• 한국건축시공학회지
• /
• 제16권3호
• /
• pp.279-288
• /
• 2016

The fundamental performance of any construction material should cover at least two phases: safety and serviceability. Safety commonly represents adequate strength, while serviceability encompasses the control of cracking and deflections at service loads. With respect to rapid hydraulic binders as a construction material, the above two phases should also be considered. Recent research on rapid cooling ladle furnace slag (RC-LFS) has drawn much attention, particularly given that it shows remarkable rapid hydraulic ability to pulverize to a fineness of $6,300cm^2/g$. This industrial byproduct could contribute to developing the sustainability of the rapidly hardening cementitious material system. This paper aims to expand upon the applicability of an RC-LFS-based binder that is composed of two parts. It also seeks to illustrate the engineering performance of an RC-LFS-based hybrid fiber-reinforced composite and to increase the strength of the RC-LFS-based composite. Each step of this experiment followed ASTM standards. The engineering performance, in both fresh state and hardening state, was tested and discussed in this paper. According to the experimental results for fresh concrete, the air content increased following the addition of polypropylene fiber. For hardened concrete, the toughness and strength improved following the addition of a hybrid fiber. The hybrid fiber mixture, which contains 0.75% of steel fiber and 0.25% of polypropylene fiber, shows even better engineering performance than other mixtures.

• 폴리머
• /
• 제37권1호
• /
• pp.34-40
• /
• 2013

아민 작용기를 가진 POSS에 toluene diisocyanate(TDI)와 caprolactam(CL)의 반응물을 반응시켜 POSS 기반의 하이브리드 충전제(POSS-(TDI+CL))를 합성하였고 이를 상업용 폴리아미드계 열가소성 탄성체인 PA-TPE에 블렌딩하여 PA-TPE/POSS-(TDI+CL) 복합체를 제조하였다. POSS계 충전제의 화학구조는 FTIR과 $^1H$ NMR을 사용하여 확인하였다. PA-TPE/POSS-(TDI+CL) 복합체는 충전제를 PA-TPE에 7 wt%까지 첨가하여 제조하였고 이들은 순수 PA-TPE와 변성되지 되지 않은 PA-TPE/octaphenyl POSS의 복합체보다 낮은 tension set 값을 보여 탄성회복력이 향상되었다. 또한 하이브리드 충전제의 함량이 증가함에 따라 인장강도와 모듈러스가 증가하였다. 결론적으로 하이브리드 충전제인 POSS-(TDI+CL)는 원래 PA-TPE의 탄성에 나쁜 영향을 미치지 않고도 기계적 물성을 향상시킬 수 있는 적절한 충전제라 볼 수 있다.

• 대한전자공학회논문지SD
• /
• 제44권11호
• /
• pp.20-25
• /
• 2007

SiOC 박막과 같은 유무기 하이브리드 실리카 물질에서의 열처리효과에 의한 결합구조의 변화와 유전상수에 관하여 연구하였다. 유무기 하이브리드 실리카 물질은 BTMSM과 산소의 혼합가스를 이용한 CVD방법에 의하여 증착되었다. 유무기 하이브리드 실리카 물질은 증착조건에 따라 3가지 유형으로 분류되었으며, 유전상수는 MIS 구조에 의하여 조사되었다. XPS 분석에 의하여 C 1s 스펙트라는 O2/BTMSM=1.5의 유량비를 갖는 박막에서 282.9 eV의 organometallic carbon 반응을 보여주는 피크를 나타내었다. organometallic carbon반응의 결과는 안정성 있는 크로스 링크 결합구조를 만들어내며, 하이브리드 특성을 갖는 이 박막에서 열처리 후 유전상수는 가장 낮았다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.621-625
• /
• 2005

This paper presents a new hybrid serial-parallel robot(HSPR), which has six degrees of freedom driven by ball screw linear actuators and motored joints. This hybrid robot design presents a compromise between high rigidity of fully parallel manipulators and extended workspace of serial manipulators. The hybrid robot has a large, singularity-free workspace and high stiffness. Therefore, the presented kinematic structure of the hybrid robot is particularly suitable for multi-tasking machining processes such as milling, drilling, deburring and grinding. In addition to the machining processes, the hybrid robot can be used for welding, fixturing, material handling and so on. The study on design of the hybrid robot is performed. A kinematic analysis and mechanism description of the hybrid robot with six-controlled degree of freedom is presented. In the virtual design works by DADS, workspace and force analysis are discussed. A numerical model is treated to demonstrate our analysis and to determine the range of permissible extension of the struts. Also, we determine some important design parameters for the hybrid robot.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.3-3
• /
• 2004

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권2호
• /
• pp.26-30
• /
• 2001

This paper deals with the feasibility assessment of hybrid linear motor that operates based on self-moving cell concept. The moving cell is composed of Magnetostrictive actuator and a ring structure, and a cell train is constructed by connecting two cells in series. Since this motor uses strong push force of Terfenol-D actuators and friction of the cells, it can essentially produce long stroke and large force. The overall performance of the motor was measured in terms of speed and force.

• 한국전기전자재료학회논문지
• /
• 제17권1호
• /
• pp.75-82
• /
• 2004

We have studied the influence of rubbing directions on electro-optic characteristics of the fringe field driven hybrid aligned nematic liquid crystal (LC) cell by computer simulation. When a LC with positive dielectric anisotropy is used, the results show that the driving voltage and transmittance decreases as the rubbing direction with respect to horizontal electric field direction increases. The reason for decrease in light transmission is the increase of tilt angle on the center of common electrode. In this paper, we have studied how the rubbing angle effects on the transmittance of the cell by investigating a distribution of electric field and LC director.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.78-83
• /
• 2001

In this work, the surface of inorganic fillers were modified with some functional groups such as stearic acid, aliphatic long chain, vinylsilane and aminosilane to control the interaction between inorganic fillers and polymer matrix. Ethylene-vinyl acetate copolymers (EVA) with various amount of vinyl-acetate content and copolyether-ester elastomer were used as polymer matrix. The addition of inorganic fillers increases flame retardancy, but results in steep drop of electrical and mechanical properties, which may be caused by the defect in the interface between organic/inorganic hybrid composites. The hybrid composites are found to show better mechanical properties and higher volume resistivities as inorganic fillers are well dispersed and have good adhesion with polymer matrix. Also, the most effective type of functional group coated on fillers depends on the chemical structure of polymer.

• 한국전기전자재료학회논문지
• /
• 제19권4호
• /
• pp.391-397
• /
• 2006

We present investigations of a hybrid type superconducting fault current limiter (SFCL), which consists of transformers and resistive superconducting elements. The secondary windings of the transformer were separated into several electrically isolated circuits and linked inductively with each other by mutual flux, each of which has a superconducting current limiting element of $YBa_2Cu_3O_7$ (YBCO) stripes as a current limiting element. Simple connection in series of the SFCL elements tends to produce ill-timed quenching because of power dissipation unbalance between SFCL elements. Both electrical isolation and mutual flux linkage of the elements provides a solution to power dissipation unbalance, inducing simultaneous quench and current redistribution of the YBCO films. This design enables to increase the voltage rating of SFCL with given YBCO stripes.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1219-1221
• /
• 2008

The Authors have demonstrated highly efficient white organic light-emitting diodes using hybrid-spacer which was inserted between each emitting layer or/and codoped blue emitting layers with the different functional material. The characteristics of WOLEDs showed the maximum external quantum efficiency of 13.8%, power efficiency of 33.66 lm/W, and Commission Internationale de I'Eclairage coordinates of (x=0.36, y=0.37), respectively.