• Design & Manufacturing
• /
• 제14권1호
• /
• pp.56-62
• /
• 2020

An electron beam was used to mainly utilize for polishing, finishing, welding, a lithography process, etc. Due to the high technical level of difficulty of high-power density electron beam, it is difficult to secure related technologies. In this study, research was carried out to improve the machinability by developing the vaporized amplification sheets to realize the electron beam drilling technology. Their vaporized amplification sheets were analyzed by using the measurement of chemical and composition, which is such as TGA, SEM. We analyzed micro-hole processing using a microscope. Also, the thermal characteristics of vaporized amplification sheets are highly significant for applying to high-power density electron beam technique. So, we finished the vaporized amplification sheets according to the process conditions and analyzed it according to the machining conditions of the electron beam. It was confirmed that the effect on the experimental results differs depending on the influence of the metal powder contained in the developed material.

• 한국정밀공학회지
• /
• 제22권11호
• /
• pp.82-90
• /
• 2005

Recently, the in-line vision inspection has become the subject of growing research area in the visual control systems and robotic intelligent fields that are required exact three-dimensional pose. The objective of this article is to study the pc based in line visual inspection with the hand-eye structure. This paper suggests three dimensional structured light measuring principle and design method of laser sensor header. The hand-eye laser sensor have been studied for a long time. However, it is very difficult to perform kinematical analysis between laser sensor and robot because the complicated mathematical process are needed for the real environments. In this problem, this paper will propose auto-calibration concept. The detail process of this methodology will be described. A new thinning algorithm and constrained hough transform method is also explained in this paper. Consequently, the developed in-line inspection module demonstrate the successful operation with hole, gap, width or V edge.

• 소성∙가공
• /
• 제14권2호
• /
• pp.160-167
• /
• 2005

In the present study about extru-bending of angle product, the bending of extruded angle products with the $'\Lambda'$ section and 'ㄱ', section can be obtained using two extrusion billets by the hot metal extru-bending machine with the two punches moving in the different velocity. The bending curvature can be controlled by the different velocity of billets through the two-hole container. This paper describes simulations and experiments of extru-bending process that can make bending during extruding by the difference of stem velocities. And they are applied to two kinds of dies, that is, one of them is conical dies with symmetry $'\Lambda'$ section and the other one is conical dies with asymmetry 'ㄱ' section. The results of the forming simulation by $DEFORM^{TM}-3D$ and results of experiments show that the bending phenomenon at the die exit during extrusion can be obtained with two extrusion billet by the two stems moving in the different velocity. And it was known that it is possible to design the structure of conical cavity of extrusion dies and to control the curvature of product through the simulation and experiment of extru-bending process.

• 한국컴퓨터그래픽스학회논문지
• /
• 제14권2호
• /
• pp.1-8
• /
• 2008

본 논문은 사용자가 카메라와 트래커가 부착된 HMD를 착용하고, 햅틱 장비를 사용하여 혼합현실 환경 상에서 기계적 상황훈련을 수행하는 시스템에 대하여 설명한다. 본 시스템은 발달장애인들의 시지각 협응능력 향상을 위해 도출된 기계적 상황훈련에 대한 시나리오를 기반으로 한다. 사용자는 HMD를 통해 보여 지는 가상의 핀을 햅틱으로 제어하여 작업판에 꽃는 상황훈련을 수행하고, 시스템은 FSM(Finite State Machine)기반으로 사용자의 행동에 맞는 피드백을 전달한다. 또한, 상황훈련에 대한 현실감을 높여 훈련 효과를 증대시키기 위해 가상 환경에 실제 사용자의 손을 삽입하고, 햅틱을 통해 촉감을 전달한다.

• 한국수소및신에너지학회논문집
• /
• 제24권5호
• /
• pp.444-450
• /
• 2013

The distribution performance of refrigerant distributors in air conditioner evaporators was examined numerically and experimentally. Internal flow analysis of the distributor by CFD found that the distance from the socket to the cone, the angle of the cone and the base area of the cone were the most important factors affecting refrigerant distribution ability and vortex creation. To enhance distribution performance, two distributors with improved internal structures were designed. To test these new structures, distribution performance was also analyzed by CFD and an empirical experiment was carried out using the water-nitrogen. Experimental results on the distribution fraction of each distributor hole showed a good agreement with the results of the CFD analysis. Thus, the new design of the distributors enhanced distribution performance of the refrigerant distributors.

• 대한기계학회논문집B
• /
• 제25권11호
• /
• pp.1616-1623
• /
• 2001

A basic experimental study has been carried out to find out the design parameters of fuel 2-staging atomizers in order to reduce nitrogen oxides(NOx) rate emitted from the steam boilers used the liquid fuel. The heavy fuel oil(B-Coil) and fuel 2-staging Y-jet twin-fluid atomizers were adopted in this study. The results of this paper were obtained from the real as well as the model scale atomizers. In the case of model atomizers test, NOx reduction rate was strongly dependent on the staged fuel rate, but it was weakly dependent on the injection hole arrangement and air swirl conditions. The real scale atomizers was designed and manufactured on the base of these test results, and those was mounted and operated in the real boiler generates 185 ton steam per an hour. The reduction rate of the model and real plant was reached 10∼30% of base NOx by atomizers. but dust was sharply increased in the low O$_2$combustion region of the real plant.

• Journal of Mechanical Science and Technology
• /
• 제18권5호
• /
• pp.820-829
• /
• 2004

The In-Containment Refueling Water Storage Tank (IRWST), one of the design improvements applied to the APR -1400, has a function to condense the high enthalpy fluid discharged from the Reactor Coolant System (RCS). The condensation of discharged fluid by the tank water drives the tank temperature high and causes oscillatory condensation. Also if the tank cooling water temperature approaches the saturated state, the steam bubble may escape from the water uncondensed. These oscillatory condensation and bubble escape would burden the undue load to the tank structure, pressurize the tank, and degrade its intended function. For these reasons simple analytical modeling and experimental works were performed in order to predict exact tank temperature distribution and to find the effective cooling method to keep the tank temperature below the bubble escape limit (93.3$^{\circ}C$), which was experimentally proven by other researchers. Both the analytical model and experimental results show that the temperature distributions are horizontally stratified. Particularly, the hot liquid produced by the condensation around the sparger holes goes up straight like a thermal plume. Also, the momentum of the discharged fluid is not so strong to interrupt this horizontal thermal stratification significantly. Therefore the layout and shape of sparger is not so important as long as the location of the sparger hole is sufficiently close to the bottom of the tank. Finally, for the effective tank cooling it is recommended that the locations of the discharge and intake lines of the cooling system be cautiously selected considering the temperature distribution, the water level change, and the cooling effectiveness.

• 한국응용과학기술학회지
• /
• 제30권1호
• /
• pp.160-165
• /
• 2013

유기전기발광 소자에서 천연색을 구현하기 위해서는 적색, 녹색, 청색 발광물질이 필요하다. 그러나 적색과 녹색의 발광 물질에 대한 연구는 매우 활발하나 청색의 물질에 대한 연구가 미흡한 것은 높은 발광 에너지 때문으로 보인다. 본 연구는 발광 효율이 높으며 열적 안정성이 좋은 화합물을 합성하려는 것으로 carbazole로 치환된 anthracene 화합물 합성에 관한 것이다. Tert-butyl 기로 치환된 carbazole에 전기 발광 성질과 열적 안정도가 좋은 anthracene을 직접 결합시킴으로써 정공전달 특성을 갖는 작용기와 전자전달 특성을 갖는 작용기 간의 거리에 대한 연구를 시작하고자 하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 PARALLEL CFD 2006
• /
• pp.395-397
• /
• 2006

Air interlacing serves to protect the yarn against damage, strengthens inter-filament compactness or cohesion, and ensures fabric consistency. The air interlacing nozzle is used to introduce intermittent nips to a filament yarn so as to improve its performance in textile processing. The effect of various interlacing nozzle geometries on the interlacing process was studied. The geometries of interlacing nozzles with single or multiple air inlets located across the width of yarn channels are investigated. The basis case is the yarn channel, with a perpendicular main air inlet in the middle. Other cases have main air inlets, slightly inclined double sub air inlets, The yarn channel cross sectional shapes are either semicircular or rectangular shapes. The compressed impinging jet from the main air inlet hole hits the opposing bottom wall of the yarn channel, is divided into two branches, joins with the compressed air coming out from sub air inlet at the bottom and creates two free jets at both ends of the yarn channel. The compressed air movement in the cross-section consists of two opposing directional vortices. The CFD-FASTRAN flow parallel solver was used to perform steady simulations of impinging jet flow inside of the interlace nozzles. The vortical structure and the flow pattern such as pressure contour, particle traces, velocity vector plots inside of interlace nozzle geometry are discussed in this pater.

• 물과 미래
• /
• 제28권4호
• /
• pp.147-154
• /
• 1995

본 연구에서는 특별한 에너지 감세를 위한 수공구조물이 설치되지 않은 중 소규모 단락부 하류부에서 자유낙하하는 수맥으로 인하여 발생되는 비점착성 하상재료의 세굴특성을 수리모형실험을 통하여 분석하였다. 단락수맥 하류부에서의 세굴특성을 분석하기 위하여 먼저 직사각형 단락수맥의 흐름특성을 조사하였으며, 하상재료, 유량, 하류수심을 변화시키면서 세굴공의 직하류부에 생성되는 둔덕(mound)의 유무로 인한 세굴특성을 비교 분석하였다. 평형세굴심 뿐만 아니라 둔덕의 높이도 밀도 후르드수의 함수로 표시되며, 밀도 후르드수는 다른 무차원량 보다 평형세굴심과 비교적 깊은 관계가 있는 것을 확인하였다. 단락부 하류부 하상 보호공의 설계시 둔덕의 영향을 고려해야 한다는 결론을 얻었다.