• Nuclear Engineering and Technology
• /
• v.45 no.5
• /
• pp.653-664
• /
• 2013

The design of computer-based instrumentation and control (I&C) systems is determined by the allocation of I&C functions to I&C systems and components. Due to the characteristics of computer-based technology, component failures can negatively affect several I&C functions, so that the reliability proof of the I&C systems requires the accomplishment of I&C system design analyses throughout the I&C life-cycle. On one hand, this paper proposes the restructuring of the sequential IEC 61513 I&C life-cycle according to the V-model, so as to adequately integrate the concept of verification and validation. On the other hand, based on a metamodel for the modeling of I&C systems, this paper introduces a method for the modeling and analysis of the effects with respect to the superposition of failure combinations and event sequences on the I&C system design, i.e. the temporal change of physical structure is analyzed. In the first step, the method is concerned with the modeling of the I&C systems. In the second step, the method considers the analysis of temporal change of physical structure, which integrates the concepts of the diversity and defense-in-depth analysis, fault tree analysis, event tree analysis, and failure mode and effects analysis.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.2
• /
• pp.221-227
• /
• 2005

This study has suggested the base data for decision of maintenance ranking and estimation of maintenance effect in the maintenance project of sewers as based on investigation of the defective rate in the sewer through Infiltration/Inflow(I/I) and CCTV analysis. It also analyzed the correlation between I/I and defective rate of sewer. As the result of this study, (1) Defective items of sewer was found out one item each 12.97m with an average. (2) By regression analysis, I/I has high correlation with defective rate of sewer like that $R^2$ is 0.7806. (3) The first thing in the item with bad influence on the I/I was joint badness and secondary was cross connection.

• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.1
• /
• pp.33-45
• /
• 2014

In this study, current sewer infiltration/Inflow(I/I) computation and application method was examined about improvement and adequacy relating to the main issues raised by the field for practitioners. The results of review about infiltration calculation method were considered to be in need of improvement at 'standards of minimum sewage calculation'. Furthermore, the results of review about I/I application method were considered to be in need of improvement at 'standards of seasonal infiltration application' and 'the relative decrease in the Annual evaluation standards'. In addition, annual I/I analysis at JC County for the four years(2009~2012) in respect of operation flow and rainfall data was conducted. The result of annual infiltration analysis, compared average daily sewage generated average infiltration rate was found in 21.95 %, infiltration by unit was found in $0.31m^3/day/cm/km$ and $0.12m^3/day/day$, respectively. The result of annual inflow analysis, average rainfall - Inflow equations was found $y=5.499{\times}$($R^2$ 0.793), and the average Inflow quantity by sewer extension was predicted to $0.66m^3/mm-km$.

• Journal of Korea Multimedia Society
• /
• v.24 no.4
• /
• pp.558-568
• /
• 2021

The digital image to be accepted as legal evidence, it is important to verify the authentication of the digital image. This study proposes a method of authenticating digital images through three steps of comparing the file structure of digital images taken with iPhone, analyzing the encoding information as well as media logs of the iPhone storing the digital images. For the experiment, digital image samples were acquired from nine iPhones through a camera application built into the iPhone. And the characteristics of file structure and media log were compared between digital images generated on the iPhone and digital images edited through a variety of image editing tools. As a result of examining those registered during the digital image creation process, it was confirmed that differences from the original characteristics occurred in file structure and media logs when manipulating digital images on the iPhone, and digital images take with the iPhone. In this way, it shows that it can prove its forensic authentication in iPhone.

• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.3
• /
• pp.321-329
• /
• 2009

I/I(Infiltration/Inflow) characteristics should be studied to achieve I/I reduction which is a main object of sewer rehabilitation. However, The scientific and practical studies which are based on actual survey within the country are not thorough going enough. The earlier studies were limited because of a short research period and specific region. Thus, In this study, a formula is deduced by intensive correlation analysis between defective number and I/I volume in sewer pipe. It can be used as preliminary data when the project established for cost-effective pipe rehabilitation. The study shows that the researched region have a faulty point at every 9.3m on average and prove correlation between defective number and I/I volume in sewer pipes. Thus, this study can improve the investigation system and estimate the volume of the pipe rehabilitation, when site investigations for rehabilitation have been conducted.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.656-659
• /
• 2001

Recently, as device techniques are advancing and its size become smaller, the hot carriers transport analysis has more important. Impact ionization(I.I.) effect is electron-hole pair generation process by the dispersion of hot carrier in the contrast with Auger process. Complete I.I. model is essential to simulate and analysis the device transport characteristics. In the study, we will try to analysis I.I. models using Monte Carlo simulator, TCAD and Micro-Tec and present more accurate I.I. model.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.4
• /
• pp.1156-1164
• /
• 2021

This study sought to provide basic data on the soccer shoe brand strategy method by verifying the effectiveness of the soccer shoe brand 3i model to derive the importance and implications of the brand 3i model. Therefore, the sample was selected for those who have purchased soccer shoes for the past three years, and 421 copies of the data were applied to the final analysis. Data processing performed frequency analysis, internal consistency, confirmatory factor analysis, correlation analysis, and structural equation model analysis, all of which utilized SPSS (ver. 21.0) and AMOS (ver. 20.0) programs. The conclusions of this study are as follows. First, soccer shoe brand 3i model had a significant influence on brand trust. Second, brand trust had a significant influence on consumer purchasing behavior. Third, soccer shoe brand 3i model had a significant influence on consumer purchasing behavior. Lastly, brand trust between soccer shoe brand 3i model and consumer purchasing behavior showed partial mediated effect.

• Journal of Yeungnam Medical Science
• /
• v.12 no.2
• /
• pp.366-385
• /
• 1995

Epidemiological studies are important in both the prevention and treatment of mycobacterial infections. This study was initiated to establish the pulsed-field gel electrophoresis (PFGE) method, which are not yet extensively studied. The most apprpriate restriction endonucleases included DraI, AsnI, and XbaI. The optimal PFGE condition was different according to the enzymes used. Two stage PFGE was performed, in case of DraI first stage was performed with 10 seconds of initial pulse and 15 seconds of final pulse, while the second stage was performed with 60 seconds of initial pulse and 70 seconds of final pulse. The electrophoresis time for DraI-PFGE was 14 hours for each stage. Electrophoresis was performed for 22 hours, in case of XbaI, with 3 seconds of initial pulse and 12 seconds of final pulse. Electrophoresis was performed for 22 hours, in case of AsnI, with 5 seconds of initial pulse and 25 seconds of final pulse. In all cases the voltage of the electrophoresis was maintained constantly at 200 voltage. Standard mycobacterial strains, which included Mycobacterium bovis BCG, M. tuberculosis, and M. fortuitum, could not be differentiated by PFGE analysis. PFGE analysis was performed to differentiate 9 clinically isolated M. fortuitum strains using AsnI. All M. fortuitum strains showed different genotypes except 2 strains. Cluster analysis divided M. fortuitum strains into 2 large groups. PFGE analysis was performed to further differentiate M. fortuitum isolates using XbaI. The undifferentiated 2 M. fortuitum strains showed different PFGE patterns with Xba I. Cluster analysis of the XbaI-PFGE patterns showed more complex grouping than AsnI-PFGE patterns, which showed that XbaI-PFGE analysis was better than AsnI-PFGE in M. fortuitum genotyping. The top dissimilarity values of AsnI-PFGE and XbaI-PFGE were 0.74 and 0.75, respectively. This value was higher than that of arbitrarily primed polymerase chain reaction (AP-PCR) analysis and lower than that of restriction fragment length polymorphism (RFLP) analysis. This suggested that PFGE can be used as a supportive or alternative genotyping method to RFLP analysis.

• Bulletin of the Korean Mathematical Society
• /
• v.48 no.5
• /
• pp.1063-1078
• /
• 2011

Let M = {1, 2, ${\ldots}$, n} and let V = {$I{\subseteq}M:1{\in}I$}. Denote M\I by $I^c$ for $I{\in}V$. The goal of this paper is to investigate the solution and the stability using the alternative fixed point of generalized cubic functional equation $ \sum\limits_{I{\in}V}f(\sum\limits_{i{\in}I}a_ix_i-\sum\limits_{i{\in}I^c}a_ix_i)=2{^{n-2}{a_1}}\sum\limits_{i=2}^na_i^2[f(x_1+x_i)+f(x_1-x_i)]+2{^{n-1}{a_1}(a^2_1-\sum\limits_{i=2}^2a^2_i)f(x_1)$ in ${\beta}$-Banach modules on Banach algebras, where $a_1,{\ldots},a_n{\in}\mathbb{Z}{\backslash}\{0\}$ with $a_1{\neq}={\pm}1$ and $a_n=1$.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.10a
• /
• pp.509-514
• /
• 2006

Considering the risk management, there are many examples and various studies for the corporation risk. However, I have never seen the project risk management that applied a construction site for practical approach. Therefore, I have developed a chart (I-Chart) for the project risk management, and also built a model (I-Chart scenario analysis) that I could use. I applied this model to container yard reclaimed land in harbor construction with approaching of geotechnical engineering.