• Applied Chemistry for Engineering
• /
• v.23 no.2
• /
• pp.222-227
• /
• 2012

In this study, nano-emulsion containing ethyl acetate fraction of Polygonum aviculare (P. aviculare) extract was prepared and skin permeability of the nano-emulsion was evaluated. Nano-emulsion was prepared using homogenizer and microfluidizer by the high-energy method. The droplet size and loading efficiency of nano-emulsion containing ethyl acetate fraction of P. aviculare extract were determined. The mean droplet size was 238 nm and the loading efficiency was more than 98%. The size distribution of nano-emulsion was a monodispersed form and nano-emulsion was more stable than that of using typical emulsion without using the microfluidizer. The in vitro skin permeation study of nano-emulsion containing ethyl acetate fraction of P. aviculare extract was carried out using Franz diffusion cells. Compared to 1,3-butylene glycol, nano-emulsion showed greater values of cumulative permeation of ethyl acetate fraction from P. aviculare extract. These results indicate that the stability and skin permeability of nano-emulsion containing ethyl acetate fraction of P. aviculare exerting anti-oxidative and anti-aging activities were enhanced.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.3
• /
• pp.801-812
• /
• 2021

In order to delivery biotin to skin, ethosomes containing both biotin and ceramide were researched by using high pressure homogenizer. Biotin was utilized as a drug and ceramide NP was utilized as a supporter of bilayer. The biotin was entrapped in aqueous core, while ceramide NP was packed in the bilayer of the ethosomes. Looking at the physical properties of vesicles containing ceramide NP, the sized was 80~130 nm, the polydispersity index was 0.09~0.16, and the zeta potential was -40~-49 mV. In vesicles without ceramide NP, the size was 124.80±1.46 nm, and the zeta potential and polydispersity index were -45.48±1.27 mV and 0.088±0.018, respectively. Therefore, the ethosome with ceramide NP has improved physical properties of vesicles compared to the ethosome without ceramide NP. Skin absorption rates of ethosomes with ceramide NP were 6.13~14.98%, while skin absorption rate of ethosome without ceramide NP was 7.08% at 12 h. In conclusion, ethosomes containing ceramide NP not only improved the skin absorption efficiency, but had also a positive effect on the stability of vesicles.

• Archives of Pharmacal Research
• /
• v.20 no.5
• /
• pp.480-485
• /
• 1997

The absorption profile of phenytoin Na emulsion were examined compared to that of phenytoin suspension after oral administration in the rat. The corn oil-in-water emulsion, particle size of $184{\pm}$57.8 nm, was prepared using a microfludizer, and phenytoin Na added by shaft homogenizer. The phenytoin emulsion or suspension, 100 mg/kg, were intubated intragastrically using oral dosing needle and blood samples were withdrawn via an indwelling cannula from the conscious rat. Plasma concentrations of phenytoin were measured with HPLC using phenacetin as an internal standard. The plasma concentration versus time data were fitted to a one compartment open model and the pharmacokinetic parameters were calculated using the computer program, Boomer. The phenytoin plasma concentrations from the emulsion at each observed time were about 1.5-2 times higher than those from the suspension, significantly at time of 5, 6 and 7 hr after administration. The absorption $(k_a)$ and elimination rate constant $(k_e)$ were not altered significantly, however the AUC increased from 65.6 to $106.7{\mu}ghr/ml$ after phenytoin suspension or emulsion oral administration, respectively. From an equilibrium dialysis study, the diffusion rate constant $(k_{IE})$ was considerably higher from the phenytoin Na emulsion $(0.0439 hr{-1})$ than phenytoin suspension $(0.0014 hr{-1})$.

• Food Science and Biotechnology
• /
• v.17 no.2
• /
• pp.324-329
• /
• 2008

The effect of ultra-high pressure homogenization on the emulsifying properties of whey protein was investigated in a model emulsion made with whey protein isolate and soya oil under various pH. The emulsifying properties, the average diameter of the oil droplets ($d_{vs}$), and the protein load, were measured for each emulsion produced at different homogenization pressures (50 to 200 MPa) and pH values (4.6 to 8.0). According to the results of variance analysis and response surface, the pH had more influence on oil droplet size and protein load than homogenization pressure. The model equations, which were obtained by response surface analysis, show that pH and homogenization pressure had the major effect on oil droplet size and protein load. Higher homogenization pressure decreased the average droplet size and the protein load. Homogenization at high pressure, as opposed to low pressure, causes no overprocessing, but the effect was pH-dependent. The average diameter of the oil droplets increased slightly by decreasing the pH from 8.0 to 6.5 and then increased dramatically toward the isoelectric point of whey protein (i.e., at pH 4.6). Moreover associated droplets were found at acidic pH and their size was increased at high temperature.

• International Journal of Aeronautical and Space Sciences
• /
• v.14 no.2
• /
• pp.140-145
• /
• 2013

The development of high performance fabrics have advanced body armor technology and improved ballistic performance while maintaining flexibility. Utilization of the shear thickening phenomenon exhibited by Shear Thickening Fluids (STF) has allowed further enhancement without hindering flexibility of the fabric through a process of impregnation. The effect of STF impregnation on the ballistic performance of fabrics has been studied for impact velocities below 700 m/s. Studies of STF-impregnated fabrics for high velocity impacts, which would provide a transition to significantly higher velocity ranges, are lacking. This study aims to investigate the effect of STF impregnation on the high velocity impact characteristics of Kevlar fabric by effectively dispersing silica nanoparticles in a suspension, impregnating Kevlar fabrics, and performing high velocity impact experiments with projectile velocities in the range of 1 km/s to compare the post impact characteristics between neat Kevlar and impregnated Kevlar fabrics. 100 nm diameter silica nanoparticles were dispersed using a homogenizer and sonicator in a solution of polyethylene glycol (PEG) and diluted with methanol for effective impregnation to Kevlar fabric, and the methanol was evaporated in a heat oven. High velocity impact of STF-impregnated Kevlar fabric revealed differences in the post impact rear formation compared to neat Kevlar.

• Korean Journal of Materials Research
• /
• v.18 no.11
• /
• pp.610-616
• /
• 2008

Oil-based nanofluids were prepared by dispersing Ag, graphite and carbon black nanoparticles in lubricating oil. Agglomerated nanoparticles were dispersed evenly with a high-speed bead mill and/or ultrasonic homogenizer, and the surfaces of the nanoparticles were modified simultaneously with several dispersants. Their tribological behaviors were evaluated with a pin-on-disk, disk-on-disk and four-ball EP and wear tester. It is obvious that the optimal combination of nanoparticles, surfactants and surface modification process is very important for the dispersity of nanofluids, and it eventually affects the tribological properties as a controlling factor. Results indicate that a relatively larger size and higher concentration of nanoparticles lead to better load-carrying capacity. In contrast, the use of a smaller size and lower concentration of particles is recommended for reducing the friction coefficient of lubricating oil. Moreover, nanofluids with mixed nanoparticles of Ag and graphite are more suitable for the improvement of load-carrying capacity and antiwear properties.

• Korean Journal of Materials Research
• /
• v.28 no.6
• /
• pp.337-342
• /
• 2018

Using a high pressure homonizer, we report on the electrochemical performance of $Li_4Ti_5O_{12}(LTO)$ particles manufactured as anode active material for lithium ion battery. High-pressure synthesis processing is performed under conditions in which the mole fraction of Li/Ti is 0.9, the synthesis pressure is 2,000 bar and the numbers of passings-through are 5, 7 and 10. The observed X-ray diffraction patterns show that pure LTO is manufactured when the number of passings-through is 10. It is found from scanning electron microscopy analysis that the average size of synthesized particles decreases as the number of passings-through increases. $LiCoO_2-based$ active cathode materials are used to fabricate several coin half/full cells and their battery characteristics such as lifetime, rate capability and charge transfer resistance are then estimated, revealing quite good electrochemical performance of the LTO particles as an effective anode active material for lithium secondary batteries.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.201-201
• /
• 2013

ITO는 투명하면서도 전도성이 매우 높은 물질로 디스플레이 분야에서 전극으로 많이 사용된다. 하지만 ITO는 세라믹 물질이기 때문에 공정 단가가 높고, 유연성이 낮아 구부릴 경우 전도성이 파괴되며 충격에도 약하여 flexible한 소자에 적용할 수 없다. 또한 metal diffusion이 잘 일어나는 물질이기 때문에 OLED 소자의 특성을 저해한다. 이와 같은 문제점을 해결하기 위해 ITO를 대체하여 graphene을 이용한 투명전극 연구개발이 활발히 진행되고 있다. Graphene은 높은 mobility와 전도도를 가지고 있으며, 높은 열전도성, Young's modulus, 그리고 mechanical flexibility를 가진 물질이다. 최근에 이러한 장점들로 인해 ITO를 대체하는 물질로서 각광을 받고 있지만 graphene은 Cu, Ni과 같은 금속표면에 한정되어 성장하는 문제점을 가지고 있다. 이 graphene 합성방법은 전사과정을 필요로 하며, 이로 인해 낮은 생산성과 낮은 수율을 야기한다. 최근 높은 생산성을 가지는 graphene 전극을 만들기 위해 Reduced Graphene Oxide (rGO) 연구가 활발히 진행되고 있다. 그러나 rGO는 산화환원 과정에서 전기전도도와 electron mobility가 완벽히 회복되지 못한다는 문제점을 가지고 있다. 그리하여 본 연구에서는 높은 투과도와 높은 전도도를 갖는 graphene 전극을 얻기 위해서 powdered graphene flake를 사용하였다. Graphene flake를 IPA solvent에 분산시키기 위해 sonicator과 homogenizer를 이용하여 Graphene flake solution을 제작하였다. 그리고 uniform한 전극을 만들기 위해 Spray Coating 방법을 이용하여 PET 기판 위에 graphene flake를 증착시켰다. graphene flake를 이용하여 높은 투과도와 낮은 면저항을 갖는 투명전극을 제작하고, 그 특성을 UV-visible spectrophotometer과 four point probe를 이용하여 확인하였다.

• Journal of the Korean Applied Science and Technology
• /
• v.23 no.1
• /
• pp.1-11
• /
• 2006

The W/O emulsion was formed by mixing hydrophobic nonion surfactants of span 80 and tween 60 with kerosine, and by adding sodium silicate aqueous solution. Precipitating the W/O emulsion by sodium bicarbonate resulted in spherical silica particles. Shape and size distribution of silica particles were observed. The particles were spherical and they have narrow size distribution. Particle sizes were 9.29, 7.39 and $5.73\;{\mu}m$ at homogenizer speed of 2500, 3000, and 3500 rpm, respectively. The particle size was decreased by increasing agitation speed due to the formation of emulsion droplet. At fixed agitation speed, absorbed paraffin oil weight were measured and the $SiO_2/Na_2O$ mole ratio effects on particle size were investigated. Particle size was decreased by increasing the mole ratio of $SiO_2/Na_2O$.

• Environmental Mutagens and Carcinogens
• /
• v.15 no.2
• /
• pp.106-114
• /
• 1995

A method was developed to detect total mutagenicity of fried fish for S. typhimurium TA98, using Ames assay. Method described herein circumvented problems associated with the sample preparation for Ames assay, i.e., a multi-purification step of sample and interference with solvent residuals. Experiment A, the best method developed in the present study, consisted of two important steps: pH adjustment of the aqueous sample solution from fried fish samples to remove impurities, and simultaneous distillation extraction (SDE) for partially purified samples to remove volatile compounds from solvents. The procedure and results were described as below. Fillet of gizzard shad (Konosirus punctatus) fish sample fried for 10 min each side on the temperature-controlled fry-pan (210$\circ$C) was homogenized in an aqueous acidic solution (pH 2) with a homogenizer, followed by filtration through Celite. The tiltrate (pH 2), removed some impurities by extraction with chloroform:methanol (2:1, v/v) mixture, was adjusted pH to 10 and then centrifuged to remove precipitate. The ethylacetate extract from the tiltrate of pH 10 was rotoevaporated and purified by SDE apparatus for 2 hours. Experiment A revealed significantly higher revertants (1928 per 25 g fried sample) than other Experiment (B, C, or D) tested. Experiment A gave good results in the mutagenicity test of fried fish sample with few purification steps using only 25 g fried sample and 650 ml of solvents; and thus this method could be a useful tool for the screening the mutagenicity or antimutagenicity of other foods as well.