• The Plant Pathology Journal
• /
• v.23 no.1
• /
• pp.34-36
• /
• 2007

Introduction of vegetatively propagated Petunia hybrids since 1992 led to increasing virus infections of propagation material. Petunia hybrid 'Surfinia' cultivated for pot-plant showed yellowing symptom along with stunt. Flowers were smaller in size and showed color-break symptom. Tobacco mosaic virus(TMV-pet) was isolated from the diseased petunia. Healthy petunia plants inoculated with TMV-pet induced mottle on leaves and color-break on flowers, and plants were stunted. Nucleotide sequences of coat protein gene amplified from RNA prepared from Nicotiana tabacum cv. Samsun infected with TMV-pet were determined(GenBank accession no. DQ981481). It showed 99.0% nucleotide sequence homology with TMV-potato3-2(GenBank accession no. AF318215) isolated from potato showing yellow mosaic and stunt symptom, and with a TMV Korean strain(GenBank accession no. X68110). This is the first reported observation of TMV from vegetatively propagated petunia in Korea.

• Molecules and Cells
• /
• v.42 no.4
• /
• pp.356-362
• /
• 2019

The binding of MS2 bacteriophage coat protein (MCP) to MS2 binding site (MBS) RNA stem-loop sequences has been widely used to label mRNA for live-cell imaging at single-molecule resolution. However, concerns have been raised recently from studies with budding yeast showing aberrant mRNA metabolism following the MS2-GFP labeling. To investigate the degradation pattern of MS2-GFP-labeled mRNA in mammalian cells and tissues, we used Northern blot analysis of ${\beta}$-actin mRNA extracted from the Actb-MBS knock-in and $MBS{\times}MCP$ hybrid mouse models. In the immortalized mouse embryonic cell lines and various organ tissues derived from the mouse models, we found no noticeable accumulation of decay products of ${\beta}$-actin mRNA compared with the wild-type mice. Our results suggest that accumulation of MBS RNA decay fragments does not always happen depending on the mRNA species and the model organisms used.

• Korean Journal of Breeding Science
• /
• v.41 no.4
• /
• pp.664-668
• /
• 2009

"Boram" is a new $F_1$ hybrid of rapeseed (Brassica napus L.) with early maturing, high yield and high oleic acid. This cultivar was developed from the cross between Mokpo-CGMS (male steile line) and 8634-B-1-3-1-8 (restore line) for the production of edible oil and biodiesel in 2006. Yield trials were conducted from 2007 to 2008 and regional adaptation trials were examined at four locations in 2008. "Boram" has green and parted leaf, yellowish flower, and black seed coat. The ripening period of "Boram" is similar to "Sunmang", but 3 days faster than "Tammiyuchae". The average seed yield of the regional adaptation trials was 424 kg/10a, which was 11 and 48% higher than "Sunmang" and "Tammiyuchae" variety. Total oil content of "Boram" was 44.2%. In fatty acid composition, "Boram" has no erucic acid. However, oleic acid content is 68.5%, which is 3.7 and 5.4% higher than "Tammiyuchae" and "Sunmang". And total glucosinolate content was 2.27mg/g. Therefore this variety is recommended as a leading variety at southwestern areas including Jeonnam, Jeonbuk and Kyeongnam provinces and Jeju island of Korea.

• Restorative Dentistry and Endodontics
• /
• v.31 no.6
• /
• pp.445-451
• /
• 2006

The purposes of this study were to compare the effects of one or two applications of all-in-one adhesives on microtensile bond strengths (${\mu}$TBS) to unground enamel and to investigate the morphological changes in enamel surfaces treated with these adhesives using a scanning electron microscopy (SEM). Twenty-five noncarious, unrestored human mandibular molars were used. The unground enamel surfaces were cleansed with pumice. The following adhesives were applied to lingual, mid-coronal surfaces according to manufacture's directions; Clearfil SE bond in SE group, Adper Prompt L-Pop$^{TM}$1 coat in LP1 group, 2 coats in LP2 group, Xeno$^{\R}$III1 coat in XN1 group, and 2 coats in XN2 group. After application of the adhesives, a hybrid light-activated resin composite was built up on the unground enamel. Each tooth was sectioned to make a cross-sectional area of approximately 1.0 mm$^2$ for each stick. The microtensile bond strength was determined. Each specimen was observed under SEM to examine the morphological changes. Data were analyzed with one-way ANOVA. The results of this study were as follows; 1. The microtensile bond strength values were; SE (19.77 ${\pm}$ 2.44 MPa), LP1 (13.88 ${\pm}$ 3.67 MPa), LP2 (14.50 ${\pm}$ 2.52 MPa), XN1 (14.42 ${\pm}$ 2.51 MPa) and XN2 (15.28 ${\pm}$ 2.79 MPa). SE was significantly higher than the other groups in bond strength (p < 0.05). All groups except SE were not significantly different in bond strength (p < 0.05). 2. All groups were characterized as shallow and irregular etching patterns.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.5
• /
• pp.60-66
• /
• 2010

Zinc has a number of characteristics that make it well suited for use as a coating to protecting iron and steel products from corrosion. Its excellent corrosion resistance in most environments accounts for its successful use as a protective coating on a variety of products and in many exposure conditions. The excellent field performance of zinc coatings results from their ability to form dense, adherent films that corrode at a rate that ranges from 1% to 10% of the corrosion rate of ferrous materials, depending on the environment. Recently, EU RoHS and EU ELV prohibited the use of materials that adversely affect the environment, such as Pb, Hg, Cd, and $Cr^{+6}$. In this study, environmentally-friendly, Cr-free solutions (epoxy solution, acrylic solution, and urethane solution S-700) and organic/inorganic solution with Si; LRO-317) were used to evaluate the corrosion resistance of zinc-coated steel subjected to a saltwater spray for 72 hours. The coating of urethane solution (S-700) was best among the three kinds of solution with heat treatment during five minutes at $190^{\circ}F$. Test specimens with S-700 and LRO-317 coating were heat treated in a drying oven at 170, 180, 190, 200, and $210^{\circ}C$ for five minutes. The results show that the optimum corrosion resistance was $190^{\circ}C$ in EGI and $170^{\circ}C$ in HDGI, respectively.

• Mycobiology
• /
• v.43 no.1
• /
• pp.31-36
• /
• 2015

We have previously isolated ${\varepsilon}$-COP, the ${\alpha}$-COP interactor in COPI of Aspergillus nidulans, by yeast two-hybrid screening. To understand the function of ${\varepsilon}$-COP, the $aneA^+$ gene for ${\varepsilon}$-COP/AneA was deleted by homologous recombination using a gene-specific disruption cassette. Deletion of the ${\varepsilon}$-COP gene showed no detectable changes in vegetative growth or asexual development, but resulted in decrease in the production of the fruiting body, cleistothecium, under conditions favorable for sexual development. Unlike in the budding yeast Saccharomyces cerevisiae, in A. nidulans, over-expression of ${\varepsilon}$-COP did not rescue the thermo-sensitive growth defect of the ${\alpha}$-COP mutant at $42^{\circ}C$. Together, these data show that ${\varepsilon}$-COP is not essential for viability, but it plays a role in fruiting body formation in A. nidulans.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.2
• /
• pp.296-304
• /
• 2014

For this research, prepared polyurethane dispersion of hard segment type and polyethylene emulsion wax. Use these resin, this article has been analyzed about mechanical properties variation by increasing amount of polyethylene emulsion wax on Lam skin leather and dried film. According to measure data for solvent resistance, PUD had good property. As known in the results, increase of polyethylene wax constant did not influence to big variation of hybrid resin properties. As test of tensile strength, PUD had good tensile characteristic($1.235kg_f/mm^2$) and PUD-EW4 had lowest tensile characteristic($1.022kg_f/mm^2$). As same as tensile characteristic, abrasion test determined PUD(52.225 mg.loss) had highest properties. In elongation case, PUD showed 698 % modulus which was best properties in this experiment.

• The Plant Pathology Journal
• /
• v.36 no.6
• /
• pp.536-557
• /
• 2020

Sugarcane yellow leaf virus (SCYLV) is a distinct member of the Polerovirus genus of the Luteoviridae family. SCYLV is the major limitation to sugarcane production worldwide and presently occurring in most of the sugarcane growing countries. SCYLV having high genetic diversity within the species and presently ten genotypes are known to occur based on the complete genome sequence information. SCYLV is present in almost all the states of India where sugarcane is grown. Virion comprises of 180 coat protein units and are 24-29 nm in diameter. The genome of SCYLV is a monopartite and comprised of single-stranded (ss) positive-sense (+) linear RNA of about 6 kb in size. Virus genome consists of six open reading frames (ORFs) that are expressed by sub-genomic RNAs. The SCYLV is phloem-limited and transmitted by sugarcane aphid Melanaphis sacchari in a circulative and non-propagative manner. The other aphid species namely, Ceratovacuna lanigera, Rhopalosiphum rufiabdominalis, and R. maidis also been reported to transmit the virus. The virus is not transmitted mechanically, therefore, its transmission by M. sacchari has been studied in different countries. SCYLV has a limited natural host range and mainly infect sugarcane (Sachharum hybrid), grain sorghum (Sorghum bicolor), and Columbus grass (Sorghum almum). Recent insights in the protein-protein interactions of Polerovirus through protein interaction reporter (PIR) technology enable us to understand viral encoded proteins during virus replication, assembly, plant defence mechanism, short and long-distance travel of the virus. This review presents the recent understandings on virus biology, diagnosis, genetic diversity, virus-vector and host-virus interactions and conventional and next generation management approaches.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.3
• /
• pp.265-269
• /
• 2021

This study was conducted to provide primary data through analysis of zoysia grass genetic resources to develop grass cultivars with beneficial novel properties. Zoysia grass (Zoysia. spp) is native to Korea, and is mainly propagated through stolons. However, since seed coat treatment technology was developed, the breeding of sexually reproductive grass variants has become possible, necessitating characterization of the floret appearance rate in the secured zoysia grass genetic resource before developing sexually reproductive cultivars. In this experiment, 549 grass lines were examined, revealing that florets appear in only 43 lines (7.81%). Survival rates after transplantation, and stolon generation rates displayed a significant positive correlation (Rho = 0.44). Survival rates after transfer, and rates of stolon production displayed very low correlations with floret appearance (Rho = -0.11 and Rho = -0.06). No significant results were obtained in 43 lines that displayed >20% floret appearance. To breed sexually reproductive grass variants, it is thus necessary to secure more genetic resources, considering the low rate of floret appearance. Finding traits that predict floret appearance at an early stage is also required.