• Biotechnology and Bioprocess Engineering:BBE
• /
• 제10권4호
• /
• pp.367-371
• /
• 2005

About 3,000 bacterial colonies with esterase activities were isolated from soil samples by enrichment culture and halo-size on Luria broth-tributyrin (LT) plates. The colonies were assayed for esterase activity in microtiter plates using enantiomerically pure (R)- and (S)-2-phenylbutyric acid resorufin ester (2PB-O-res) as substrates. Two enantioselective strains (JH2 and JH13) were selected by the ratio of initial rate of hydrolysis of enantiomerically pure (R)- and (S)-2-PB-O-res. When cell pellets were used, both strains showed high apparent enantioselectivity ($E_{app}>100$) for (R)-2PB-O-res and were identified as Exiguobacterium acetylicum. The JH13 strain showed high esterase activity on p-nitrophenyl acetate (pNPA), but showed low lipase activity on p-nitrophenyl palmitate (pNPP). The esterase was located in the soluble fraction of the cell extract. The crude intracellular enzyme preparation was stable at a pH range from 6.0 to 11.0.

• Journal of Pharmaceutical Investigation
• /
• 제37권2호
• /
• pp.113-117
• /
• 2007

The aim of this study was to investigate the effect of different wall material on the microencapsulation efficiency of microcapsules containing fish oil. The present work reports on the microencapsulation of fish oil by spray drying using hydroxypropyl methylcellulose (HPMC) 2910, maltodextrin, gelatin, sodium caseinate as wall materials. The emulsion stability was assessed by emulsion stability index value (ESI). The microstructural properties of microcapsules was evaluated by scanning electron microscopy (SEM) and microencapsulation efficiency (ME) was assessed by soxhlet method. The highest ESI and ME were observed in the case of a 1:1 gelatin/sodium caseinate ratio and 1:1 glycerin fatty acid ester/lecithin ratio, and ME of microcapsules was increased with increasing the ESI of emulsion. Thus, the stability of emulsion was a critical factor for the encapsulation of fish oil.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.207-207
• /
• 2008

Modern industry has focused on processing that produce low- loss dielectric substrates used complex micron-sized devices using tick film technologies such as tape casting and slip casting. However, these processes have inherent disadvantages fabricating high density interconnect with embedded passives for high speed communication electronic devices. Here, we have successfully fabricated porous alumina dielectric layer infiltrated with polymer solution by using inkjet printing process. Alumina suspensions were formulated as dielectric ink that were optimized to use in inkjet process. The layer was confirmed by field emission scanning electron microscope (FE-SEM) for measuring microstructure and volume fraction. In addition, the reaction kinetics and electrical properties were characterized by FT-IR and the impedance analyzer. The volume fraction of alumina in porous dielectric alumina layer is around 70% much higher than that in the conventional process. Furthermore, after infiltration on the dielectric layer using polymer resins such as cyanate ester. Excellent Q factors of the dielectric is about 200 when confirmed by impedance analyzer without any high temperature process.

• Bulletin of the Korean Chemical Society
• /
• 제32권7호
• /
• pp.2187-2192
• /
• 2011

Hydrogen peroxide plays a key role as a second messenger in the normal cellular signaling but its overproduction has been implicated in various life-threatening diseases. Peroxalate chemiluminescence is the light emission from a three component reaction between peroxalate, hydrogen peroxide and fluorophores. It has proven great potential as a methodology to detect hydrogen peroxide in physiological environments because of its excellent sensitivity and specificity to hydrogen peroxide. We developed chemiluminescent micelles composed of amphiphilic polymers, peroxalate and fluorescent dyes to detect hydrogen peroxide at physiological concentrations. In this work, we studied the relationship between the chemiluminescence reactivity and stability of peroxalate by varying the substitutes on the aryl rings of peroxalate. Alkyl substitutes on the aryl ring of peroxalate increased the stability against water hydrolysis, but diminished the reactivity to hydrogen peroxide. Chemiluminescent micelles encapsulating diphenyl peroxalate showed significantly higher chemiluminescence intensity than the counterpart encapsulating dimethylphenyl or dipropylphenyl peroxalate. Diphenyl peroxalate-encapsulated micelles could detect hydrogen peroxide generated from macrophage cells stimulated by lipopolysaccharide (LPS) and image hydrogen peroxide generated during LPS-induced inflammatory responses in a mouse.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.358-361
• /
• 2001

A new photoalignment material PMI5CA, poly{N-(phenyl)maleimide-co-3-[4-(pentyloxy) cinnamate]propyl-2-hydroxy-1-methacrylate}, was synthesized and the electra-optical (EO) characteristics in the vertical-aligned (VA) liquid crystal display (LCD) photo-aligned on the photopolymer surface were studied. Excellent voltage-transmittance(V-T) characteristics in the VA-LCD photoaligned with polarized UV exposure of oblique direction on the pohotopolymer surfaces for 1 min can be achieved. The transmittance of the VA-LCD photoaligned on the photopolymer surface decreased with increasing UV exposure time. We suggest that the decrease of transmittance in the VA-LCD photoaligned on the photopolymer surface is attributed to the dissociation of the ester linkage in the photodimerized cinnamate structure with increasing UV exposure time

• 한국응용과학기술학회지
• /
• 제14권3호
• /
• pp.39-46
• /
• 1997

Ultraviolet spectrophotometric investigation has been carried out on the rate constants for 1,3-dipolar cycloaddition of 4-substituted-3-phenyloxadiazole derivatives with dipolarophiles such as phenyl acetylene, propiolic acid methyl ester and dimethylacetylene dicarboxylate. From there, the rate constants for 1,3-dipolar cycloaddition were determined at 80, 100 and $120^{\circ}C$, and the reaction rates were increased with increasing temperature. From these rate constants, the values of the thermodynamic activation parameters were obtained. Some thermodynamic activation parameters such as $E_{\alpha}$, ${\Delta}H^{\ast}$, ${\Delta}S^{\ast}$ and ${\Delta}G^{\ast}$ from Arrhenius equation were also calculated for the electrophilic 1,3-dipolar cycloaddition of 3-phenyloxadiazole derivatives with dipolarophiles. In order to the proposal the mechanism and reactivity of 1,3-dipolar cycloaddition reaction, the effect of substituents having various kinds of electron withdrawing or releasing groups were examinated. Considering the effect of substituents, an electron withdrawing group attached at the 4-carbon position in 3-phenyloxadiazole derivatives decreases the reaction rate because of the lack of electron density in 3-phenyloxadiazole ring.

• 분석과학
• /
• 제19권1호
• /
• pp.86-95
• /
• 2006

현재 가동 중인 생활폐기물 소각시설에서 배출되는 소각재의 수세처리에 의한 유기화학물질 용출특성을 확인하기 위해 GC/MSD로 정성 분석을 하였다. 바닥재 및 비산재에서 각각 44종 및 17종의 다양한 유기화합물질을 확인하였다. 이러한 정성분석은 각 피크의 질량스펙트럼에 대한 Library(NIST21, NIST107, WILEY229) 검색 후 일치도가 90% 이상인 유사지표(similarity index)에 의해 수행되었다. 바닥재는 Naphthalene 그리고 Phenanthrene인 2종의 다방향족화합물(Polycyclic Aromatic Hydrocarbons, PAHs)을 포함한 18종의 방향족화합물과 사슬모양의 탄화수소인 26종의 지방족화합물을 검출하였다. 비산재의 경우 잔류성유기오염물질(Persistent Organic Pollutants, POPs)인 헥사클로로벤젠(Hexachlorobenzene, HCB)을 포함한 10종의 방향족화합물과 7종의 지방족화합물을 정성적으로 확인하였다. 또한, 바닥재와 비산재의 용출액과 용출잔사의 용출특성을 비교분석한 결과, 바닥재에서는 Ethenylbenzene, Benzaldehyde, 1-Phenyl-ethanone 그리고 1,4-Benzenedicarboxylic acid dimethyl ester 등이, 비산재에서는 Naphthalene, Dodecane, 1,2,3,5-Tetrachlorobenzene, Tetradecane, Hexadecane 그리고 Pentachlorobenzene등의 유기화합물이 수층으로 용출되는 결과를 얻었다. 따라서 소각재 중 비산재 및 바닥재가 단순 매립될 경우 유기화합물에 의한 침출수 및 지하수, 토양 등 2차 오염이 발생할 것으로 추정되며, 이러한 2차 오염을 방지하기 위해서 소각재에 함유되어 있는 다양한 종류의 유기화학물질의 용출특성을 조사하여 이에 대한 효율적이고 적정한 관리가 이루어져야 할 것으로 판단된다.

• 동아시아식생활학회지
• /
• 제23권4호
• /
• pp.451-460
• /
• 2013

The purpose of this study is to investigate the volatile compounds of Korean traditional gochujang from various districts. The volatiles from each traditional gochujang are being extracted by simultaneous steam distillation extraction (SDE), and analyzed by gas chromatography (GC) and gas chromatography/mass spectrometry (GC/MS). Twenty compounds are identified as major volatile components which include 8 esters, 4 alcohols and 4 acids. The most traditional gochujang possesses more volatile components rather than commercial gochujang products. Most acids come from fatty acids and the alcohols derive from the oxidative degradation of linolenic acid. The most abundant volatile compounds for both traditional and commercial gochujang include 10 compounds such as 2-methyl-1-propanol, hexanal, 2-methyl-1-butanol, octanoic acid ethyl ester, as well as the various type of acids and esters. They represent most of the total GC peak areas, respectively. From the results, the characteristics of the flavors for traditional gochujang from each district are not clear but have shown various components than the commercial products.

• 한국의류산업학회지
• /
• 제14권4호
• /
• pp.677-683
• /
• 2012

1-octanethiol and vinyl acetate telomers ($R_8S$-nVAc) were synthesized and hydrolyzed with sodium hydroxide subsequently, 1.2-epoxyhexane was then introduced to the telomers. In addition, we prepared cotelomers of multi-alkylated nonionic surfactants with a molecular structure of xRnMA-yVA (x; hydrophobic group, y; hydrophilic group, MA; methacrylic ester, VA; vinyl alcohol, R; and alkyl group) and cross-linked with sodium tetraborate decahydrate. Their active surface properties were investigated by several techniques such as surface tension, foaming property, and emulsification power measurements. The surface tension of $R_8S$-8.8VA decreased without the introduction of 1.2-Epoxy hexane, and the degree of emulsification and foaming abilities of $R_8S$-8.8VA increased without the introduction of 1.2-Epoxy hexane. However, the differences were insignificant. The epoxy groups were attached to a $R_8S$-8.8VA cotelomer with a limited variation of the active surface properties. The surface tension of $1.1R_6MA$-8.8VA decreased after cross-linking subsequently, the degree of emulsification and foaming abilities of $1.1R_6MA$-8.8VA increased after cross-linking. However, there was no clear difference between them. The B-O bonds were attached to a $1.1R_6MA$-8.8VA cotelomer with a limited variation of the active surface properties.

• Bulletin of the Korean Chemical Society
• /
• 제35권5호
• /
• pp.1356-1364
• /
• 2014

A new conjugated copolymer, poly{4,8-bis(triisopropylsilylethynyl)benzo[1,2-b:4,5-b']dithiophene-alt-4,7- bis(5-thiophen-2-yl)-5,6-difluoro-2-(heptadecan-9-yl)-2H-benzo[d][1,2,3]triazole} (PTIPSBDT-DFDTBTz), is synthesized by Stille coupling polycondensation. The synthesized polymer has a band gap energy of 1.9 eV, and it absorbs light in the range 300-610 nm. The hole mobility of a solution-processed organic thin-film transistor fabricated using PTIPSBDT-DFDTBTz is $3.8{\times}10^{-3}cm^2V^{-1}s^{-1}$. Bulk heterojunction photovoltaic cells are fabricated, with a conventional device structure of ITO/PEDOT:PSS/polymer:$PC_{71}BM$/Ca/Al ($PC_{71}BM$ = [6,6]-phenyl-$C_{71}$-butyric acid methyl ester); the device shows a power conversion efficiency (PCE) of 2.86% with an open-circuit voltage ($V_{oc}$) of 0.85 V, a short-circuit current density ($J_{sc}$) of 7.60 mA $cm^{-2}$, and a fill factor (FF) of 0.44. Inverted photovoltaic cells with the structure ITO/ethoxylated polyethlyenimine/ polymer:$PC_{71}BM/MoO_3$/Ag are also fabricated; the device exhibits a maximum PCE of 2.92%, with a $V_{oc}$ of 0.89 V, a $J_{sc}$ of 6.81 mA $cm^{-2}$, and an FF of 0.48.