• 한국광물학회지
• /
• 제12권1호
• /
• pp.43-53
• /
• 1999

The medical mineral menas a single mineral or a complex of minerals. It is natural material. using the medical action of he major or the minor elements, and traditional medicine stuff which has been used since long time ago. Jusa, cinnabar as the mineral name, is the product of the hydrothermal process. It is used to relax the body and cure high blood pressure, apoplexy and cardiopathy. Jusais the major component of "An shin hwan" and "Woo hwang chung shim hwan" nowadays because it has such an excellent calm effect. In addition, it is used to cure cancers such as esophageal cancer and gastric cancer. Jusa composed of mercuric sulfide causes mercury poisoning such as Minamata disease. It is dealt with mineralogical property and chemical composition medical stuff in Korea and China, as well asmercury poisoning and medical action of Jusa in this study. In order to predct accumulation of the interior of the body of the major and minor elements in Jusa, leaching experiment of Jusa by artificial gastric juice was done as well as thermodynamic reaction modelling to know concentration of each species of body fluid. The minor elements of 24 species such as As, Pb, Cd, a and Fe by leaching reaction of Jusa and artificial gastric juice were leached. We can know the fact that as is less than 1 ppm, Hg is less than 25 ppm and Cd and m are not detected. In addition, mercury exists as species of Hg2+, HgCl+, HgCl2, HgCl3-, HgCl42-, HgClOH, HgS(H2S)2, Hg(HS)3-, HgS22-, HgOH and Hg(OH)2 by reaction modelling between Jusa and artificial gastric juice. The concentration of sulfide complexes is 24.2 ppm and that of others is less than 10 ppm. According to increasing pH, the concentration of HgS(H2S)2, Hg(HS)3+, HgS22- and Hg(OH)2 increases, whereas the concentration of HgCl+, HgCl2, HgCl3- and HgCl42- decreases. Therefore, Jusa is very useful for the development of new medicine because it is possible to predict formation of the body species and species accumulation on mercury known as a toxic element and concentration changes of toxicity and efficiency.city and efficiency.

• 자원리싸이클링
• /
• 제10권3호
• /
• pp.60-65
• /
• 2001

폴리염화비닐(PVC)을 0~2 M NaOH수용액중에서 반응온도 $200~250^{\circ}C$, 반응시간 0~5시간으로 수열처리한 경우 PVC의 탈염화수소속도에 관해서 조사했다 수중에서는 PVC분말의 탈염화수소반응은 외견상 0차반응으로 진행되며, 이때의 활성화에너지는 약 46 kcal/mol이다. NaOH중에서의 탈염화수소에서는 NaOH농도가 0.5 M까지는 탈염화수소반응은 촉진되어지며 탈염화수소반응은 외 견상 1차반응으로 진행되었다. 또한 0.5M이상에서는 반응속도는 거의 일정했다. 0.1 M 및 0.5M NaOH수용액중에서의 탈염화수소반응의 활성화에너지는 약 46 kcal/mol로서 수중의 경우와 거의 같았다.

• Bulletin of the Korean Chemical Society
• /
• 제25권5호
• /
• pp.681-686
• /
• 2004

Ti-ZSM-5 prepared by secondary synthesis, from the reaction of H-ZSM-5 with vapor phase $TiCl_4$, was characterized with several physicochemical techniques including FT-IR and UV/VIS-DRS. It was found that zeolite structure, surface area and pore volume did not change, and the framework aluminum could not be replaced by titanium atom during the secondary synthesis of Ti-ZSM-5. The incorporation of titanium into the framework might be due to reaction of $TiCl_4$with the silanol groups associated with defects or surface sites. The formation of extra-framework titanium could not be avoided, unless the samples were further treated by water vapor at 550 $^{\circ}C$ or higher temperature. High temperature steam treatment of Ti-ZSM-5 prepared by chemical vapor deposition with $TiCl_4$was efficient to prevent the formation of non-framework titanium species. Ti-ZSM-5 zeolites prepared in this work contained only framework titanium species and exhibited improved catalytic property close to TS-1 prepared by hydrothermal synthesis.

• 한국결정성장학회지
• /
• 제26권4호
• /
• pp.150-154
• /
• 2016

$K_2Ti_6O_{13}$ 휘스커를 합성하는 방법은 고상법, 수열합성법, 소성법, 융제법, 서냉법, 용융법, KDC법, 졸-겔법 등이 있다. 융제법을 이용하여 $K_2Ti_6O_{13}$을 합성하는 연구를 진행하였다. 칼륨 전구체의 종류와 반응온도와 시간을 조절하여 합성 된 $K_2Ti_6O_{13}$의 입자크기와 분포를 제어하였고, 합성된 $K_2Ti_6O_{13}$의 평균입자 크기는 $500nm{\sim}2{\mu}m$였다. KOH와 $TiO_2$의 비율, pH(KOH 첨가량), 반응온도와 반응시간 등의 공정변수에 대해 연구를 진행하였다. 합성된 $K_2Ti_6O_{13}$은 X-선 회절분석기와 전계방사 주사전자현미경을 이용하여 특성평가를 실시하였다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.264-265
• /
• 2014

This Paper reports the photocatalytic activity of $g-C_3N_4/NaTaO_3$ hybrid composite photocatalysts synthesized by ball-mill method. The $g-C_3N_4$ and $NaTaO_3$ were individually prepared by Solid state reaction and microwave hydrothermal process, respectively. The $g-C_3N_4/NaTaO_3$ composite showed the enhanced photocatalytic activity for degradation of rhodamine B dye (Rh. B) under simulated solar light irradiation. The results revealed that the band-gap energy absorption edge of hybrid composite samples was shifted to a longer wavelength as compared to $NaTaO_3$ and the 50 wt% $g-C_3N_4/NaTaO_3$ hybrid composite exhibited the highest percentage (99.6 %) of degradation of Rh. B and the highest reaction rate constant ($0.013min^{-1}$) in 4 h which could be attributed to the enhanced absorption of the hybrid composite photocatalyst in the UV-Vis region. Hence, these results suggest that the $g-C_3N_4/NaTaO_3$ hybrid composite exhibits enhanced photocatalytic activity for the degradation of rhodamine B under simulated solar light irradiation in comparison to the commercial $NaTaO_3$.

• Bulletin of the Korean Chemical Society
• /
• 제34권11호
• /
• pp.3387-3390
• /
• 2013

Catalytic gasification of mandarin waste residue was carried out using direct and indirect catalyst-contact methods for the first time. In the indirect method, non-catalytic reaction in a reactor was followed by catalytic upgrading of vapor product in another reactor. Two different catalysts, $Ni/{\gamma}-Al_2O_3$ and $Ni/CeO_2-ZrO_2$, were employed. $CeO_2-ZrO_2$ support was prepared using hydrothermal synthesis in supercritical water. The catalysts were characterized by $H_2$-temperature programmed reduction and Brunauer-Emmett-Teller analyses. Under the condition of equivalent ratio (ER) = 0, the indirect catalyst-contact method led to a higher gas yield than the direct method. Under ER = 0.2, the yield of biogas obtained over $Ni/CeO_2-ZrO_2$ was higher than that obtained over $Ni/{\gamma}-Al_2O_3$. Also, the coke formation of $Ni/CeO_2-ZrO_2$ was lower than that of $Ni/{\gamma}-Al_2O_3$. Such results were attributed to the higher reducibility and better lattice oxygen mobility of $Ni/CeO_2-ZrO_2$, which were advantageous for partial oxidation reaction.

• 한국분말재료학회지
• /
• 제15권2호
• /
• pp.125-135
• /
• 2008

[ $TiO_2$ ] nanotubes for photocatalytic application have been synthesized by hydrothermal method. $TiO_2$ nanotubes are formed by washing process after reaction in alkalic solution. Nanotubes with different morphology have been fabricated by changing NaOH concentration, temperature and time. $TiO_2$ nanoparticles were treated inside NaOH aqueous solution in a Teflon vessel at $110^{\circ}C$ for 20 h, after which they were washed with HCl aqueous solution and deionized water. Nanotube with the most perfect morphology was formed from 0.1 N HCl washing treatment. $TiO_2$ nanotube was also obtained when the precursor was washed with other washing solutions such as $NH_4OH$, NaCl, $K_2SO_4$, and $Na_2SO_3$. Therefore, it was suggested that $Na^+$ ion combined inside the precursor compound slowly comes out from the structure, leaving nanosheet morphology of $TiO_2$ compounds, which in turn become the nanotube in the presence of hydroxyl ion. To stabilize the sheet morphology, the different type of washing treatment solution might be considered such as amine class compounds.

• 공업화학
• /
• 제30권1호
• /
• pp.49-53
• /
• 2019

간단한 볼-밀 방법에 의한 one-pot 합성법을 통해 수화된 이산화망간 나노와이어가 합성되었다. 이렇게 준비된 이산화망간 나노와이어는 주사 전자 현미경(SEM), 투과 전자 현미경(TEM), X-선 회절(XRD) 및 Brunauer-Emmett-Teller (BET)로 특성화되었고, 적당한 크기(4-5 nm)와 형태에서 좋은 촉매적 활성을 보였다. 기질 Furfuryl 알코올을 선택하여 톨루엔 용매를 사용하고 산소 1기압 및 온도 $100^{\circ}C$에서 반응시켰다. 이산화망간 나노와이어 촉매는 뛰어난 선택성과 전환성을 보이며 월등한 furfural 수율을 나타내었다. 또한 재사용 촉매 성능 테스트에서, 5번 이상 재실험 중 촉매 활성의 손실이 거의 없어 좋은 기계적 강도를 보여주었다.

• 한국재료학회지
• /
• 제31권6호
• /
• pp.345-352
• /
• 2021

In this study, Ni nanoparticle supported by graphene oxide (GO) (Ni-GO) is successfully synthesized through hydrothermal synthesis and calcination, and Cr(VI) is extracted from aqueous solution. The morphology and structure of Ni-GO composites are characterized by scanning electron microscopy (SEM), trans mission electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). High-resolution transmission electron microscopy (HRTEM) and XRD confirms the high dispersion of Ni nanoparticle after support by GO. Loading Ni on GO can obviously enhance the stability of Ni-GO composites. It can be calculated from TGA that the mass percentage of Ni is about 60.67 %. The effects of initial pH and reaction time on Cr(VI) removal ability of Ni-GO are investigated. The results indicate that the removal efficiency of Cr(VI) is greater than that of bared GO. Ni-GO shows fast removal capacity for Cr(VI) (<25 min) with high removal efficiency. Dynamic experiments show that the removal process conforms to the quasi-second order model of adsorption, which indicates that the rate control step of the removal process is chemical adsorption. The removal capacity increases with the increase of temperature, indicating that the reaction of Cr(VI) on Ni-GO composites is endothermic and spontaneous. Combined with tests and characterization, the mechanism of Cr(VI) removal by rapidly adsorption on the surface of Ni-GO and reduction by Ni nanoparticle is investigated. The above results show that Ni-GO can be used as a potential remediation agent for Cr(VI)-contaminated groundwater.

• 대한토목학회논문집
• /
• 제29권1B호
• /
• pp.91-96
• /
• 2009

LDH(Layered double hydroxide) 물질을 제조하고 이를 이용하여 비소를 흡착시키는 실험을 수행하였다. TEM을 이용하여 제조한 LDH 물질의 형상을 살펴본 결과 열처리를 거친 시료는 나노크기의 결정화된 구조를 가지고 있고 열처리를 거치지 않은 시료는 아직 결정화가 완전히 이루어지지 않았으며 크기도 마이크로 범위에서 나타났다. X선 회절분석 결과를 보면 이 같은 결과가 뚜렷이 나타났으며, 열처리를 거친 경우는 뚜렷한 결정화를 보이고 있었다. $N_2$ 흡착 및 탈착 결과를 통해 LDH가 mesoporous한 공극 형태를 가지고 있다는 것을 알 수 있었다. 비표면적은 열처리를 거친 시료가 열처리를 거치지 않은 시료보다 2배 이상 크게 나타났다. 흡착 등온 실험 결과에서도 두 시료는 비슷한 흡착량을 보이며 기존 철산화 물에 못지않은 흡착능을 나타내고 있다. 금번에 합성한 Mg Fe-LDH 물질을 이용하여 토양 및 지하수의 비소 제거 공정에 적용할 수 있음을 확인하였다.