• 전기전자학회논문지
• /
• 제23권2호
• /
• pp.606-613
• /
• 2019

본 논문에서는 파장 스위핑 레이저의 평탄 스위핑을 자동 유지하기 위한 새로운 방식을 제안하였다. 이 방식이 적용된 레이저의 제작 및 실험을 통하여 5시간이 경과하여도 평탄 스위핑 특성이 잘 유지되고 있음을 관찰하였다. 그리고 56nm의 스위핑 범위, 1kHz의 스위핑 주파수, 그리고 8.8mW 의 광 출력 파워도 확인하였다. 제안된 방식은 기존에 스위핑 레이저를 장시간 구동시킬 때 불가피하던 수동 편광 조절의 번거로움을 해소시키고 이 과정에서 요구되던 고가 광 스펙트럼 분석기의 사용을 배제시킨다.

• 한국시스템다이내믹스연구
• /
• 제4권2호
• /
• pp.95-130
• /
• 2003

The purpose of this study is to find what causes make public projects hold off, going beyond the planned deadline and budget. Using System Dynamics(SD) and their derivative Urban Dynamics(UD) models, it intends to analyze major feedback loops based on VENSIM and to simulate them with STELLA software, all of which are interrelated with various causes of project delay. To prevent or ameliorate project delay, first of all it advises to focus on endogenous delaying factors not exogenous ones. These factors either reinforce or balance certain loops in complex causal structure, In the case example on the Cremation Building Project in Cheongju, Residents’ participation demand make negotiation put off and delayed negotiation reinforces administrative-expediency planning in order to observe a time limit, on the other hand, once building consensus, it increase both the level of planning performance and public trust. In the meantime, the real planning process used to neglect residents opinions and manage public grievance only through compensation, he a result of simulation, visible fruit of negotiation in the initial phase seems to be not satisfactory owing to funds and time consumed, but after reaching an mutual agreement among stakeholders, planning performance is effective and strategic than administrative-expediency planning viewed in both financial and time angle. It proposes to devise specific tools schematizing project implementation. In order to upgrade the quality of project management, it recommends for planners to adopt key concepts based on SD/UD diagrams and causal loops, which would contribute to enriching Planning abbots.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제11권4호
• /
• pp.238-246
• /
• 2011

A 3-5 GHz UWB radar chip in 0.13 ${\mu}m$ CMOS process is presented in this paper. The UWB radar transceiver for surveillance and biometric applications adopts the equivalent time sampling architecture and 4-channel time interleaved samplers to relax the impractical sampling frequency and enhance the overall scanning time. The RF front end (RFFE) includes the wideband LNA and 4-way RF power splitter, and the analog signal processing part consists of the high speed track & hold (T&H) / sample & hold (S&H) and integrator. The interleaved timing clocks are generated using a delay locked loop. The UWB transmitter employs the digitally synthesized topology. The measured NF of RFFE is 9.5 dB in 3-5 GHz. And DLL timing resolution is 50 ps. The measured spectrum of UWB transmitter shows the center frequency within 3-5 GHz satisfying the FCC spectrum mask. The power consumption of receiver and transmitter are 106.5 mW and 57 mW at 1.5 V supply, respectively.

• Radiation Oncology Journal
• /
• 제32권2호
• /
• pp.84-94
• /
• 2014

Purpose: To quantify the cardiac dose reduction during breathing adapted radiotherapy using Real-time Position Management (RPM) system in the treatment of left-sided breast cancer. Materials and Methods: Twenty-two patients with left-sided breast cancer underwent CT scans during breathing maneuvers including free breathing (FB), deep inspiration breath-hold (DIBH), and end inspiration breath-hold (EIBH). The RPM system was used to monitor respiratory motion, and the in-house self respiration monitoring (SRM) system was used for visual feedback. For each scan, treatment plans were generated and dosimetric parameters from DIBH and EIBH plans were compared to those of FB plans. Results: All patients completed CT scans with different breathing maneuvers. When compared with FB plans, DIBH plans demonstrated significant reductions in irradiated heart volume and the heart $V_{25}$, with the relative reduction of 71% and 70%, respectively (p < 0.001). EIBH plans also resulted in significantly smaller irradiated heart volume and lower heart $V_{25}$ than FB plans, with the relative reduction of 39% and 37%, respectively (p = 0.002). Despite of significant expansion of lung volume using inspiration breath-hold, there were no significant differences in left lung $V_{25}$ among the three plans. Conclusion: In comparison with FB, both DIBH and EIBH plans demonstrated a significant reduction of radiation dose to the heart. In the training course, SRM system was useful and effective in terms of positional reproducibility and patient compliance.

• 대한기계학회논문집
• /
• 제16권9호
• /
• pp.1788-1795
• /
• 1992

본 연구에서는 상술한 특성을 갖는 유동자에 대하여 신뢰성이 보장된 스펙트 럼 추정법의 모색과 화립을 위해 의사 난류신호(turbulent-like signal)를 자기회기 모형(autoregressive model:AR model)으로 생성하고 추출간격이 유동장에 영향을 받는 비주기적 확률과정을 수치적으로 모사한다. 이 비주기적 실현 신호로 부터 현재 가 장 많이 사용되고 있는 Roberts와 Gaster의 직접 변화법과 추출 및 유지신호의 피리오 도그램(periodogram)법에 대해 데이터 밀도와 난류강도의 다양한 변화에 따른 속도편 의의 영향 등을 살펴보는데 목적을 둔다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 춘계학술대회논문집
• /
• pp.228-230
• /
• 2005

Magnetic field has been used to hold plasma at high temperature for a long time. Reverse field has shown unstable process. Using ratio frequency, the author could control the instability of the process and formed a stable erversed field.

• Structural Engineering and Mechanics
• /
• 제9권4호
• /
• pp.339-347
• /
• 2000

The creep deformation of pure bending (hold constant moment for a period of time) tests were conducted in this paper. Thin-walled tubes of 304 stainless steel were used in this investigation. The curvature-ovalization measurement apparatus, designed by Pan et al. (1998), was used for conducting the present experiments. It has been found that as soon as the creep deformation is started, the magnitudes of the tube curvature and ovalization of tube cross-section quickly increase. The magnitudes of the creep curvature and ovalization of tube cross-section increase fast with a higher hold moment than that with a lower one. Owing to the continuously increasing curvature during the creep deformation, the tube specimen buckles eventually.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2765-2770
• /
• 2003

This paper introduces a novel control algorithm, energy bounding algorithm, for stable haptic interaction. The energy bounding algorithm restricts energy generated by zero-order hold within consumable energy by physical damping that is energy consumption element in the haptic interface. The passivity condition can always be guaranteed by the energy bounding algorithm. The virtual coupling algorithm restricts the actuator force with respect to the penetration depth and restricts generated energy. In contrast, energy bounding algorithm restricts the change of actuator force with respect to time and restricts generated energy by zero-order hold. Therefore, much stiffer contact simulation can be implemented by the energy bounding algorithm. Moreover, the energy bounding algorithm doesn’t is not computationally intensive and the implementation of it is very simple.

• 제어로봇시스템학회논문지
• /
• 제16권9호
• /
• pp.905-912
• /
• 2010

Modern version of advanced supersonic fighter have ATCS (Automatic Thrust Control System) to maximum flight safety, fuel efficiency and mission capability the integrated advanced autopilot system such as TFS (Terrain Following System), GCAS (Ground Collision Avoidance System) and AARS (Automatic Attitude Recovery System) and etc. This paper addresses the design and verification of ATCS based on advanced supersonic trainer in HILS (Hardware In the Loop Simulator) with minimum hardware modification to reduce of development cost and maintain of system reliability. The function of ATCS is consisted of target speed hold mode in UA (Up and Away) and angle of attack hold mode in PA (Power Approach). The real-time pilot evaluation reveals that pilot workload is minimized in cruise and approach flight stage by ATCS.

• 한국환경과학회지
• /
• 제9권5호
• /
• pp.393-396
• /
• 2000

Packing tower has been used in the chemical industry and the protection of environment for a long time. In the view of environmental protection purification of exhaust gas can be performance effective by gas absorption in counter-current packing tower. In this study characteristics of hydraulic and mass transfer were investigated in D. $0.3m {\times} H. 1.4m$ packing tower with 50mn plastic Hiflow-ring. This study was carried out "Test systems were experimented in conditions of Air, $Air/H_2O. NH_3-Air/H_2O, NH_3-Air/H_2O-H_2SO_4$ and $SO_2-Air/H_2O-NaOH$ under steady state" The extent of test included dry and wetting pressure drop physical law separation efficiency and hold-up as function of gas and liquid load.quid load.