Browse > Article
http://dx.doi.org/10.1016/j.ijnaoe.2017.10.010

Analysis of the dynamic characteristics for the change of design parameters of an underwater vehicle using sensitivity analysis  

Jeon, Myungjun (Changwon National University)
Yoon, Hyeon Kyu (Changwon National University)
Hwang, Junho (Agency for Defense Development)
Cho, Hyeon Jin (Agency for Defense Development)
Publication Information
International Journal of Naval Architecture and Ocean Engineering / v.10, no.4, 2018 , pp. 508-519 More about this Journal
Abstract
In order to design the hull form of an underwater vehicle in the conceptual design phase, the dynamic characteristics depending on the hull form parameters should be identified. Course-keeping stability, turning ability, yaw-checking ability, and mission competence are set to be the indices of the dynamic characteristics, and the geometric parameters for the bare hull and rudder are set to be the hull form design parameters. The total sensitivity of the dynamic characteristics with respect to the hull form parameters is calculated by the chain rule of the partial sensitivity of the dynamic characteristics with respect to the hydrodynamic coefficients, and the partial sensitivity of the hydrodynamic coefficients with respect to the hull form parameters. Based on the sensitivity analysis, important hull form parameters are selected, and those optimal values to satisfy the required intercept time of mission competence of a specific underwater vehicle and turning rate are estimated.
Keywords
Underwater vehicle; Sensitivity analysis; Dynamic characteristics; Hydrodynamic coefficient; Hull form parameter; Optimal design;
Citations & Related Records
Times Cited By KSCI : 7  (Citation Analysis)
연도 인용수 순위
1 Yoon, H.K., Ahn, J.H., Son, N.S., 2006. Establishment of hydrodynamic force and moment model by using system identification method and neural networks. In: International Conference on Marine Research and Transportation. Italy.
2 Ahn, J.H., 2005. Study on the Collision Avoidance of a Ship Using Neuro-fuzzy Technique. Ph.D Thesis. Dept of Naval Architecture and Ocean Engineering, Seoul National University.
3 Bae, J.Y., Sohn, K.H., Kwon, H.K., Lee, S.K., 2007. A study on changes in appendage design for improvement of dynamic stability of Manta-type unmanned undersea vehicle. J. Soc. Naval Archi. Korea 44 (No.3), 323-331.   DOI
4 Feldman, J., 1979. DTNSRDC Revised Standard Submarine Equations of Motion. DTNSRDC/SPD-0393-09, pp. 4-27.
5 Fossen, T.I., 1994. Guidance and Control of Ocean Vehicles. JOHN WILEY & SONS, pp. 5-56.
6 Gertler, M., Hagen, G.R., 1967. Standard Equations of Motion for Submarine Simulation. DTNSRDC/SR 009 01 01, pp. 4-11.
7 HDW, 2002. Course 14. Manoeuvrability of Submarines. Howaldts werke-Deutsche Werft AG Report.
8 Healey, A.J., Lienard, D., 1993. Multivariable sliding mode control for autonomous diving and steering of unmanned underwater vehicles. IEEE J. Ocean. Eng. 18 (No.3), 327-339.   DOI
9 Jeon, M., Yoon, H.K., Hwang, J., Cho, H.J., 2016. A Study on the Maneuvering Characteristics of Submerged Body by the Change of its Design Parameters. Spring Workshop of the Korea Marine Robot Technology Society, pp. 35-41.
10 Jeon, M., 2017. Hull Optimization for a Submerged Body Using Sensitivity Analysis on its Dynamic Characteristics. MSc. Thesis. Changwon National University.
11 Lewis, E.V., 1989. Principles of Naval Architecture, Volume III e Motions in Waves and Controllability. SNAME, pp. 222-224.
12 Jung, J.W., Jeong, J.H., Kim, I.G., Lee, S.K., 2014a. Estimation of hydrodynamic derivatives of submarine model by using VPMM test. J. Navig. Port Res. 38 (No.2), 97-103.   DOI
13 Jung, J.W., Jeong, J.H., Kim, I.G., Lee, S.K., 2014b. Experimental study on hydrodynamic coefficients of autonomous underwater glider using vertical planar motion mechanism test. J. Ocean Eng. Technol. 28 (No.2), 119-125.   DOI
14 Kim, C.K., 2011. The trend of the development for the underwater vehicle and its technology. In: 2011 Joint Symposium of the Korean Association of Ocean Science and Technology Societies, 469-469.
15 Kim, D.H., Rhee, K.P., Kim, N., 2014. The effect of hull appendages on maneuverability of naval ship by sensitivity analysis. J. Soc. Naval Archi. Korea 51 (No.2), 154-161.   DOI
16 Lewandowski, E., 1991. Tests of a Submarine Model in Coning Motion. Davidson Laboratory Report 2660.
17 Myring, D.F., 1976. A theoretical study of body drag in subcritical axisymmetric flow. Aeronaut. Q. 27 (3), 186-194.   DOI
18 Park, J.Y., Kim, N., Rhee, K.P., Yoon, H.K., Kim, C.K., Jung, C., Ahn, K., Lee, S., 2015. Study on coning motion test for submerged body. J. Ocean Eng. Technol. 29 (No.6), 436-444.   DOI
19 Prestero, T., 2001. Verification of a Six-degree of Freedom Simulation Model for the REMUS Autonomous Underwater Vehicle. MSc. Thesis. MIT, pp. 20-36.
20 Sen, D., 2000. A study on sensitivity of maneuverability performance on the hydrodynamic coefficients for submerged bodies. J. Ship Res. 44 (No.3), 186-196.
21 Yeo, D.J., Rhee, K.P., 2006. Design of sensitivity-maximizing input for submarines' manoeuvring coefficients using genetic algorithm technique. J. Soc. Naval Archi. Korea 43 (No.2), 156-163.   DOI
22 Yeo, D.J., Yoon, H.K., Kim, Y.G., Lee, C.M., 2006. Sensitivity analysis on the stability of a submarine concerning its design parameters. J. Soc. Naval Archi. Korea 43 (No.4), 521-528.   DOI