• 한국해양공학회지
• /
• 제11권2호
• /
• pp.131-137
• /
• 1997

The technology of small and medium sized shipbuilding companies is lower relatively to major shipbuilding companies, and should be up-graded from the viewpoint of national economic development. In spite that hul form design is one of the most important elements with respect to shipbuilding technology, small and medium sized shipbuilding companies are incapable of developing hull form. Inorder to support technically such companies hull form development was carried out for G/T 999ton class tanker and D/W 4990ton class tanker which are the typical vessels operating in coastal area. The operating efficiency for the developed hull forms are impeoved by 30% for G/T 999ton class tanker and 24% for D/W 4990 tonclass tanker respectively. The results of hull form development including ship model test and performance analysis are presented in this paper.

• 수산해양기술연구
• /
• 제44권1호
• /
• pp.68-74
• /
• 2008

This study is concerned with the development of the basic planing hull form of small fishing boat in 25 knots high speed. A series of model test to determine the optimum performance hull form of actual fishing boat with 10 gross tonnage was carried out for 5 models made available planing hull form in the circulation water channel. Model test was performed with the resistance test to study the hydrodynamic characteristics of model ships and the sinkage and trim measurement to investigate the stability of model ships and also the wave pattern observation to analyze the effectiveness of model ships. As the result, the planing hull form of P-4 with deep V type bow can be derived as the best hull form with good performance especially in ship's resistance efficiency showing less residual resistance and sinkage and trim and the spray effect, etc..

• 한국해양공학회지
• /
• 제11권4호
• /
• pp.221-226
• /
• 1997

This study was carried out for the hull form development of G/T 340ton class high speed fishery patrol ship by Chosun University at the Circulating Water Channel cooperatively with Korea Maritime Service. Same size of 15knots class fishery patrol ship was selected as a parent form (Model number : CU-015), and modified fore and after body to be suitable for the operation at 20 knots. To minimize the breaking wave in the vicinity of fore body at high speed zone, high bulb nose and slender fore body hull form was chosen as an initial condition. Meanwhile, to ensure the engine room space keeping high resistance-propulsion performance, U-type stern hull form was developed.

• Selected Papers of The Society of Naval Architects of Korea
• /
• 제1권1호
• /
• pp.65-75
• /
• 1993

Hull form development for an AFRAMAX tanker characterized by the form parameters of $C_B\simeq0.8$, $L/B\simeq5.5$, $B/T\simeq3.5$, han been carried out by the application of ‘Composite Stern Frameline Concept’. The viscous resistance of the new form was much smaller than that of the conventional form. Form factor of the new form was only 0.18 compared to 0.30 for the conventional hull form, Nevertheless the propulsive efficiency was slightly lower and thus the required propulsion power was smaller by 5~6% at both full load and ballast condition. In addition, it is confirmed that introduction of the form factor method such as ITTC’78 method is highly advisable because there is a great risk of the underperdicting full scale resistance of the hull form whose form the extrapolation of moel resistance to full scale is to be based on Froude method with the correlation allowances usually applied to conventional hull forms.

• 한국항해학회지
• /
• 제21권2호
• /
• pp.41-46
• /
• 1997

In this paper, important parameters of fast catamaran hull form are investigated. Praticularly, length-displacement ratio, demihull spacing, trim and hull form on resistance performance are analyzed. Also, the usefulness of SHIPFLOW program for hull form development is studied. The computed results by using SHIPFLOW program are compared with experimental results in model test.

• 대한조선학회논문집
• /
• 제49권5호
• /
• pp.367-375
• /
• 2012

In this study, hull form of main vessel of Korean large purse seiner fishing industry is developed for the improvement of resistance performance as well as for the satisfaction to the Standard of Fishing Convention, ILO. Through the modification of reference hull form parameters and local characteristics, the hull form development is carried out. The optimum hull form parameters are searched by Sequential Quadratic Programing(SQP) method with the power estimation method of Holtrop & Mannen. To minimize the wave resistance, bulbous bow parameters are determined by the bulbous bow design method of Alvarino. The plasmatic curve is redesigned from that of the reference hull by using Lackenby method. The resistance performances of the reference and designed hull forms are estimated by using numerical simulation method. Also, the judgment of seakeeping ability and the estimation of intact stability for the designed hull form is carried out. As a result, the optimum hull form is proposed. To verify the improvement of resistance performance, model tests are carried out in towing tank. The results show that the resistance of the designed hull form is about 14% smaller than that of the reference hull from at design speed. A new hull form proposed in this study can contribute to the development of the main vessel hull form of Korean large purse seiner fishing system.

• 대한조선학회논문집
• /
• 제40권4호
• /
• pp.1-7
• /
• 2003

Large Passenger Ferry has been delivered with a tendency of high speed since 1990´s. More than 50 ferries that exceed 25 knots in service speed are operating or under construction these days. Therefore, the hull form development for the large size ferry should be carefully carried out with some design points such as high service speed, severe criteria for stability, and complex design of appendages. This paper reviewed principal particulars and hull form characteristics of a high-speed large passenger ferry. It is also suggested the optimization method of hull form and appendages in point of resistance & propulsion performance. Finally, it is also introduced a high-speed large passenger ferry developed by Samsung Heavy Industries Co., Ltd., the key design points in hull form development.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권4호
• /
• pp.508-519
• /
• 2018

In order to design the hull form of an underwater vehicle in the conceptual design phase, the dynamic characteristics depending on the hull form parameters should be identified. Course-keeping stability, turning ability, yaw-checking ability, and mission competence are set to be the indices of the dynamic characteristics, and the geometric parameters for the bare hull and rudder are set to be the hull form design parameters. The total sensitivity of the dynamic characteristics with respect to the hull form parameters is calculated by the chain rule of the partial sensitivity of the dynamic characteristics with respect to the hydrodynamic coefficients, and the partial sensitivity of the hydrodynamic coefficients with respect to the hull form parameters. Based on the sensitivity analysis, important hull form parameters are selected, and those optimal values to satisfy the required intercept time of mission competence of a specific underwater vehicle and turning rate are estimated.

• 한국해양공학회지
• /
• 제29권6호
• /
• pp.405-410
• /
• 2015

This paper reports the hull form development and resistance performance of a 5-ton-class catamaran-type coastal fishing boat. The weight estimation and preliminary design were basically extracted from existing coastal fishing vessels. In addition, the resistance performance was investigated using a model test in a high-speed circulating water channel and was analyzed in comparison to an existing catamaran fishing vessel. As a result, the modified hull achieved an approximately 30% reduction in resistance compared to the previous hull. The stability or boarding sensitivity of the modified hull form was more stable or comfortable than the original hull form based on a trim and sinkage comparison between the two boats.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.53-59
• /
• 2001

In this Paper, the resistance performances of twin hull forms, which are simplified as two-dimensional wedge shape, are experimentally investigated in low and middle speed ranges to find out the effect of distance between two hulls and fore-body shape for the future hull form development of catamaran type sweeping vessel. The model tests are performed for seven different cases for three models in the circulating water channel(CWC) of Inha Technical College. The free surface flows are observed together to investigate the relation between resistance performance and free surface characteristics. A conceptual design for the modification of bow hull form is presented and the efficiency is discussed.