
• /
• 2005

This study has suggested the base data for decision of maintenance ranking and estimation of maintenance effect in the maintenance project of sewers as based on investigation of the defective rate in the sewer through Infiltration/Inflow(I/I) and CCTV analysis. It also analyzed the correlation between I/I and defective rate of sewer. As the result of this study, (1) Defective items of sewer was found out one item each 12.97m with an average. (2) By regression analysis, I/I has high correlation with defective rate of sewer like that $R^2$ is 0.7806. (3) The first thing in the item with bad influence on the I/I was joint badness and secondary was cross connection.

• 상하수도학회지
• /
• 제28권1호
• /
• pp.33-45
• /
• 2014

In this study, current sewer infiltration/Inflow(I/I) computation and application method was examined about improvement and adequacy relating to the main issues raised by the field for practitioners. The results of review about infiltration calculation method were considered to be in need of improvement at 'standards of minimum sewage calculation'. Furthermore, the results of review about I/I application method were considered to be in need of improvement at 'standards of seasonal infiltration application' and 'the relative decrease in the Annual evaluation standards'. In addition, annual I/I analysis at JC County for the four years(2009~2012) in respect of operation flow and rainfall data was conducted. The result of annual infiltration analysis, compared average daily sewage generated average infiltration rate was found in 21.95 %, infiltration by unit was found in $0.31m^3/day/cm/km$ and $0.12m^3/day/day$, respectively. The result of annual inflow analysis, average rainfall - Inflow equations was found $y=5.499{\times}$($R^2$ 0.793), and the average Inflow quantity by sewer extension was predicted to $0.66m^3/mm-km$.

• 한국멀티미디어학회논문지
• /
• 제24권4호
• /
• pp.558-568
• /
• 2021

The digital image to be accepted as legal evidence, it is important to verify the authentication of the digital image. This study proposes a method of authenticating digital images through three steps of comparing the file structure of digital images taken with iPhone, analyzing the encoding information as well as media logs of the iPhone storing the digital images. For the experiment, digital image samples were acquired from nine iPhones through a camera application built into the iPhone. And the characteristics of file structure and media log were compared between digital images generated on the iPhone and digital images edited through a variety of image editing tools. As a result of examining those registered during the digital image creation process, it was confirmed that differences from the original characteristics occurred in file structure and media logs when manipulating digital images on the iPhone, and digital images take with the iPhone. In this way, it shows that it can prove its forensic authentication in iPhone.

• 상하수도학회지
• /
• 제23권3호
• /
• pp.321-329
• /
• 2009

I/I(Infiltration/Inflow) characteristics should be studied to achieve I/I reduction which is a main object of sewer rehabilitation. However, The scientific and practical studies which are based on actual survey within the country are not thorough going enough. The earlier studies were limited because of a short research period and specific region. Thus, In this study, a formula is deduced by intensive correlation analysis between defective number and I/I volume in sewer pipe. It can be used as preliminary data when the project established for cost-effective pipe rehabilitation. The study shows that the researched region have a faulty point at every 9.3m on average and prove correlation between defective number and I/I volume in sewer pipes. Thus, this study can improve the investigation system and estimate the volume of the pipe rehabilitation, when site investigations for rehabilitation have been conducted.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 추계종합학술대회
• /
• pp.656-659
• /
• 2001

최근 반도체 기술의 발달로 소자의 크기가 줄어들면서 높은 에너지를 갖는 핫 캐리어 전송 해석이 매우 중요하게 되었다. Auger 과정과는 반대인 임팩트이온화현상은 핫 캐리어에 의한 산란에 의하여 전자-정공쌍을 생성하는 과정으로 소자의 전송특성 해석을 위한 시뮬레이션에 정확한 임팩트 이온화모델이 필수적이다. 본 연구에서는 Monte Carlo 시뮬레이터를 이용한 임팩트이온화 모델과 TCAD 그리고 Micro-Tec을 이용한 임팩트이온화 모델을 분석하여 보다 정확한 임팩트이온화 모델을 제시하고자 한다.

• 한국응용과학기술학회지
• /
• 제38권4호
• /
• pp.1156-1164
• /
• 2021

본 연구는 축구화 브랜드의 3i 모델의 효과성을 검증하여 브랜드의 3i 모델 중요성과 시사점을 도출하여 축구화 브랜드 전략의 기본 자료를 제공하고자 했다. 따라서 지난 3년 동안 축구화를 구매한 경험이 있는 대상자를 표본으로 선정했으며, 421부의 자료를 최종분석에 적용했다. 자료처리는 빈도분석, 내적일관성, 확인적 요인분석, 상관분석, 구조방정식 모형 분석을 실시했으며, 모든 분석은 SPSS 및 AMOS(ver. 21.0) 프로그램을 활용했다. 연구결과 첫째, 축구화 브랜드의 3i 모델이 브랜드 신뢰에 유의한 영향을 미치는 것으로 나타났다. 둘째, 브랜드 신뢰는 소비자 구매행동에 유의한 영향을 미치는 것으로 나타났다. 셋째, 축구화 브랜드의 3i 모델은 소비자 구매행동에 유의한 영향을 미치는 것으로 나타났다. 마지막으로, 축구화 브랜드3i 모델과 소비자 구매행동 간의 브랜드 신뢰는 부분적인 매개효과가 있는 것으로 나타났다.

• Journal of Yeungnam Medical Science
• /
• 제12권2호
• /
• pp.366-385
• /
• 1995

항산균 감염증의 예방 및 치료를 위하여는 역학적인 연구가 중요하다. 본 연구에서는 감염증의 분자역학적 연구를 위한 기법중 아직 항산균을 대상으로 pulsed-field gel electrophoresis (PFGE) 분석법을 확립하고자 하였다. PFGE분석에 적절한 제한효소는 DraI, AsnI 및 XbaI 등이었고 각 제한효소마다 최적의 PFGE조건은 서로 달랐다. DraI의 경우는 두단계로 나누어 전기영동을 시행하였다. 제1단계의 initial pulse는 10초 final pulse는 15초였으며 제2단계는 initial pulse는 60초 final pulse는 70초이었다. 전기영동시간은 각 단계마다 각각 14시간씩이었다. XbaI의 경우는 제2단계 없이 initial pulse가 3초 final pulse가 12초였고 전기영동시간은 22시간이었다. AsnI의 경우는 제2단계 없이 initial pulse가 5초 final pulse가 25초였고 전기영동시간은 22시간이었다. 모든 경우에 있어서 전압은 200V로 하였다. 표준균주로는 M. bovis BCG, M. tuberculosis 및 M. fortuitum등을 사용하였는데 PFGE분석상 동일균종내에서 표준균주들 간의 차이는 발견할 수 없었다. 임상에서 분리된 9주의 M. fortuitum 균주를 대상으로 AsnI 제한효소로 PFGE분석을 시행한 결과 2주만을 제외하고는 서로 간의 유전형 분류가 가능하였다. 균주간의 유전적 거리를 결정하기 위하여 cluster analysis를 시행한 결과 M. fortuitum 균주들은 크게 두 집단으로 나뉘었다. 제한효소 AsnI으로 동일 균종의 분류가 안되는 M. fortuitum 균주들은 XbaI 제한효소을 사용한 PFGE분석으로 유전형의 구분이 가능하였다. Cluster analysis를 시행한 결과 크게 두 집단으로 나뉘었던 M. fortuitum 균주들은 보다 복잡한 집단으로 분류되어 XbaI을 사용한 PFGE분석법이 M. fortuitum 균주분류를 위하여는 보다 적절함을 알 수 있었다. Cluster analysis에서 얻은 최대 % dissimilarity 값은 0.74(AsnI) 및 0.75(XbaI)로서 이 값은 arbitrarily primed polymerase chain reaction(AP-PCR)법보다는 높고 restriction fragment length polymorphism(RFLP) 법보다는 낮아 PFGE법이 RFLP를 보완하거나 대치할 수 있는 세균 유전형 분석법임을 알 수 있었다.

• 대한수학회보
• /
• 제48권5호
• /
• pp.1063-1078
• /
• 2011

Let M = {1, 2, ${\ldots}$, n} and let V = {$I{\subseteq}M:1{\in}I$}. Denote M\I by $I^c$ for $I{\in}V$. The goal of this paper is to investigate the solution and the stability using the alternative fixed point of generalized cubic functional equation $ \sum\limits_{I{\in}V}f(\sum\limits_{i{\in}I}a_ix_i-\sum\limits_{i{\in}I^c}a_ix_i)=2{^{n-2}{a_1}}\sum\limits_{i=2}^na_i^2[f(x_1+x_i)+f(x_1-x_i)]+2{^{n-1}{a_1}(a^2_1-\sum\limits_{i=2}^2a^2_i)f(x_1)$ in ${\beta}$-Banach modules on Banach algebras, where $a_1,{\ldots},a_n{\in}\mathbb{Z}{\backslash}\{0\}$ with $a_1{\neq}={\pm}1$ and $a_n=1$.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 추계 학술발표회
• /
• pp.509-514
• /
• 2006

Considering the risk management, there are many examples and various studies for the corporation risk. However, I have never seen the project risk management that applied a construction site for practical approach. Therefore, I have developed a chart (I-Chart) for the project risk management, and also built a model (I-Chart scenario analysis) that I could use. I applied this model to container yard reclaimed land in harbor construction with approaching of geotechnical engineering.