• 제목/요약/키워드: Hydration energy

검색결과 182건 처리시간 0.025초

작물 보호제로서 살균제와 살충제의 활성 성분에 대한 물리-화학 파라미터의 범위 (The Range of Physicochemical Parameters for the Active Ingredients of Fungicides and Insecticides as Crop Protection Agents)

  • 송선섭;성낙도
    • Applied Biological Chemistry
    • /
    • 제46권4호
    • /
    • pp.280-284
    • /
    • 2003
  • 농업용 살균제와 살충제로서의 활용성 진단과 예측평가 자료로 사용하기 위하여 상용화 된 살균제 133품목과 살충제 152품목의 활성 성분들에 대하여 소수성(LogP), 쌍극자능율(DM), HOMO 및 LUMO 에너지, molar refractivity(MR), polarizability(Pol), van der Waals 분자 표면적 및 부피(Vol), 분자량 및 수화 에너지(hydralion energy) 등, 10 가지의 다양한 물리-화학 파라미터들을 계산하였다. 그리고 살균제와 sterol 생합성 저해제 (DMI: demethylation inhibitor) 및 살충제와 acetylcholine esterase 저해제(AChE)이 가지는 특정한 물리-화학 파라미터들의 범위 값을 설정하였다. 그 결과에 기초하여 다양한 화합물들이 작물 보호제로서 살균제와 살충제로의 활용 가능성이 예측될 것으로 판단되었다.

CO2고정화한 제강슬래그와 발전소 바닥재를 활용한 저강도 고유동 채움재의 특성 (Characterization of Controlled Low Strength Materials Utilizing CO2-fixation Steel Slag and Power Plant Bottom Ash)

  • 조용광;김춘식;남성영;조성현;이형우;안지환
    • 에너지공학
    • /
    • 제27권2호
    • /
    • pp.55-60
    • /
    • 2018
  • 폐자원으로 분류되는 화력발전소의 석탄재와 제강슬래그(KR슬래그)를 주 재료로 활용하여 저강도 고유동채움재를 제조하였다. 산업부산물의 활용방안을 확대하고 중금속 용출 억제 등의 환경적 안정성을 확보하기 위해 화력발전소 바닥재(bottom ash)와 KR슬래그는 7:3으로 혼합하여 탄산화반응($CO_2$고정화)을 실시하였다. 연구결과 석탄바닥재의 기공이 많아 $CO_2$고정화 물질 함량이 증가할수록 물비율이 증가하였다. 배합 중 분체함량이 증가할수록 블리딩율이 저하되는 것을 확인하였다. 1종 보통 포틀랜드 시멘트(OPC)함량이 감소할수록 수화반응의 활성화가 저하되어 압축강도는 감소하였다. 하지만 배합 조성을 적절히 조절할 경우 저강도 고유동 채움재가 요구되는 2.0MPa의 압축강도는 충족시킬 수 있는 결과를 확보하였다.

감마선 조사가 현미의 수화속도 및 호화양상에 미치는 영향 (Effect of Gamma Irradiation on Water Uptake Rate and Gelatinization of Brown Rice)

  • 이유석;서정식;이주운;변명우
    • 한국식품과학회지
    • /
    • 제36권6호
    • /
    • pp.900-904
    • /
    • 2004
  • 현미의 수화속도를 개선하여 조리적성을 향상시키기 위해 0, 1, 3, 5kGy로 감마선을 조사한 후 수분흡수속도, 이화학적 특성 및 호화특성을 조사하였다. 현미의 수분흡수량은 수침온도 ($20-50^{\circ}C$)와 감마선 조사선량이 증가할 수록 증가하는 경향을 나타내었다. 수침온도 $50^{\circ}C$ 이상에서는 0 kGy와 1 kGy의 수분 흡수량은 큰 차이가 없었지만 5 kGy 조사구는 수침액 중에 가용성성분의 용출로 인해 오히려 수분흡수량이 감소하는 경향을 나타내었다. Amylograph에 의해 측정된 peak viscosity, setback, breakdown 및 consistency는 감마선 조사선량이 증가하면서 유의적으로 감소하는 경향을 보였다. Thermogravimetric analyzer에 의한 열중량분석 결과는 감마선 조사에 의해 고온 ($300^{\circ}C$ 이상)에서의 수분증발이 촉진되는 것으로 조사되었다.

Characteristics of Hydration and Correlation on Cement-Based Thermal Insulation Material

  • Kim, Tae Yeon;Jo, Ki Sic;Chu, Yong Sik
    • 한국세라믹학회지
    • /
    • 제56권5호
    • /
    • pp.489-496
    • /
    • 2019
  • Cement-based thermal insulation material was manufactured using OPC, lime, anhydrite, and CSA cement in this study. The morphology and physical properties of the material were analyzed using XRD. All samples had ettringite, Ca(OH)2, and CaCO3 crystals. The XRD peak intensity of the ettringite and Ca(OH)2 slightly increased with an increase in curing time from 3 to 7 days. The compressive strength values at 28 days of specimens 1-8 were in the range of 0.25-0.32 MPa, and the compressive strength values of specimens 3-8 were > 0.3 MPa. The coefficients of correlation between compressive strength and apparent gravity at 7 days and those between compressive strength and ettringite/Ca(OH)2 XRD peak intensity at 28 days were above 0.8. That is, the compressive strength exhibited an influence on apparent gravity at 7 days and on hydrate at 28 days. The thermal conductivity of all specimens was 0.041-0.045 W/mK, and the highest value of thermal conductivity was shown by specimen 5. The coefficient of correlation between apparent gravity and thermal conductivity was 0.84. It was concluded that control of raw materials and hydrates must be considered for manufacturing of insulation materials. The cement-based thermal insulation material in this study could be used in construction fields.

Bonding of nano-modified concrete with steel under freezing temperatures using different protection methods

  • Yasien, A.M.;Bassuoni, M.T.
    • Computers and Concrete
    • /
    • 제26권3호
    • /
    • pp.257-273
    • /
    • 2020
  • Concrete bond strength with steel re-bars depends on multiple factors including concrete-steel interface and mechanical properties of concrete. However, the hydration development of cementitious paste, and in turn the mechanical properties of concrete, are negatively affected by cold weather. This study aimed at exploring the concrete-steel bonding behavior in concrete cast and cured under freezing temperatures. Three concrete mixtures were cast and cured at -10 and -20℃. The mixtures were protected using conventional insulation blankets and a hybrid system consisting of insulation blankets and phase change materials. The mixtures comprised General Use cement, fly ash (20%), nano-silica (6%) and calcium nitrate-nitrite as a cold weather admixture system. The mixtures were tested in terms of internal temperature, compressive, tensile strengths, and modulus of elasticity. In addition, the bond strength between concrete and steel re-bars were evaluated by a pull-out test, while the quality of the interface between concrete and steel was assessed by thermal and microscopy studies. In addition, the internal heat evolution and force-slip relationship were modeled based on energy conservation and stress-strain relationships, respectively using three-dimensional (3D) finite-element software. The results showed the reliability of the proposed models to accurately predict concrete heat evolution as well as bond strength relative to experimental data. The hybrid protection system and nano-modified concrete mixtures produced good quality concrete-steel interface with adequate bond strength, without need for heating operations before casting and during curing under freezing temperatures down to -20℃.

[P(AA-co-PEGMM)] 공중합체 필름의 합성 및 물리화학적 특성 (Synthesis of [P(AA-co-PEGMM)] Copolymer Films and its Physicochemical Characteristics)

  • 김준식;박정숙;한건
    • Journal of Pharmaceutical Investigation
    • /
    • 제31권3호
    • /
    • pp.173-180
    • /
    • 2001
  • The physicochemical characteristics such as glass transition temperature (Tg), surface energy, swelling and FT-IR of [P(AA-co-PEGMM)], a copolymer of acrylic acid (AA) and polyethyleneglycol monoethylether mono methacrylate (PEGMM), were evaluated. The Tg of [P(AA-co-PEGMM)] decreased with increasing PEGMM content. [P(AA-co-PEGMM)] with 18 mole% PEGMM had the Tg of about $40^{\circ}C$, the similar physiological temperature of human. Moreover, [P(AA-co-PEGMM)] with lower PEGMM content had higher hydration and expected lower mucoadhesive strengths. To predict the mucoadhesiveness of [P(AA-co-PEGMM)] films, the contact angle of films were measured. With the increasing content of PEGMM of films, the contact angle was increased and the higher mucoadhesive forces was expected. ATR-FTIR studies revealed that the addition of the PEG moiety in AA increased the potential of hydrogen bonding for [P(AA-co-PEGMM)] as compared to cross linking polyacrylic acid (cr-PAA) because the oxygen in the repeat unit of PEG contributed in the formation of hydrogen bonding in the presence of mucin solution.

  • PDF

SUS 304 마이크로 와이어 직선화 처리에 관한 연구 (Study on Micro Wire Straightening Process in SUS 304)

  • 신홍규;김남수;김웅겸;홍남표;김병희;김헌영
    • 산업기술연구
    • /
    • 제24권A호
    • /
    • pp.17-22
    • /
    • 2004
  • In the study, we have developed a straightening system for 304 micro wires that are normally used in the medical and semi-conductor fields. To apply heat to the micro wires, we introduced the direct wire heating method which generates the thermal energy by the electrical resistance of the wire itself. To avoid the deterioration of the wire surface by the environment, such as the oxidation or the hydration, the $N_2$ gas was filled in the glass pipe in which the straightening process was being performed. A precision tension meter was also attached to control the tension of the wire during the heating and straightening process. In order to control the straightening process, several experimental investigations with varying the tension, the feeding velocity and the temperature (current) was carried out. As a result of experiments, we obtained the optimal processing conditions satisfying the straightness requirement of the micro wires.

  • PDF

Separation of Lithium Isotopes by Tetraazamacrocycles Tethered to Merrifield Peptide Resin

  • Jeon, Youn-Seok;Jang, Nak-Han;Kang, Byung-Moo;Jeon, Young-Shin;Kim, Chang-Suk;Choi, Ki-Young;Ryu, Hai-Il
    • Bulletin of the Korean Chemical Society
    • /
    • 제28권3호
    • /
    • pp.451-456
    • /
    • 2007
  • Tetraazamacrocyclic ion exchangers tethered to Merrifield peptide resin (DTDM, TTTM) were prepared and the ion exchange capacity of these was characterized. The isotope separation of lithium was determined using breakthrough method of column chromatography. The isotope separation coefficient was strongly dependent on the ligand structure by Glueckauf's theory. We found that the isotope separation coefficients were increased as the values of distribution coefficients were increased. In this experiment the lighter isotope, 6Li was enriched in the resin phase, while the heavier isotope, 7Li in the solution phase. The ion radius of lighter isotope, 6Li was shorter than the heavier isotope, 7Li. The hydration number of lithium ion with the same charge became small as mass number was decreased. Because 6Li was more strongly retained in the resin than 7Li, the isotopes of lithium were separated with subsequent enrichment in the resin phase.

Research on One Dimensional Dynamic Model in Water Transportation of PEM Fuel Cell

  • Bakhtiar, Agung;You, Jin-Kwang;Park, Jong-Bum;Hong, Boo-Pyo;Choi, Kwang-Hwan
    • 한국태양에너지학회:학술대회논문집
    • /
    • 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
    • /
    • pp.382-387
    • /
    • 2012
  • Water balance has a significant impact on the overall fuel cell system performance. Proper water management should provide an adequate membrane hydration and avoidance of water flooding in the catalyst layer and gas diffusion layer. Considering the important of advanced water management in PEM fuel cell, this study proposes a simple one dimensional water transportation model of PEM fuel cell for use in a dynamic condition. The model has been created by assumption that the output is the water liquid saturation difference. The liquid saturation change is the total difference between the additional water and the removal water on the system. The water addition is obtained from fuel cell reaction and the electro osmotic drag. The water removal is obtained from capillary transport and evaporation process. The result shows that the capillary water transport of low temperature fuel cell is high because the evaporation rate is low.

  • PDF

VH분리타설 공법의 초고강도 콘크리트 적용성 평가 (Evaluation of Suitable Application of ultra high-strength Concrete to V.H Separated Placement)

  • 김학영;기전도;박현;임병춘;이영도;정상진
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2009년도 추계 학술논문 발표대회
    • /
    • pp.23-26
    • /
    • 2009
  • Despite vigorous studies on ultra high-strength concrete in Korea, it still faces many challenges in application to on-site construction methods. This study intends to evaluate the applicability of the VH separated-pouring method which is currently used and was designed to pour ultra high-strength concrete with a design strength of 60, 100N/㎟ separately to girder and beam. When it comes to VH separated-pouring, there is a difference in the required design strength between a girder and a beam, which tends to be larger for ultra high-strength concrete. The tensile strength and cold joint at the joint end have not been commonly evaluated and thus the inevitably of its use is dependent on a structural analysis of the structural stress of reinforcement. In the study, potential problems with respect to the building material which might occur during the pouring of ultra high-strength concrete was evaluated and issues on joint surface performance, the hydration energy contained in the members, and the effects of contraction in concrete were considered as the key elements for study.

  • PDF