• Title/Summary/Keyword: Hopping Method

Search Result 157, Processing Time 0.026 seconds

Performance of a Coded Frequency Hopping OFDMA System with an Iterative Receiver in Uplink Cellular Environments (상향 링크 셀룰러 환경에서 반복 수신 기법을 적용한 부호화된 주파수 도약 OFDMA 시스템의 성능)

  • Kim, Yun-Hee;Kang, Sung-Kyo
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.30 no.11C
    • /
    • pp.1108-1115
    • /
    • 2005
  • In this paper, we propose a practical iterative channel estimation and decoding method for an LDPC-coded frequency hopping OFDMA system in the uplink of a packet-based cellular system. In the method, the channel gain and noise variance are iteratively estimated with both pilot symbols and LDPC decoder outputs to provide more reliable decoding metrics in intercell interference (ICI) environments. In addition, the channel correlation coefficient is also estimated to select proper filter coefficients according to the channel variation rate. Through simulations under the various channel conditions and different receiver configurations, it is shown that the proposed iterative receiver improves the performance without boosting the pilot power and mitigates the adverse effects of the non-uniform ICI.

A study on the fast frequency hopping spread-spectrum(FFH-SS) Communication system using Digital Frequency Synthesizer Technique (디지틀 주파수 합성 기법에 의한 FFH-SS 통신 방식에 관한 연구)

  • 김원후;전계석
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.12 no.2
    • /
    • pp.168-175
    • /
    • 1987
  • In this paper, a FFH-SS hybrid communication method using digital frequency synthesizer is proposed. This can simultaneously share the same frequency band with conventional band limited communication method without interference. In the experiment the selective hopping pattern is attained by some conbination of serial to parallel conversion of maximal code from pseudo random noise generater, and it is observed that the selective hopping band transition can be more easily achieved when the hop interval is nonuniform than it is uniform. Digital frequency synthesizer is now reported to have very poor spurious suppression ability below 50~60dB, the reason of this is observed from the experimental result, and the way of how to solve this problem is presneted.

  • PDF

Interference Analysis based on the Monte-Carlo Method (Monte-Carlo 기반의 간섭분석에 관한 연구)

  • Kim, Seong-Kweon
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.3 no.2
    • /
    • pp.58-64
    • /
    • 2008
  • In this paper, we proposed the methodology of interference analysis based on monte-carlo method for effective use of Industrial, Scientific, Medical (ISM) band. The interference scenario is divided according to the distance and density. The simulation of interference analysis evaluates the interference probability according to distribution density of Interfering Transmitters (It) in the Secure Interference Area (SIA). The SIA is gained from the Interference Efficiency Range that satisfied to Interference Permissible Range of Victim Receiver (Vr). Simulation result that apply the proposed interference scenario to the WLAN and bluetooth, Interference Permissible Range was 60~400m. And the WLAN was acceptable within interference permissible range to six bluetooth that exist in the SIA. In the same condition, when applied Listen Before Talk (LBT) based on Cognitive Radio (CR) to the bluetooth using Frequency Hopping (FH), interference probability was decreased sharply. The Spectrum Engineering Advanced Monte Carlo Analysis Tool (SEAMCAT) that has been developed based on the monte-carlo method by European Radio-communications Office (ERO) were used to the interference simulation.

  • PDF

A Design of X band Frequency Hopping Synthesizer using DDS Spurious Reduction Method (DDS 불요파 제거 알고리즘을 이용한 X 대역 주파수 도약 합성기 설계)

  • Kwon, Kun-Sup
    • Journal of the Korea Institute of Military Science and Technology
    • /
    • v.13 no.5
    • /
    • pp.775-784
    • /
    • 2010
  • In this paper we propose a design method of X band frequency hopping synthesizer in terms of phase noise and settling time with DDS driven PLL architecture, which has the advantages of high frequency resolution, fast settling time and small size. In addition, a noble method is proposed to remove the synthesizer output spurious signals due to superposition effect of DDS. The spurious signal which depend on its normalized frequency of DDS, can be dominant if they occur within the PLL loop bandwidth. We verify that the sources of that spurious signals are quasi-amplitude modulation and superposition effect, and suggest that such signals can be eliminated by intentionally creating frequency errors in the developed synthesizer.

Performance Analysis of Modulator using Direct Digital Frequency Synthesizer of Initial Clock Accumulating Method (클록 초기치 누적방식의 직접 디지털 주파수 합성기를 이용한 변조기의 성능해석)

  • 최승덕;김경태
    • Journal of the Korean Institute of Telematics and Electronics T
    • /
    • v.35T no.3
    • /
    • pp.128-133
    • /
    • 1998
  • This paper is study on performance analysis of modulator using direct digital frequency synthesizer of Initial Clock Accumulating Method. It has been generally used for PLL or digital frequency synthesizing method to be synthesizd randomly chosen frequency state. In order to improve disadvantage of two methods, we constructed modulator system using DDFS of Initial Clock Accumulating Method. We also confirmed the coherence frequency hopping state and possibility of phase control. The results obtained from the experiments are as follows; First, the synthesized output frequency is proportional to the sampling frequency, according to index, K. Second, the difference of the gain between the basic frequency and the harmonic frequencies was more than 50 [dB], that is, this means facts that is reduced the harmonic frequency factor. Third, coherence frequency hopping state is confirmed by PN code sequence. Here, we confirmed the proposed method cut switching time, this verify facts that is the best characteristic of the frequency hopping. We also verified the fact that the phase varies as the adder is operated set or reset.

  • PDF

Performance Analysis of Block Interleaver by Using Hopping Method (호핑 방식을 이용한 블록 인터리버의 성능 분석)

  • Gong, Hyeong-Yun;U, Il-Seung
    • The KIPS Transactions:PartC
    • /
    • v.8C no.2
    • /
    • pp.207-212
    • /
    • 2001
  • 본 논문에서는 호핑 방식을 사용한 블록 인터리버에 대해 연구하였다, 인터리버의 성능은 인접 데이터간 최소 거리에 이해 결정되어지므로, 인접 데이터간 최소 거리를 증가시키는 방법으로 인터리버의 성능을 향상 시켰다. 기존의 블록 인터리버는 메모리의 입/출력이 행과 열에 대해 차례대로 이루어지는 반면, 본 연구에서 제안된 방식은 행과 열을 건너뛰면서 입/출력이 이루어지므로 인접 데이터간 최소거리와 평균거리를 증가시킨다. 제안하는 인터리버의 또 다른 장점으로는 다양한 호핑 방식의 사용이 가능하다는 것이다. 제안된 인터리버의 성능 분석과 비교를 위해 가우시안 잡음 환경 하에서 컴퓨터 모의 실험을 하였다.

  • PDF

An SDN based hopping multicast communication against DoS attack

  • Zhao, Zheng;Liu, Fenlin;Gong, Daofu
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.11 no.4
    • /
    • pp.2196-2218
    • /
    • 2017
  • Multicast communication has been widely used in the Internet. However, multicast communication is vulnerable to DoS attack due to static router configuration. In this paper, HMC, a hopping multicast communication method based on SDN, is proposed to tackle this problem. HMC changes the multicast tree periodically and makes it difficult for the attackers to launch an accurate attack. It also decreases the probability of multicast communication being attacked by DoS and in the meanwhile, the QoS constrains are not violated. In this research, the routing problem of HMC is proven to be NP-complete and a heuristic algorithm is proposed to solve it. Experiments show that HMC has the ability to resist DoS attack on multicast route effectively. Theoretically, the multicast compromised probability can drop more than 0.6 when HMC is adopt. In addition, experiments demonstrate that HMC achieves shorter average multicast delay and better robustness compared with traditional method, and more importantly, it better defends DoS attack.

Frequency-Domain RLS Algorithm Based on the Block Processing Technique (블록 프로세싱 기법을 이용한 주파수 영역에서의 회귀 최소 자승 알고리듬)

  • 박부견;김동규;박원석
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 2000.10a
    • /
    • pp.240-240
    • /
    • 2000
  • This paper presents two algorithms based on the concept of the frequency domain adaptive filter(FDAF). First the frequency domain recursive least squares(FRLS) algorithm with the overlap-save filtering technique is introduced. This minimizes the sum of exponentially weighted square errors in the frequency domain. To eliminate discrepancies between the linear convolution and the circular convolution, the overlap-save method is utilized. Second, the sliding method of data blocks is studied Co overcome processing delays and complexity roads of the FRLS algorithm. The size of the extended data block is twice as long as the filter tap length. It is possible to slide the data block variously by the adjustable hopping index. By selecting the hopping index appropriately, we can take a trade-off between the convergence rate and the computational complexity. When the input signal is highly correlated and the length of the target FIR filter is huge, the FRLS algorithm based on the block processing technique has good performances in the convergence rate and the computational complexity.

  • PDF

High speed matched filter synchronization circuit applied in frequency hopping FSK Transceiver (주파수도약 대역 확산 FSK 수신기의 고속 정합여파기 동기회로)

  • Kim, Seong-Cheol
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.13 no.8
    • /
    • pp.1543-1548
    • /
    • 2009
  • In this paper, a high speed code synchronization circuit is proposed. for fast code synchronization, matched filler method is used for initial code acquisition with two channel correlators. Particular frequency patterns of the limited number having the information about PN code start time are composed and transmitted repeatedly to increase the probability of accurate initial synchronization. And digital frequency synthesizer is proposed. And it's performance is analyzed theoretically. The analysis show that fast frequency hopping is possible in frequency hopping system that use digital frequency synthesizer.

AJ Performance of the FH-CSS(Frequency Hopped - Chirp Spread Spectrum) Communication Systems (NED를 사용하는 FH-CSS(Frequency Hopped - Chirp Spread Spectrum)의 항 재밍 성능 분석)

  • Kim, Sung-Ho;Kim, Young-Jae;Hwang, Seok-Gu;Jo, Byoung-Gak;Shin, Kwan-Ho;Kim, Nam
    • Journal of the Korea Institute of Military Science and Technology
    • /
    • v.14 no.1
    • /
    • pp.69-73
    • /
    • 2011
  • In the defence wireless communications, conventional Anti-Jamming techniques(Frequency Hopping/Spread Spectrum or Direct Sequence/Spread Spectrum) are used to overcome a intentional interfering signals which are single/multitone or partial band jammer etc. DS/SS techniques is very strong on tone jamming signal but not to be on a partial band jammer. So FH/SS AJ performances are expected method of an substitution of DS/SS, however FH/SS could not have good performance on some BMTJ(Band Multi-tone Jammer). So this paper proposes FH-CSS (Frequency Hopped - Chirp Spread Spectrum) to get more robustness against jammers(BMTJ, PBNJ) and analyze the AJ performances.