• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.1
• /
• pp.15-22
• /
• 2002

This paper introduces a compensating system for machining error, which is resulted from chucking with separated jaws. In machining the chucked cylindrical workpiece, the deterioration of machining accuracy, such as out-of-roundness is inevitable due to the variation of the radial compliance of the chuck workpiece system which is caused by the position of jaws with respect to the direction of the applied force. To compensate the chucking compliance induced error, firstly roundness profile of workpiece due to chucking compliance after machining needs to be predicted. Then using this predicted profile, the compensated tool feed trajectory can be generated. And by synchronizing the cutting tool feed system with workpiece rotation, the chucking compliance induced error can be compensated. To satisfy the condition that the cutting tool feed system must provide high speed and high position accuracy, brushless linear DC motor is used. In this study, firstly through the force-deflection experiment in workpiece chucked lathe, the variation of radial compliance of chuck workpiece system is obtained. Secondly using the mathematical equation and cutting experiment result, the predicted profile of workpiece and its compensation tool trajectory are generated. Thirdly the configuration of compensation system using linear motor is introduced, and to improve the system performance, PID controller is designed. Finally the tracking performance of system is examined by experiment. Through the real cutting experiment, roundness is significantly improved.

• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.2
• /
• pp.186-194
• /
• 1997

In this thesis, a new speed control algorithm based on the load torque observer theory is pro¬posed for the high performance speed control of a voltage source inverter to drive a 3 - phase induction motor. The proposed system becomes robust against disturbances using a feed -- for¬ward control of the load torque estimated at load torque observer. Computer simulation and experimental works using the proposed control confirm that transient response for the varia¬tion ofload torque becomes improved, compared with the conventional PI control method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1877-1880
• /
• 2005

This paper proposed the new current feed-back amplifier for low supply voltage application. The input stage was designed to be a class-AB circuit and achieve the low supply-voltage operation down to $2V_{TH}+2V_{DS(SAT)}$. With the self-adjust bias current, the high performance can be adopted with high stability. The circuit was successfully proven by the simulation with MOSIS 0.5 ${\mu}$m MOS technology.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.5
• /
• pp.7-14
• /
• 2002

In order to achieve high precision machine tools, the research for performance enhancement of feed drive systems is required. Development of the high speed feed drive system has been a major issue for the past few decades in machine tool indestries. Because table levitation system decrease the table weight, an effect of reaction by weight is minimized and lost motion can be removed at maximum. In case fled system is designed with drive motor, ball screw and support bearing load capacity selection, an effect of decrease of the table weight exist. So, the table weight through an effect of decrease call it into the realization of cost down. Stick-slip friction has a great influence on the contouring accuracy of CNC machine tools. In this paper table levitation system has been developed for the stick-slip in a fled drive systems.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.621-625
• /
• 1996

The feed system of the machine tools is limited by the mechanical transmission elements. However, thanks to the advanced modern technology, those machines are able to equip with linear motors. In this paper, the types and application aspects of linear motor are discussed and a synchronous type of the linear motors has been applied to X-Y table for machining center. The performance shows an outstanding result in terms of the accuracy, speed and stiffness. Machine tool system with linear motors is expected to be more productive machines using linear motor in the near next years.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.3
• /
• pp.426-433
• /
• 2008

Heat stress is major welfare problem in the poultry industry. Huge economic losses occur every year because of mortality and decreased production due to high environmental temperatures. This experiment was conducted to determine the effects of level of inclusion of ascorbic acid supplementation to the diet on performance, carcass composition and bone characteristics of male turkeys during high summer temperature. A total of 120 day-old turkey chicks were wing banded at hatch and randomly distributed into 3 treatment groups. Three diets were formulated to provide a similar nutrient profile with the exception of using three graded levels of ascorbic acid, namely 0, 150 and 300 mg/kg of the diet. The experimental diets were used from 0 to 18 weeks of age. Body weights, feed intake and feed conversion ratio, slaughter weight, carcass yield, portions, composition and thigh and breast pigmentation of the turkeys were not affected by ascorbic acid (p>0.05). Also, shank and tibia bone characteristics were not affected by ascorbic acid (p>0.05).

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.6
• /
• pp.880-883
• /
• 2003

The objective of this study was to measure performance of young broiler chickens fed three varieties of high-oil corn (HOC 1, 2, and 3) compared with eight varieties of normal corn (NC). HOC varieties contained about 80% more oil than NC (average crude fat; 6.71% vs 3.72%) and about 29% more protein (average CP; 9.54% vs 7.38%). Each experimental diet was formulated with the same amount (55.205%) of each corn hybrid. Experiment 1 had by six dietary treatments (HOC1 and five NC varieties, 360 chickens) and Experiment 2 had five treatments (HOC2, HOC3, and three NC varieties, 250 chickens). In Exp. 1, for feed efficiency (F/G), the treatment contained HOC1 had better performance (p<0.05) than other NC varieties except NC5. As expected, there was no significant difference in average daily feed intake (p>0.05) among dietary treatments. The dietary treatment of HOC1 gave an improvement of 4.3% in F/G that came from 6% higher gross energy (GE) value of HOC1. Compared with Exp. 2, the dietary treatments contained HOC hybrids gave 4.4% higher F/G than NC dietary treatments, which came from a 5% increase in GE value. HOC varieties had superior nutrients content to NC for poultry, due to the fact that HOC contained higher concentrations of energy, protein, lysine, and methionine, thus improving growth and F/G.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.5
• /
• pp.802-811
• /
• 2020

Objective: Two experiments were conducted to investigate the effects of dietary sucralose on diet preference and growth performance of weaned piglets, and a third experiment was a 28-d safety study to examine if high-dose sucralose could affect the health state of weaned piglets. Methods: In experiment one, 48 piglets had free access to a corn-soybean based diet and the same diet supplemented with 150 mg/kg sucralose for 15 d. In experiment two, 180 piglets were blocked into 5 treatments with 6 replications. They were fed basal diets supplemented with 0, 75, 150, 225, and 300 mg/kg sucralose for 28 days. In experiment three, 108 piglets were randomly assigned to 3 treatments and fed diets supplemented with 0, 150 (suitable level), and 1,500 (ten-fold suitable level) mg/kg sucralose for 28 d. Results: The experiment 1 showed that piglets preferred (p<0.05) diets containing sucralose during experimental period. In experiment 2, piglets fed a diet supplemented with 150 mg/kg sucralose had a higher average daily gain (ADG) and average daily feed intake (ADFI) than pigs in the control group and other treatment groups during the experiment period. The concentrations of sucralose over 150 mg/kg may decrease feed intake. However, no difference in feed conversion ratio was observed. In experiment 3, piglets fed diet supplemented with 150 mg/kg sucralose had a higher ADG and ADFI than that of pigs in the control group and 1,500 mg/kg treatment groups during the experiment period. Clinical blood metabolites, organ index and histological morphology were not significantly different between sucralose treatments. Conclusion: Sucralose can promote feed intake and thereby improve growth performance of weaned piglets. Moreover, inclusion of 1,500 mg/kg sucralose was demonstrated to have no observed adverse effects. Supplementing 150 mg/kg sucralose for weaned piglets is recommended in this study.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.9
• /
• pp.1348-1354
• /
• 2003

The feeding value of high-oil corn fed to Taiwan Country (TC) chicken was examined by measuring apparent metabolizable energy (AME), growth performance, sexual maturity, carcass characteristics, and plasma pigmentation. In a completely randomized design, 870 sex-intermingled one-wk-old chicks were assigned to one of 30 floor pens, 29 birds per pen, and each pen randomly assigned to one of five dietary treatments. The experiment was ended when birds were 16 wk of age. The five dietary treatments varied in main fat sources, which were corn oil (CO), high-oil corn (HOC), lard (LRD), whole soybean (WSB) and yellow corn (YC), respectively. All the diets were formulated isonitrogenously, isocalorically, and of equal lysine and methionine contents except YC, in which equal amounts of YC replaced HOC. The results indicated that feed conversion in HOC was 8% higher (p<0.05) than YC whereas the calculated AME of HOC was only 3.5% to 4.0% higher than that of YC. No significant differences were observed in body weight, body weight gain, feed consumption, feed conversion ratio and ME efficiency for body weight gain among CO, HOC, LRD, and WSB. No significant differences existed in both skin and muscle pigmentation of breast among the five dietary treatments. No significance differences existed in plasma carotenoid content measured at various ages among the five dietary treatments except that birds fed with HOC had less (p<0.05) plasma carotenoids at 16 wk-old. The results indicate that if the price of high-oil corn is no more than 1.05 times that of yellow corn, the dietary cost per kg of body weight gain for TC chickens fed diets containing high-oil corn will be less, although their body weight may be lighter compared to chickens fed diets formulated with other fat sources.

• Asian-Australasian Journal of Animal Sciences
• /
• v.7 no.3
• /
• pp.441-448
• /
• 1994

Postweaning performance data were obtained on 187 group fed purebred Angus calves from 12 selected sires (six high and six low feed conversion sires) in 1985 and 1986. The objective of this portion of the study was to develop prediction equations for feed conversion from a stepwise regression analysis. Variables measured were on-test weight (ONTSTWT), on-test age (ONTSTAG), five weights by 28-d periods, seven linear body measurements: heart girth (HG), hip height (HH), head width (HDW), head length (HDL), muzzle circumference (MC), length between hooks and pins (HOPIN) and length between shoulder and hooks (SHHO), and backfat thickness (BF). Stepwise regressions for maintenance adjusted feed conversion (ADJFC) and unadjusted feed conversion (UNADFC) over the first 140 d of the test, and total feed conversion (FC) until progeny reached 8.89 mm of back fat were obtained separately by conversion groups and sexes and for combined feed conversion groups and sexes. In general, weights were more important than linear body measurements in prediction of feed utilization. To some extent this was expected as weight is related directly to gain which is a component of feed conversion. Weight at 112 d was the most important variable in prediction of feed conversion when data from both feed conversion groups and sexes were combined. Weights at 84 and 140 d were important variables in prediction of UNADFC and FC, respectively, of bulls. ONTSTWT and weight at 140 d had the highest standardized partial regression coefficients for UNADFC and ADJFC, respectively, of heifers. Results indicated that linear measurements, such as MC, HDL and HOPIN, are useful in prediction of feed conversion when feed in takes are unavailable.