• 한국항공우주학회지
• /
• 제42권5호
• /
• pp.383-389
• /
• 2014

하이브리드 로켓 연소실 내부 유동장에 대한 수치계산 결과에 POD기법을 적용하였다. 특히, 다이어프램 설치에 따른 유동모드 변화를 분석하여, 연소특성에 미치는 영향을 해석하였다. 또한, 다이어프램이 있는 연소실에서 표면 분출유동의 유무에 따른 POD를 적용하여 분출유동이 연소실 내부 유동특성에 미치는 영향을 판단하였다. 10개의 모드를 사용하여 기본형상에 대한 POD 결과를 살펴보면 주 유동을 나타내는 모드 1과 벽면 근처의 작은 크기 유동인 2-9 모드 사이의 구분이 분명하게 나타났다. 다이어프램을 설치한 형상의 POD 결과, 모드 2부터 5의 에너지가 증가하였는데 이것은 다이어프램 주변 순환영역에서 생성되는 유동 때문인 것으로 보인다. 한편, 다이어프램 주위 영역의 유동특성을 보여주는 모드 2-5와 후류 벽면의 유동특성을 보여주는 모드 6-9의 에너지 분포가 분출유동 유무에 관계없이 비슷한 특성을 나타냈다. 따라서 연소율이 다이어프램 근처에만 국부적으로 증가하는 이유는 다이어프램 후류에 형성되는 비교적 큰 크기의 유동모드 2-5의 에너지가 증가되었기 때문인 것으로 분석된다.

• 조명전기설비학회논문지
• /
• 제21권8호
• /
• pp.96-101
• /
• 2007

가스방전관(GDT)은 내부 정전용량이 작아서 통신용 서지보호기로 널리 사용되고 있는 소자이다. 하지만 가스방 전관의 동작개시를 위해서는 방전이 개시될 수 있는 충분한 전압과 시간이 필요하며, 이 동작개시전압은 피보호 회로가 서지에 민감한 장비일 경우 손상을 줄 수 있을 만큼 크므로 최근에는 조합 형태로 적용하는 경우가 대부분이다. 이렇게 초기 과전압이 상당 부분 존재하는 가스방전관에는 추가적으로 TVS나 필터 등을 통해 피크 전압을 제한해 주어야 한다. 본 논문에서는 공통모드 초크코일을 이용한 필터를 적용하여 공통모드와 차동모드의 조합회로를 구성하고, 주파수 대역이 다른 뇌임펄스 전압과 ring wave 전압을 인가하여 파형에 따른 조합회로의 특성을 확인하였다. 다단으로 보호되는 과정을 각각의 측정점에서 잔류전압을 측정하여 단계별로 적용한 SPD들이 어떻게 동작하는지를 실측데이터로 제시하였다. 각 단계의 잔류전압을 비교했을 때 공통모드에 비하여 차동모드에서 서지전압을 제한하는 성능이 보다 효과적이다.

• Journal of Power Electronics
• /
• 제15권5호
• /
• pp.1178-1189
• /
• 2015

A non-isolated Multiple Input Converter (MIC) with an input port, two storage ports and a load port is proposed. The synthesis of the proposed four port converter with its switch realization is presented. A steady state analysis of each operating mode with a small-signal model is derived, and a stability analysis is done. A mode selection controller is proposed to automatically choose a specific operating mode based on the voltage levels of the different source and storage units. In addition, a voltage control loop is used to regulate the output voltage. A 200W prototype is built with a TMS320F28027 DSP controller to test the feasibility of the operating modes. Simulation and experimental results show the ability of the proposed converter to handle multiple inputs either individually or simultaneously.

• Journal of Astronomy and Space Sciences
• /
• 제32권4호
• /
• pp.289-295
• /
• 2015

By adopting a 2D time-dependent wave code, we investigate how mode-converted waves at the Ion-Ion Hybrid (IIH) resonance and compressional waves propagate in 2D density structures with a wide range of field-aligned wavenumbers to background magnetic fields. The simulation results show that the mode-converted waves have continuous bands across the field line consistent with previous numerical studies. These waves also have harmonic structures in frequency domain and are localized in the field-aligned heavy ion density well. Our results thus emphasize the importance of a field-aligned heavy ion density structure for ultra-low frequency wave propagation, and suggest that IIH waves can be localized in different locations along the field line.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.319-320
• /
• 2009

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.307-311
• /
• 2004

In this study, a novel hybrid vehicle is proposed. The vehicle has a flywheel-engine hybrid system. Flywheels are more effective as energy charge systems than electric batteries in a respect of output power density. However, transmissions to effectively drive flywheels are very complex systems such as CVTs (Continuously Variable Transmissions). In the proposed hybrid vehicle, Constant Pressure System is employed, which is hydraulic power transmission. Using Constant Pressure Systems, hydraulic CVTs are easily realized with variable displacement pumps/motors. In this paper, firstly, the proposed flywheel hybrid vehicle making use of Constant Pressure System is described. Secondly, fuel consumption characteristics of the flywheel hybrid vehicle are experimentally examined with the stationary test facility, which employs a flywheel as a load emulating vehicle inertia. Finally, the experimental results and discussions are described. Fuel consumption of 26km/L is expected for 10 mode driving schedule with vehicle mass of 1500kg.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.524-527
• /
• 2004

Hybrid rocket had many advantage with compared to solid and liquid rockets. However, the engines have not yet been used in practical rocket systems, due mainly to the disadvantage of hybrid combustion, such as low fuel regression rate. In this study, lab-scale hybrid motor was designed and manufactured. And the methods of regression rate improvement were considered. Test firings with thrusts up to 300 N were conducted with GOX and transparent PMMA. Thrust was calculated with the pressure of the combustion chamber and the regression rate was measured in with variation of oxidizer flow rate. The regression rates showed a strong dependency on GOX mass flux. The frequency analysis technique of the bulk-mode oscillation of motor was applied to a hybrid rocket motor and was based on the principle that this frequency was inversely proportional to the square root of the chamber volume. Several problems and solutions of operating hybrid rocket were presented.

• 한국항공우주학회지
• /
• 제36권9호
• /
• pp.841-850
• /
• 2008

본 연구에서는 탄소 복합재와 알루미늄 2024-T3 단일겹침 체결부에 대해, 체결방법을 접착, 리벳, 리벳/접착 하이브리드의 세 가지로 변화시키면서 체결방법에 따른 파손하중과 파손모드를 실험을 통해 연구하였다. 세 가지 체결방법에 대해 각각 겹침길이 3가지와 적층순서 2가지, 총 82개의 시편을 제작하였다. 접착제는 FM73m, 리벳은 NAS9308-4-03을 사용하였다. 접착 체결과 하이브리드 체결에서는 겹침길이가 커짐에 따라 파손하중이 증가하였고, 리벳 체결에서는 겹침길이에 따른 파손하중 변화가 나타나지 않았다. 단순 접착 및 리벳 체결부에서는 적층순서에 따른 일관된 경향을 발견하기 어려운 반면, 하이브리드 체결부에서는 인접층의 적층각 차이가 작은 적층판을 사용한 체결부의 파손하중이 높게 나타났다. 접착 체결과 하이브리드 체결의 주된 파손모드는 층간분리이고 리벳 체결은 국부적 베어링 파손을 동반한 리벳 파손으로 나타났다.

• International Journal of Automotive Technology
• /
• 제4권1호
• /
• pp.41-45
• /
• 2003

The 42V Mild Hybrid System has been released into market by Toyota for the first time in the world in 2001. The set-up employs an inverter unit to control the motor/generator (MG) electronically. The driving system called such as Toyota Mild Hybrid System (TMHS) has additional new functions to conventional internal combustion engines. When stopping vehicle, the engine stops promptly. When starting vehicle, by releasing the brake pedal MG starts the vehicle at the same time (EV-driving mode). When stepping on the accelerator pedal, or after a given period of time the engine firing occurs and the engine-driving mode starts. When running by motor, the power is supplied to the motor from 36V battery through the inverter. High outputs and instant responses are required for Inverter. At the same time, the compact volume is required to fit into the limited space of the engine room. The compact size and high output are also required to Power Capacitor used for this inverter. The power capacitors has been newly developed, shaped in "flat" type, suitably for the inverter. The points of developments on inverter and power capacitor are described in this paper.his paper.

• 한국자동차공학회논문집
• /
• 제19권1호
• /
• pp.17-24
• /
• 2011

TMED(Transmission Mounted Electric Device) parallel hybrid configuration can realize EV(Electric Vehicle) mode by disengaging the clutch between an engine and a transmission-mounted motor to improve efficiencies of low load driving and regenerative braking. In the EV mode, however, jerk can be induced since there are insufficient damping elements in the drive-train. Though the jerk gives demoralizing influence upon driving comport, adding a physical damper is not applicable due to constraints of the layout. This study suggests the jerk reduction control, composed of active damping method and torque profiling method, to suppress the jerk without hardware modification. The former method creates a virtual damper by generating absorbing torque in the opposite direction of the oscillation. The latter method reduces impulse on the mated gear teeth of the drive-train by limiting the gradient of traction torque when the direction of the torque is reversed. To validate the effectiveness of the suggested strategy, a series of vehicle tests are carried out and it is observed that the amplitude of the oscillation can be reduced by up to 83%.