• 공업화학
• /
• 제23권2호
• /
• pp.222-227
• /
• 2012

본 연구에서는 마디풀 추출물의 에틸아세테이트 분획을 함유한 안정한 나노에멀젼을 제조하였고, 이 나노에멀젼의 피부 흡수 증진 효과를 평가하였다. 나노에멀젼은 균질기(homogenizer) 처리 후 고압유화기(microfluidizer)를 이용한 고에너지법으로 제조하였다. 마디풀 추출물의 에틸아세테이트 분획을 함유한 나노에멀젼의 입자 크기와 포집효율을 측정하였다. 평균 입자 크기는 238 nm이었으며 포집 효율은 98% 이상으로 나타났다. 나노에멀젼은 단분산의 입도 분포를 나타냈으며 고압 유화 과정을 거치지 않은 일반 에멀젼보다도 더 안정함을 보여주었다. Franz diffusion cell을 이용하여 마디풀 추출물의 에틸아세테이트 분획을 함유한 나노에멀젼의 피부 투과 실험을 수행하였다. 에틸아세테이트 분획 함유 나노에멀젼은 대조군인 1,3-butylene glycol 용액에서 보다 피부 흡수 및 투과량이 더 큰 것으로 나타났다. 이상의 연구 결과들은 항산화 및 항노화 활성이 큰 마디풀 추출물의 에틸아세테이트 분획을 함유한 나노에멀젼이 안정성 및 피부 투과력이 우수함을 시사한다.

• 한국응용과학기술학회지
• /
• 제38권3호
• /
• pp.801-812
• /
• 2021

바이오틴을 피부에 전달하기 위해 고압균질기를 사용하여 바이오틴과 세라마이드를 모두 함유하는 에토좀에 대하여 연구하였다. 바이오틴이 주된 성분으로 사용되었으며, 세라마이드 NP는 인지질 이중층의 지지체로 활용되었다. 바이오틴은 수용성 내부에 포획되었고, 세라마이드 NP는 에토좀의 이중층에 흡착되었다. 세라마이드 NP를 함유한 에토좀의 물성을 살펴보면 소포체의 크기는 80~130 nm, 다분산지수는 0.09~0.16, 제타 전위는 -40~-49 mV로 측정되었다. 세라마이드 NP가 없는 소포체의 크기는 124.80±1.46 nm, 다분산지수와 제타전위는 각각 0.088±0.018과 -45.48±1.27 mV이었다. 따라서 세라마이드 NP가 함유된 에토좀은 세라마이드 NP가 없는 에토좀에 비해 소포체의 물리적 특성이 개선됨을 알 수 있었다. 세라마이드 NP를 함유한 에토좀의 피부흡수율은 12시간 후 6.13~14.98%이었으며, 반면에 세라마이드 NP가 없는 에토좀의 피부흡수율은 7.08%이었다. 결론적으로 세라마이드 NP를 함유한 에토좀은 피부흡수 효율을 향상시킬뿐만 아니라 소포체의 안정성에도 긍정적인 영향을 미쳤다.

• Archives of Pharmacal Research
• /
• 제20권5호
• /
• pp.480-485
• /
• 1997

The absorption profile of phenytoin Na emulsion were examined compared to that of phenytoin suspension after oral administration in the rat. The corn oil-in-water emulsion, particle size of $184{\pm}$57.8 nm, was prepared using a microfludizer, and phenytoin Na added by shaft homogenizer. The phenytoin emulsion or suspension, 100 mg/kg, were intubated intragastrically using oral dosing needle and blood samples were withdrawn via an indwelling cannula from the conscious rat. Plasma concentrations of phenytoin were measured with HPLC using phenacetin as an internal standard. The plasma concentration versus time data were fitted to a one compartment open model and the pharmacokinetic parameters were calculated using the computer program, Boomer. The phenytoin plasma concentrations from the emulsion at each observed time were about 1.5-2 times higher than those from the suspension, significantly at time of 5, 6 and 7 hr after administration. The absorption $(k_a)$ and elimination rate constant $(k_e)$ were not altered significantly, however the AUC increased from 65.6 to $106.7{\mu}ghr/ml$ after phenytoin suspension or emulsion oral administration, respectively. From an equilibrium dialysis study, the diffusion rate constant $(k_{IE})$ was considerably higher from the phenytoin Na emulsion $(0.0439 hr{-1})$ than phenytoin suspension $(0.0014 hr{-1})$.

• Food Science and Biotechnology
• /
• 제17권2호
• /
• pp.324-329
• /
• 2008

The effect of ultra-high pressure homogenization on the emulsifying properties of whey protein was investigated in a model emulsion made with whey protein isolate and soya oil under various pH. The emulsifying properties, the average diameter of the oil droplets ($d_{vs}$), and the protein load, were measured for each emulsion produced at different homogenization pressures (50 to 200 MPa) and pH values (4.6 to 8.0). According to the results of variance analysis and response surface, the pH had more influence on oil droplet size and protein load than homogenization pressure. The model equations, which were obtained by response surface analysis, show that pH and homogenization pressure had the major effect on oil droplet size and protein load. Higher homogenization pressure decreased the average droplet size and the protein load. Homogenization at high pressure, as opposed to low pressure, causes no overprocessing, but the effect was pH-dependent. The average diameter of the oil droplets increased slightly by decreasing the pH from 8.0 to 6.5 and then increased dramatically toward the isoelectric point of whey protein (i.e., at pH 4.6). Moreover associated droplets were found at acidic pH and their size was increased at high temperature.

• International Journal of Aeronautical and Space Sciences
• /
• 제14권2호
• /
• pp.140-145
• /
• 2013

The development of high performance fabrics have advanced body armor technology and improved ballistic performance while maintaining flexibility. Utilization of the shear thickening phenomenon exhibited by Shear Thickening Fluids (STF) has allowed further enhancement without hindering flexibility of the fabric through a process of impregnation. The effect of STF impregnation on the ballistic performance of fabrics has been studied for impact velocities below 700 m/s. Studies of STF-impregnated fabrics for high velocity impacts, which would provide a transition to significantly higher velocity ranges, are lacking. This study aims to investigate the effect of STF impregnation on the high velocity impact characteristics of Kevlar fabric by effectively dispersing silica nanoparticles in a suspension, impregnating Kevlar fabrics, and performing high velocity impact experiments with projectile velocities in the range of 1 km/s to compare the post impact characteristics between neat Kevlar and impregnated Kevlar fabrics. 100 nm diameter silica nanoparticles were dispersed using a homogenizer and sonicator in a solution of polyethylene glycol (PEG) and diluted with methanol for effective impregnation to Kevlar fabric, and the methanol was evaporated in a heat oven. High velocity impact of STF-impregnated Kevlar fabric revealed differences in the post impact rear formation compared to neat Kevlar.

• 한국재료학회지
• /
• 제18권11호
• /
• pp.610-616
• /
• 2008

Oil-based nanofluids were prepared by dispersing Ag, graphite and carbon black nanoparticles in lubricating oil. Agglomerated nanoparticles were dispersed evenly with a high-speed bead mill and/or ultrasonic homogenizer, and the surfaces of the nanoparticles were modified simultaneously with several dispersants. Their tribological behaviors were evaluated with a pin-on-disk, disk-on-disk and four-ball EP and wear tester. It is obvious that the optimal combination of nanoparticles, surfactants and surface modification process is very important for the dispersity of nanofluids, and it eventually affects the tribological properties as a controlling factor. Results indicate that a relatively larger size and higher concentration of nanoparticles lead to better load-carrying capacity. In contrast, the use of a smaller size and lower concentration of particles is recommended for reducing the friction coefficient of lubricating oil. Moreover, nanofluids with mixed nanoparticles of Ag and graphite are more suitable for the improvement of load-carrying capacity and antiwear properties.

• 한국재료학회지
• /
• 제28권6호
• /
• pp.337-342
• /
• 2018

Using a high pressure homonizer, we report on the electrochemical performance of $Li_4Ti_5O_{12}(LTO)$ particles manufactured as anode active material for lithium ion battery. High-pressure synthesis processing is performed under conditions in which the mole fraction of Li/Ti is 0.9, the synthesis pressure is 2,000 bar and the numbers of passings-through are 5, 7 and 10. The observed X-ray diffraction patterns show that pure LTO is manufactured when the number of passings-through is 10. It is found from scanning electron microscopy analysis that the average size of synthesized particles decreases as the number of passings-through increases. $LiCoO_2-based$ active cathode materials are used to fabricate several coin half/full cells and their battery characteristics such as lifetime, rate capability and charge transfer resistance are then estimated, revealing quite good electrochemical performance of the LTO particles as an effective anode active material for lithium secondary batteries.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.201-201
• /
• 2013

ITO는 투명하면서도 전도성이 매우 높은 물질로 디스플레이 분야에서 전극으로 많이 사용된다. 하지만 ITO는 세라믹 물질이기 때문에 공정 단가가 높고, 유연성이 낮아 구부릴 경우 전도성이 파괴되며 충격에도 약하여 flexible한 소자에 적용할 수 없다. 또한 metal diffusion이 잘 일어나는 물질이기 때문에 OLED 소자의 특성을 저해한다. 이와 같은 문제점을 해결하기 위해 ITO를 대체하여 graphene을 이용한 투명전극 연구개발이 활발히 진행되고 있다. Graphene은 높은 mobility와 전도도를 가지고 있으며, 높은 열전도성, Young's modulus, 그리고 mechanical flexibility를 가진 물질이다. 최근에 이러한 장점들로 인해 ITO를 대체하는 물질로서 각광을 받고 있지만 graphene은 Cu, Ni과 같은 금속표면에 한정되어 성장하는 문제점을 가지고 있다. 이 graphene 합성방법은 전사과정을 필요로 하며, 이로 인해 낮은 생산성과 낮은 수율을 야기한다. 최근 높은 생산성을 가지는 graphene 전극을 만들기 위해 Reduced Graphene Oxide (rGO) 연구가 활발히 진행되고 있다. 그러나 rGO는 산화환원 과정에서 전기전도도와 electron mobility가 완벽히 회복되지 못한다는 문제점을 가지고 있다. 그리하여 본 연구에서는 높은 투과도와 높은 전도도를 갖는 graphene 전극을 얻기 위해서 powdered graphene flake를 사용하였다. Graphene flake를 IPA solvent에 분산시키기 위해 sonicator과 homogenizer를 이용하여 Graphene flake solution을 제작하였다. 그리고 uniform한 전극을 만들기 위해 Spray Coating 방법을 이용하여 PET 기판 위에 graphene flake를 증착시켰다. graphene flake를 이용하여 높은 투과도와 낮은 면저항을 갖는 투명전극을 제작하고, 그 특성을 UV-visible spectrophotometer과 four point probe를 이용하여 확인하였다.

• 한국응용과학기술학회지
• /
• 제23권1호
• /
• pp.1-11
• /
• 2006

The W/O emulsion was formed by mixing hydrophobic nonion surfactants of span 80 and tween 60 with kerosine, and by adding sodium silicate aqueous solution. Precipitating the W/O emulsion by sodium bicarbonate resulted in spherical silica particles. Shape and size distribution of silica particles were observed. The particles were spherical and they have narrow size distribution. Particle sizes were 9.29, 7.39 and $5.73\;{\mu}m$ at homogenizer speed of 2500, 3000, and 3500 rpm, respectively. The particle size was decreased by increasing agitation speed due to the formation of emulsion droplet. At fixed agitation speed, absorbed paraffin oil weight were measured and the $SiO_2/Na_2O$ mole ratio effects on particle size were investigated. Particle size was decreased by increasing the mole ratio of $SiO_2/Na_2O$.

• 한국환경성돌연변이발암원학회지
• /
• 제15권2호
• /
• pp.106-114
• /
• 1995

A method was developed to detect total mutagenicity of fried fish for S. typhimurium TA98, using Ames assay. Method described herein circumvented problems associated with the sample preparation for Ames assay, i.e., a multi-purification step of sample and interference with solvent residuals. Experiment A, the best method developed in the present study, consisted of two important steps: pH adjustment of the aqueous sample solution from fried fish samples to remove impurities, and simultaneous distillation extraction (SDE) for partially purified samples to remove volatile compounds from solvents. The procedure and results were described as below. Fillet of gizzard shad (Konosirus punctatus) fish sample fried for 10 min each side on the temperature-controlled fry-pan (210$\circ$C) was homogenized in an aqueous acidic solution (pH 2) with a homogenizer, followed by filtration through Celite. The tiltrate (pH 2), removed some impurities by extraction with chloroform:methanol (2:1, v/v) mixture, was adjusted pH to 10 and then centrifuged to remove precipitate. The ethylacetate extract from the tiltrate of pH 10 was rotoevaporated and purified by SDE apparatus for 2 hours. Experiment A revealed significantly higher revertants (1928 per 25 g fried sample) than other Experiment (B, C, or D) tested. Experiment A gave good results in the mutagenicity test of fried fish sample with few purification steps using only 25 g fried sample and 650 ml of solvents; and thus this method could be a useful tool for the screening the mutagenicity or antimutagenicity of other foods as well.