• Journal of the Korean Wood Science and Technology
• /
• v.44 no.5
• /
• pp.750-759
• /
• 2016

The $MnO_2$ electrodeposited on the surface of the carbon nanofiber mats ($MnO_2$-LCNFM) were prepared from electrospun lignin-g-PAN copolymer via heat treatments and subsequent $MnO_2$ electrodeposition method. The resulting $MnO_2$-LCNFM was evaluateed for its potential use in a supercapicitor electrode. The increase of $MnO_2$ electric deposition time was revealed to increase diameter of carbon nanofibers as well as $MnO_2$ content on the surface of carbon nanofiber mats as confirmed by scanning electon microscope (SEM) analysis. The electrochemical properties of $MnO_2$-LCNFM electrodes are evaluated through cyclic voltammetry test. It was shown that $MnO_2$-LCNFM electrode exhibited good electrochemical performance with specific capacitance of $168.0mF{\cdot}cm^{-2}$. The $MnO_2$-LCNFM supercapacitor successfully fabricated using the gel electrolyte ($H_3PO_4$/Polyvinyl alcohol) showed to have the capacitance efficiency of ~90%, and stable behavior during 1,000 charging/discharging cycles.

• The Korean Journal of Food And Nutrition
• /
• v.11 no.1
• /
• pp.99-106
• /
• 1998

Two kinds of carrageenan were extracted from red seaweeds, Tichocarpus crinitus, collected in The Peter the Great Bay of Russia on August, 1996. One is KC1-insoluble carrageenan and another is KC1-soluble carrageenan. The yield of KC1-insoluble carrageenan was 17.15%, which is composed of 18.06% total sulfate, 5.61% protein, 3.51% K+, 0.49% Na+, 1.66% Ca2+, 54.26% galactose, 4.68% xylose, trace of mannose and glucose. The yield of KC1-soluble carrageenan was 3.52%, which is composed of 24.06% total sulfate, 5.2% protein, 5.32% K+, 0.16% Na+, 2.80% Ca2+, 33.54% galactose, 5.48% xylose, 4.32% mannose, trace of glucose. But rhamnose was not detected in both case. FT-IR spectrum showed that the KC1-insoluble carrageenan was kappa-type carrageenan and that KC1-soluble carrageenan was lambda, iota hybrid-type carrageenan. KC1-insoluble carrageenan was very weakly formation the gel compared with KC1-insoluble carrageenan from other red seaweeds. So we investigated viscosity. Both type carrageenan was stable in the temperature until 9$0^{\circ}C$, 1 hr. The viscosity of the solution of KC1-insoluble carrageenan was increased to about two folds by K+, but was not changed by Ca2+. The viscosity of the solution of KC1-soluble carrageenan was reduced by K+ and Ca2+. Both of them was stabilized in alkali but was reduced in comparison with acid conditions. In this study, both carrageenan was expected as thickening agent than gelling agent for food additives.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.2
• /
• pp.152-161
• /
• 2015

CodY is a highly conserved protein in low G+C gram-positive bacteria that regulates genes involved in sporulation and stationary-phase adaptation. Bacillus thuringiensis is a grampositive bacterium that forms spores and parasporal crystals during the stationary phase. To our knowledge, the regulatory mechanism of CodY in B. thuringiensis is unknown. To study the function of CodY protein in B. thuringiensis, BMB171codY^- was constructed in a BMB171 strain. A shuttle vector containing the ORF of cry1Ac10 was transformed into BMB171 and BMB171codY^-, named BMB171cry1Ac and BMB171codY^-cry1Ac, respectively. Some morphological and physiological changes of codY mutant BMB171codY^-cry1Ac were observed. A comparative proteomic analysis was conducted for both BMB171codY^-cry1Ac and BMB171cry1Ac through two-dimensional gel electrophoresis and MALDI-TOF-MS/MS analysis. The results showed that the proteins regulated by CodY are involved in microbial metabolism, including branched-chain amino acid metabolism, carbohydrate metabolism, fatty acid metabolism, and energy metabolism. Furthermore, we found CodY to be involved in sporulation, biosynthesis of poly-β-hydroxybutyrate, growth, genetic competence, and translation. According to the analysis of differentially expressed proteins, and physiological characterization of the codY mutant, we performed bacterial one-hybrid and electrophoretic mobility shift assay experiments and confirmed the direct regulation of genes by CodY, specifically those involved in metabolism of branched-chain amino acids, ribosomal recycling factor FRR, and the late competence protein ComER. Our data establish the foundation for in-depth study of the regulation of CodY in B. thuringiensis, and also offer a potential biocatalyst for functions of CodY in other bacteria.

• Korean Journal of Microbiology
• /
• v.31 no.4
• /
• pp.286-291
• /
• 1993

The $Km^{r}$ gene and plasmid of natural isolate and genetically modified microorganisms (GMM) rearranged by conjugation in water environments were comparatively analyzed by agarose gel electrophoresis and Southern analysis. The transfer rates of the $Km^{r}$ gene from GMM strains were generally 100 times higher than thosc of natural iso]ate(DKI) under laboratory cnvironments, but their transfer rate was not much different in Moosimcheon River water. The conjugants obtained in LB(Luria-Bertani broth) and FW(filtered river water) water under laboratory conditions showed same number of the plasmids. but the sizes of the plasmids were changed. The $Km^{r}$ gene in the conjugants was found in the same position as the pDKJO] $Km^{r}$ plasmid. In case of the GMM strains as donor. the large plasmids of 180 kb appeared in conjugants obtained in LB and FW water. Especially, the $Km^{r}$ gene in the donor of DKC600 was found to be inserted into chromosome of the conjugant obtained in FW water. However. in the conjugants obtained from DKl and DKB 701 in Moosimcheon River water, the plasmids were rearranged by 4 and 8. respectively, and all of them showed hybridization by the $Km^{r}$ probe. But the small plasmids of the recipient disappeared in the conjugant from DKC600 as donor, and the rearranged plasm ids and chromosome in the conjugants were observed to be hybridized with the $Km^{r}$ probe. Therefore, rearrangement of $Km^{r}$ gene and plasmids by conjugation was found to be afTected diversely by cellular characteristics as well as by environmental factors.

• Korean Journal of Metals and Materials
• /
• v.56 no.12
• /
• pp.885-892
• /
• 2018

Molybdenum disulfide ($MoS_2$) based electrocatalysts have been proposed as substitutes for platinum group metal (PGM) based electrocatalyst to hydrogen evolution reaction (HER) in water electrolysis. Here, we studied $MoS_2/CNFs$ hybrid catalyst prepared by electrospinning method with heat treatment for polymer electrolyte membrane(PEM) water electrolysis to improve the HER activity. The physicochemical and electrochemical properties such as average diameter, crystalline properties, electrocatalitic activity for HER of synthesized $MoS_2/CNFs$ were investigated by the Scanning Electron Microscope (SEM), X-ray Diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), Transmission Electron Microscopy (TEM), Raman Spectroscopy (Raman) and Linear Sweep Voltammetry (LSV). The as spun ATTM/PVP nanofibers were prepared by sol-gel and electrospinning method. Subsequently, the $MoS_2/CNFs$ was dereived from reduction heat treatment of ATTM at the ATTM/PVP nanofibers and carbonization heat treatment. Synthesized $MoS_2/CNFs$ electrocatalyst had an average diameter of $179{\pm}30nm$. We confirmed that the $MoS_2$ layers in $MoS_2/CNF$ electrocatalyst consist of 3~4 layers from the Raman results. In addition, We confirmed that the $MoS_2$ layers in $MoS_2/CNF$ catalyst consist of 7.47% octahedral 1T phase $MoS_2$, 63.77% trigonal prismatic 2H phase $MoS_2$ with 28.75% $MoO_3$ through the XRD, Raman and XPS results. It was shown that $MoS_2/CNFs$ had the overpotential of 0.278 V at $10mA/cm^2$ and tafel slope of 74.8 mV/dec in 0.5 M sulfuric acid ($H_2SO_4$) electrolyte.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.1
• /
• pp.54-60
• /
• 2003

This study evaluated the influence of chemomechanical caries removal agent $Carisolv^{TM}$(MediTeam, Sweden) for composite resin adhesion to sound human permanent and primary dentin. The buccal/labial surfaces of 80 permanent molars and 80 primary incisors were used. Four types of adhesives and one composite resin were used; AQ Bond(Sun Medical, Japan), Clearfil SE Bond(Kuraray, Japan), Single Bond(3M, USA), Scotchbond Multi-Purpose(3M, USA) and Z100(3M, USA). One drop of $Carisolv^{TM}$(MediTeam, Sweden) was pretreated on the dentin for 0 second(control) and 60 seconds. The specimens were thermocycled for 1,000 times in baths kept 5 degrees C and 55 degrees C with a 30 seconds dwell time. Shear bond strengths were tested and the data was statistically analyzed using one-way ANOVA with subsequent post hoc Scheffe test at p<0.05. $Carisolv^{TM}$ treatment significantly decreased the shear bond strength. Shear bond strength of permanent dentin was significantly higher than that of primary dentin. Clearfil SE Bond treatment groups showed the highest shear bond strength and AQ Bond treatment groups showed the lowest shear bond strength.

• The Journal of Natural Sciences
• /
• v.4
• /
• pp.103-142
• /
• 1991

These studies were carried out to select somatic hybrid using selectable marker genes of Nicotiana glauca transformed by NPTII gene and Solanum tuberosum transformed by T- DNA, and to study characteristics of transformant. The results are summarized as follows. 1. Crown gall tumors and hairy roots were formed on potato tuber disc infected by A. tumefaciens Ach5 and A. rhizogenes ATCC15834. These tumors and roots could be grown on the phytohormone free media. 2. Callus formation from hairy root was prompted on the medium containing 2, 4 D 2mg/I with casein hydrolysate lg/l. 3. The survival ratio of crown gall tumor callus derived from potato increased on the medium containing the activated charcoal 0. 5-2. 0mg/I because of the preventions on the other hand, hairy roots were necrosis on the same medium. 4. Callus derived from hairy root were excellently grown for a short time by suspension culture on liquid medium containing 2, 4-D 2mg/I and casein hydrolysate lg/l. 5. The binary vector pGA643 was mobilized from E. coli MC1000 into wild type Agrobacteriurn tumefaciens Ach5, A. tumefaciens $A_4T$ and disarmed A. tuniefaciens LBA4404 using a triparental mating method with E. ccli HB1O1/pRK2013. Transconjugants were obtained on the minimal media containing tetracycline and kanamycin. pGA643 vectors were confirmed by electrophoresis on 0.7% agarose gel. 6. Kanamycin resistant calli were selected on the media supplemented with 2, 4-D 0.5mg/1 and kanamycin $100\mug$/ml after co- cultivating with tobacco stem explants and A. tumefaciens LBA4404/pGA643, and selected calli propagated on the same medium. 7. The multiple shoots were regenerated from kanamycin resistant calli on the MS medium containing BA 2mg/l. 8. Leaf segments of transformed shoot were able to grow vigorusly on the medium supplemented with high concentration of kanamycin $1000\mug$/ml. 9. Kanamycin resistant shoots were rooting and elongated on medium containing kanamycin $100\mug$/ml, but normal shoot were not. 10. For the production of protoplast from potato calli transformed by T-DNA and mesophyll tissue transformed by NPTII gene, the former was isolated in the enzyme mixture of 2.0% celluase Onozuka R-10, 1.0% dricelase, 1.0% macerozyme. and 0.5M mannitol, the latter was isolated in the enzyme mixture 1.0% Celluase Onozuka R-10, 0.3% macerozyme, and 0.7M mannitol. 11. The optimal concentrationn of mannitol in the enzyme mixture for high protoplast yield was 0.8M at both transformed tobacco mesophyll and potato callus. The viabilities of protoplast were shown above 90%, respectively. 12. Both tobacco mesophyll and potato callus protoplasts were fused by using PEG solution. Cell walls were regenerated on hormone free media supplemented with kanamycin after 5 days, and colonies were observed after 4 weeks culture.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.3
• /
• pp.516-526
• /
• 2004

Polymerization shrinkage of photoinitiation type composite resin cause several clinical problems. The purpose of this study was to evaluate the shrinkage strain stress, linear polymerization shrinkage, compressive strength and microhardness of recently developed composite resins. The composite resins were divided into four groups according to the contents of matrix and filler type. Group I : $Denfil^{TM}$(Vericom, Korea) with conventional matrix, Group II : $Charmfil^{(R)}$(Dentkist, Korea) with microfiller and nanofller mixture, Group III : $Filtek^{TM}$ Z250(3M-ESPE, USA) TEGDMA replaced by UDMA and Bis-EMA(6) in the matrix, and Group IV : $Filtek^{TM}$ Supreme(3M-ESPE, USA) using pure nanofiller. Preparation of acrylic molds were followed by filling and curing with light gun. Strain gauges were attached to each sample and the leads were connected to a strainmeter. With strainmeter shrinkage strain stress and linear polymerization shrinkage was measured for 10 minutes. The data detected at 1 minute and 10 minutes were analysed statistically with ONE-way ANOVA test. To evaluate the mechanical properties of tested materials, compressive hardness test and microhardness test were also rendered. The results can be summarized as follows : 1. Filling materials in acrylic molds showed initial temporary expansion in the early phase of polymerization. This was followed by contraction with the rapid increase in strain stress during the first 1 minute and gradually decreased during post-gel shrinkage phase. After 1 minute, there's no statistical differences of strain stress between groups. The highest strain stress was found in group IV and followed by group III, I, II at 10 minutes-measurement(p>.05). In regression analysis of strain stress, group III showed minimal inclination and followed by group II, I, IV during 1 minute. 2. In linear polymerization shrinkage test, the composite resins in every group showed initial increase of shrinkage velocity during the first 1 minute, followed by gradually decrease of shrinkage velocity. After 1 minute, group IV and group III showed statistical difference(p<.05). After 10 minutes, there were statistical differences between group IV and group I, III(p<.05) and between group II and group III(p<.05). In regression analysis of linear polymerization shrinkage, group II showed minimal inclination and followed by group IV, III, I during 1 minute. 3. In compressive strength test, group III showed the highest strength and followed by group II, IV, I. There were statistical differences between group III and group IV, I(p<.05). 4. In microhardness test, upper surfaces showed higher value than lower surfaces in every group(p<.05).

• Restorative Dentistry and Endodontics
• /
• v.33 no.1
• /
• pp.9-19
• /
• 2008

The purpose of this study was: (1) to compare nanoleakage patterns of a conventional 3-step etch and rinse adhesive system and two experimental hydrophobic adhesive systems and (2) to investigate the change of the nanoleakage patterns after load cycling. Two kinds of hydrophobic experimental adhesives, ethanol containing adhesive (EA) and methanol containing adhesive (MA), were prepared. Thirty extracted human molars were embedded in resin blocks and occlusal thirds of the crowns were removed. The polished dentin surfaces were etched with a 35 % phosphoric acid etching gel and rinsed with water. Scotchbond Multi-Purpose (MP), EA and MA were used for bonding procedure. Z-250 composite resin was built-up on the adhesive-treated surfaces. Five teeth of each dentin adhesive group were subjected to mechanical load cycling. The teeth were sectioned into 2 mm thick slabs and then stained with 50 % ammoniacal silver nitrate. Ten specimens for each group were examined under scanning electron microscope in backscattering electron mode. All photographs were analyzed using image analysis software. Three regions of each specimen were used for evaluation of the silver uptake within the hybrid layer. The area of silver deposition was calculated and expressed in gray value. Data were statistically analyzed by two-way ANOVA and post-hoc testing of multiple comparisons was done with the Scheffe's test. Silver particles were observed in all the groups. However, silver particles were more sparsely distributed in the EA group and the MA group than in the MP group (p < .0001). There were no changes in nanoleakage patterns after load cycling.

• The Journal of the Korean Society for Microbiology
• /
• v.21 no.1
• /
• pp.151-161
• /
• 1986

In order to develop sensitive and sepcific assay methods for E. coli heat labile enterotoxin(LT) hybridoma cell lines secreting LT specific monoclonal antibody were obtained. LT was purified from cell lysate of E. coli O15H11. The steps included disruption of bacteria by French pressure, DEAE Sephacel ion exchange chromatography, Sephadex G200 gel filtration, and second DEAE Sephacel ion exchange chromatography, successively. Spleen cells from Balb/c mice immunized with the purified LT and $HGPRT^{(-)}$ plasmacytomas, $P3{\times}63Ag8.V653$ were mixed and fused by 50% (w/v) PEG. Hybrid cells were grown in 308 wells out of 360 wells, and 13 wells out of them secreted antibodies reacting to LT. Among these hybridoma cell 1G8-1D1 cell line was selected since it had produced high-titered monoclonal antibody continuously. By using culture supernatant and ascites from 1G8-1D1 cells the monoclonal antibody was characterized, and an assay system for detecting enterotoxigenic E. coli was established by double sandwich enzyme-linked immunosorbent assay (ELISA). The following results were obtained. 1. Antibody titers of culture supernatant and ascites from 1G8-1D1 hybridoma cells were 512, and 102, 400, respectively by GM1-ELISA and its immunoglobulin class was IgM. 2. The maximum absorption ratio of 1G8-1D1 cell culture supernatant to LT was 90% at $300\;{\mu}g/ml$ of LT concentration. LT concentration shown at 50% absorption ratio was $103.45{\mu}g$ and the absorption ratio was decreased with tile reduction of LT concentration. This result suggests that monoclonal antibody from 1G8-1D1 hybridoma cell bound with LT specifically. 3. The reactivities of 1G8-1D1 cell culture supernatant to LT and V. cholerae enterotoxin(CT) were 0.886 and 0.142(O.D. at 492nm) measured by the GM1-ELISA, indicating 1G8-1D1 monoclonal antibody reacted specifically with LT but not with CT. 4. The addition of 0.1ml of ascites to 0.6mg and 0.12mg of LT decreased the vascular permeability factor to 41% and 44% respectively, but it did not completely neutralize LT. 5. By double sandwich ELISA using monoclonal antibody, as little as 75ng of the purified LT per ml could be detected. 6. The results by assay of detecting LT in culture supernatants of 14 wild strains E. coli isolated from diarrhea patients by the double sandwich ELISA were almost the same level as those by reverse passive latex agglutination.