Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Chucking Compliance Compensation by Using Linear Motor

리니어 모터를 이용한 척킹 컴플라이언스 보상

  • Published : 2002.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper introduces a compensating system for machining error, which is resulted from chucking with separated jaws. In machining the chucked cylindrical workpiece, the deterioration of machining accuracy, such as out-of-roundness is inevitable due to the variation of the radial compliance of the chuck workpiece system which is caused by the position of jaws with respect to the direction of the applied force. To compensate the chucking compliance induced error, firstly roundness profile of workpiece due to chucking compliance after machining needs to be predicted. Then using this predicted profile, the compensated tool feed trajectory can be generated. And by synchronizing the cutting tool feed system with workpiece rotation, the chucking compliance induced error can be compensated. To satisfy the condition that the cutting tool feed system must provide high speed and high position accuracy, brushless linear DC motor is used. In this study, firstly through the force-deflection experiment in workpiece chucked lathe, the variation of radial compliance of chuck workpiece system is obtained. Secondly using the mathematical equation and cutting experiment result, the predicted profile of workpiece and its compensation tool trajectory are generated. Thirdly the configuration of compensation system using linear motor is introduced, and to improve the system performance, PID controller is designed. Finally the tracking performance of system is examined by experiment. Through the real cutting experiment, roundness is significantly improved.

Keywords

References

  1. RAHMAN Mustafizur and ITO Yoshimi, 1979, 'Machining Accuracy of a Cylindrical Workpiece Held by a Three-Jaw Chuck,' J. JAPE., Vol. 13, No. 1, pp. 7-12
  2. Rahman, M, 'A Study on the Deviation of Shape of a Turned Workpiece Clamped by Multiple Jaws,' Annals of the CIRP, vol. 38/1/1989,, pp. 285-288
  3. Miyao, K and Iwaki, T., 1969, 'Reflection of Circular plate clamped in a Three-Jaw Chuck,' Trans. of the JSME, 35, 270, pp. 313-317 https://doi.org/10.1299/kikai1938.35.313
  4. Walter, M. F and ;Stahl, J. E., 1994, 'The Connection between Cutting and Clamping Force in Turning,' Int. J. Mach. Tools. Manufact, Vol. 34, No. 7, pp. 991-1003 https://doi.org/10.1016/0890-6955(94)90030-2
  5. DOI Mashiro, MASUKO Masami, ITO Yoshimi, 1982, '三つつめチヤシク加工時に生ずる特異なひひりマ- クの觀察,' Trans. of the JSME, 48, 434, pp. 1633-1639
  6. Chang, J. Y., Lai, G. J. and Chen, M. F., 1994, 'A Study on the Chatter Characteristics of the Thin Wall Cylindrical Workpiece,' Int. Mach. Tools. Manufact., Vol. 34, No. 4, pp. 489-498 https://doi.org/10.1016/0890-6955(94)90080-9
  7. Lai, G. J. and Chang, J. Y., 1995, 'Stability Analysis of Chatter Viberation for a Thin Wall Cylindrical Workpiece,' Int. J. Mach. Tools. Manufact, vol. 35, No. 3, pp. 431-444 https://doi.org/10.1016/0890-6955(94)E0011-7
  8. Bartos, F. J., 1997, 'Linear Motor and Control Take a Direct Route to Top Performance,' Control Engineering, Vol. 44, No. 4, pp. 90-2,94,96,98,100
  9. 서준호, '브러시리스 리니어 모터를 이용한 고속 비진원 공구 이송장치의 동특성 및 제어,' 광주과학기술원 1997 석사학위 논문
  10. Srinivasan, K. and Tsao Tsu Chin, 1997, 'Machine Tool Feed Drives and Their Control-A Survey of the State of the Art,' ASME Journal of Manufacturing Science and Engineering, Vol. 119, pp. 743-755 https://doi.org/10.1115/1.2836818
  11. Alter, D. M. and Tsao Tsu-Chin, 1994, 'Stability of Turning Processes with Actively Controlled Linear Motor Feed Drives,' Transactions of the ASME, Vol. 116, pp. 298-307 https://doi.org/10.1115/1.2919362
  12. Alter, D. M. and Tsao Tsu-Chin, 1996, 'Control of Linear Motor for Machine Tool Feed Drives: Design and Implementation of H Optimal Feedback Control,' ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 118, pp. 649-656 https://doi.org/10.1115/1.2802339
  13. Van Brussel, H. and Van den Braembussche, P., 'Robust Control of Feed Drives with Linear Motors,' Annals of the CIRP, Vol. 47/1/1998, pp. 325-328 https://doi.org/10.1016/S0007-8506(07)62843-1
  14. Shahian Bahram and Hassul Michael, Control System Design using Matlab, Prentice Hall
  15. Sigard Skogestad and Ian Postlethwaite, Multivariable Feedback Control-Analysis and Design, John Willy & Sons
  16. Balas, Gray. J., Doly, John C., Glover Keith, Packard Andy and Smith Roy, 1993, '${\mu$}-Analysis and Synthesis TOOLBOX,' The Math Work Inc
  17. Delta Tau System Inc., 1996, 'PMAC User's Manual,'

Cited by

  1. Robust Optimization of the Solenoid Assembly in Electromagnetic Limited Slip Differential by Considering the Uncertainties in Machining Variables vol.35, pp.10, 2011, https://doi.org/10.3795/KSME-A.2011.35.10.1307