• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06a
• /
• pp.111-116
• /
• 2006

The microstickes control effects of some fixing agents, including an inorganic PAC, an organic polyamine (PA) and polydiallydimethyl ammonium chloride (Pdadmac), and a high cationic starch (HCS), were investigated, together with their effects on wet end performances and physical properties of handsheets. Despite that the HCS and Pdadmac had lower cationic charge densities than the PA and PAC (the HCS being even lower), they gave higher zeta potentials to fibers, and lower turbidities, cationic demands and residual COD contents to the pulp liquid phases than the PA and PAC did. In all cases, the HCS showed even better effects than the Pdadmac. In addition, drainage speed was also much higher by the HCS treatments although paper formation was worsened. All the phenomena showed that the HCS can fix more dissolved and colloidal substances to cellulose fibers, indicating that the HCS functioned mainly with flocculation and even hydrogen bonding mechanisms. Data on optical properties further indicated that the HCS interacted preferentially with colloidal substances, since it fixed more 'dirty' microstickes to fibers which decreased more sheet brightness while increasing more sheet opacity (with both higher light absorption and scattering coefficients). Interestingly, the organic fixing agents did not decrease tensile, tearing, and folding strengths of paper sheets made from 100% recycled newsprint pulp, except when they were dosed in high amounts. On the contrary, the inorganic PAC had more serious negative effects on the strength properties, especially on folding endurance. The study suggested that proper use of the HCS can lead to better microstickies control effects than traditional agents and methods.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.6 no.2
• /
• pp.68-73
• /
• 2006

We propose a damascene gate FinFET with Si nanocrystals implemented on bulk silicon wafer for low voltage flash memory device. The use of optimized SRON (Silicon-Rich Oxynitride) process allows a high degree of control of the Si excess in the oxide. The FinFET with Si nanocrystals shows high program/erase (P/E) speed, large $V_{TH}$ shifts over 2.5V at 12V/$10{\mu}s$ for program and -12V/1ms for erase, good retention time, and acceptable endurance characteristics. Si nanocrystal memory with damascene gate FinFET is a solution of gate stack and voltage scaling for future generations of flash memory device. Index Terms-FinFET, Si-nanocrystal, SRON(Si-Rich Oxynitride), flash memory device.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.4 no.3 s.14
• /
• pp.73-81
• /
• 2004

On this study, durability decreasing element caused by salt damage was analyzed elementally and studied with the data of the inside and outside in the country. The design strength and water-cement ratio according to diffusion coefficients of chloride were applied to Fick's diffusion equation. The required over depended on environmental conditions is estimated with endurance period, and the influences on cover according to the transformation of the each parameter were investigated. In consequence, if water-cement ratio decreases and design strength increases, it shows that slowing infiltration velocity of chloride ion can decrease required cover. Especially, it is more effective to use Portland blast-furnace slag cement into high strength concrete in the splash zone environmental conditions in blocking the diffusion of chloride ion. As the result, in the case of the offshore concrete structure needed high durability, it is needed to increase cover($3cm{\sim}8cm$) than minimum standard cover(8cm) according to environmental conditions.

• The Journal of Korean Physical Therapy
• /
• v.29 no.2
• /
• pp.50-54
• /
• 2017

Purpose: This investigation aimed to determine the effects of treadmill training (TT) and high frequency chest wall oscillation (HFCWO) on pulmonary function and walking ability in stroke patients as well as propose an exercise program to improve cardiovascular function. Methods: Twenty hemiplegic stroke patients were randomized to either the control group (CG) (n=10) or the experimental group (EG), which received TT and HFCWO (n=10). Pulmonary function was quantitated using patient forced vital capacity (FVC) and forced expiratory volume at one second (FEV1) while walking speed was assessed by the 10m walking test (10MWT). Further, walking endurance was determined utilizing the 6-minute walk test (6MWT). Subjects of the EG performed the study protocol for 60 minutes, five times a week for six weeks; CG patients did not participate in regular exercise. To determine significance for the differences observed before and after exercise, within-group and between-group comparisons were conducted utilizing paired and independent t-tests, respectively, with the level of significance set at ${\alpha}=0.05$. Results: Within-groups, significant differences were observed in both FVC and FEV1 (p<0.01) following completion of the study protocol. Further, between-group comparisons demonstrated significant differences in both FVC (p<0.05) and FEV1 (p<0.01). Post-exercise, significant changes in the 10MWT and 6MWT score were observed between the EG and CG (p<0.01). Further, statistically significant differences were observed in 6MWT scores between-groups (p<0.05). Conclusion: The TT and HFCWO effectively improved pulmonary function and walking ability in subjects with stroke. The proposed program can be applied to stroke patients as a useful therapy.

• Journal of the Korean Society of School Health
• /
• v.10 no.2
• /
• pp.193-211
• /
• 1997

The study was designed to gain necessary basic data in order to grasp the health knowledge, attitude, and practice level of students and teachers of elementary, middle and high schools. This study was conducted through interviews of 3,400 students and 1,022 teachers attending 14 different schools large, middle and small cities and rural towns during a period of nine months (from Oct. 2 1995 to Jun. 30 1996). By the results of this study, the recommendations can be summarized as follows: 1. A school health development committee should be established of 10 members: school health related teachers (physical trainers, nurses, and teachers in charge of health), parents, persons related to health administration, local medical doctors, and student reprensentatives in order to support and immplement school health development plans. 2. Like advanced countries, a health class of 2~4 hours should beplaced in middle and high schools. A nurse majoring in health from a university should be the teacher. 3. A curriculum of health should contain the following: education on health, sex, alcohol, tabacco, the misuse of the drugs, the structure and function of human body, the growth of the body, mental health, safety and emergency care, the prevention of disease, proper eating habits and nutrition, daily health life, family health education, society health, community health, environmental pollution and individual responsibility. 4. Create a school health promotion center, with a nurse's office, and a sports center which has health machines (bars, aerobics, training, twist machine, belt massage, running machine, bench press, chest waist, hack hip extension machine) as well as a physical strength measuring machine (muscular strength, alertness, flexibility, endurance, lung functions and so on), so that the teaching staff and students can use them and train their bodies. 5. Through a refresher education program, urge teachers to understand school health promotion services. 6. Regulate a standard and establish a system of monitoring the physical enviroment of the school (the height of desks and chairs, illumination facilities, ventilation facilities, safe drinking water). 7. Create a check list of health to evaluate improvement.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.167-167
• /
• 2011

Magnetic random access memory (MRAM) is one of the prospective semiconductor memories for next generation. It has the excellent features including nonvolatility, fast access time, unlimited read/write endurance, low operating voltage, and high storage density. MRAM consists of magnetic tunnel junction (MTJ) stack and complementary metal-oxide semiconductor (CMOS). The MTJ stack is composed of various magnetic materials, metals, and a tunneling barrier layer. For the successful realization of high density MRAM, the etching process of magnetic materials should be developed. Among various magnetic materials, FePt has been used for pinned layer of MTJ stack. The previous etch study of FePt magnetic thin films was carried out using $CH_4/O_2/NH_3$. It reported only the etch characteristics with respect to the variation of RF bias powers. In this study, the etch characteristics of FePt thin films have been investigated using an inductively coupled plasma reactive ion etcher in various etch chemistries containing $CH_4$/Ar and $CH_4/O_2/Ar$ gas mixes. TiN thin film was employed as a hard mask. FePt thin films are etched by varying the gas concentration. The etch characteristics have been investigated in terms of etch rate, etch selectivity and etch profile. Furthermore, x-ray photoelectron spectroscopy is applied to elucidate the etch mechanism of FePt thin films in $CH_4$/Ar and $CH_4/O_2/Ar$ chemistries.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.10 no.1 s.20
• /
• pp.51-54
• /
• 2004

In recently days, the breed fish farm is increased in the beach side for farming fish. In such a farm, the heater is requested for preventing freezing in cold season. The heating material are requested high corrosion resistance and strength for endurance high corrosive salt and pressure. In case of low corrosion resistance and/or strength, the heating element shall be broke down and eventually make spillage or leaking contaminated salt. In the most cases, crevice corrosion is localized form of corrosion usually associated with a stagnant solution on the micro-environmental level. In this study, the crevice corrosion of Ferritic type 430 stainless steel is investigated. The size of specimen is $15{\times}20{\times}3mmt$. Test solution is 1N H2SO4 + 0.05N NaCl. The artificial crevice gap size is $0.24{\times}3{\times}15mmL$. Crevice corrosion is measured under applied voltage 300mV(SCE) to the external surface. the result of this study showed that 1) the induced time for initiation of crevice is 750seconds, 2) potential is dropped in the crevice from the top of gap opening from -320 to -399mV. The result confirmed that the potential drop(IR mechanism) in the crevice is one of mechanism for crevice corrosion.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.237.2-237.2
• /
• 2013

ReRAM cell, also known as conductive bridging RAM (CBRAM), is a resistive switching memory based on non-volatile formation and dissolution of conductive filament in a solid electrolyte [1,2]. Especially, Chalcogenide-based ReRAM have become a promising candidate due to the simple structure, high density and low power operation than other types of ReRAM but the uniformity of switching parameter is undesirable. It is because diffusion of ions from anode to cathode in solid electrolyte layer is random [3]. That is to say, the formation of conductive filament is not go through the same paths in each switching cycle which is one of the major obstacles for performance improvement of ReRAM devices. Therefore, to control of nonuniform conductive filament formation is a key point to achieve a high performance ReRAM. In this paper, we demonstrated the enhanced repeatable bipolar resistive switching memory characteristics by spreading the Ag nanocrystals (Ag NCs) on amorphous GeSe layer compared to the conventional Ag/GeSe/Pt structure without Ag NCs. The Ag NCs and Ag top electrode act as a metal supply source of our devices. Excellent resistive switching memory characteristics were obtained and improvement of voltage distribution was achieved from the Al/Ag NCs/GeSe/Pt structure. At the same time, a stable DC endurance (>100 cycles) and an excellent data retention (>104 sec) properties was found from the Al/Ag NCs/GeSe/ Pt structured ReRAMs.

• Korean Journal of Exercise Nutrition
• /
• v.25 no.2
• /
• pp.20-25
• /
• 2021

[Purpose] The aim of this review was to discuss the effects of vitamin D on physical performance and musculoskeletal injuries in athletes and provide information on the field applications of vitamin D. [Methods] A systematic review was conducted to identify studies on vitamin D in athletes that assessed serum vitamin D levels, vitamin D and physical performance, vitamin D and musculoskeletal injuries, and practical guidelines for supplementation of vitamin D. [Results] Several studies reported that a high proportion of athletes had vitamin D insufficiency or deficiency. Low serum levels of vitamin D in athletes were more pronounced in winter than in other seasons, and indoor athletes had lower serum vitamin D levels than outdoor athletes. Low vitamin D levels have been demonstrated to have negative effects on muscle strength, power, and endurance; increase stress fractures and other musculoskeletal injuries; and affect acute muscle injuries and inflammation following high-intensity exercises. Therefore, periodic assessment and monitoring of vitamin D levels are necessary in athletes; the recommended serum level of 25(OH)D is > 32 ng/mL and the preferred level is > 40 ng/mL (-1). In those with low levels of vitamin D, exposure to sunlight and an improved diet or supplements may be helpful. Particularly, 2000-6000 IU of supplemental vitamin D3 can be consumed daily. [Conclusion] Vitamin D is a potential nutritional factor that can significantly affect physical performance and musculoskeletal injuries in athletes. The importance and role of vitamin D in athletes should be emphasized, and the current levels of vitamin D should be assessed. Therefore, it is essential to periodically evaluate and monitor serum vitamin D levels in athletes.

• Nutrition Research and Practice
• /
• v.8 no.2
• /
• pp.177-182
• /
• 2014

BACKGROUND/OBJECTIVES: Irisin, a newly identified hormone, is associated with energy homeostasis. We investigated whether aged garlic extract (AGE) and exercise training intervention could improve body weight, insulin sensitivity, skeletal muscle fibronectin domain containing protein 5 (FNDC-5) levels, and plasma irisin in high-fat diet (HFD). MATERIALS/METHODS: Male Sprague Dawley rats were fed a ND (normal diet, n=5) or HFD (n=28) for 6 weeks. After 6 weeks, all rats were divided into 5 groups for the next 4 weeks: ND, (normal diet, n=5), HFD (high-fat diet, n=7), HFDA (high-fat diet + aged garlic extract, n=7), HFDE (high-fat diet + exercise, n=7), and HFDEA (high-fat diet + exercise + aged garlic extract, n=7). Exercise groups performed treadmill exercises for 15-60 min, 5 days/week, and AGE groups received AGE (2.86 g/kg, orally injected) for 4 weeks. RESULTS: Significant decreases in body weight were observed in the ND, HFDE, and HFDEA groups, as compared with the HFD group. Neither intervention affected the masses of the gastrocnemius muscle or liver. There were no significant differences in glucose levels across the groups. The homeostatic model assessments of insulin resistance were significantly higher in the HFD group, as compared with the ND, HFDA, HFDE, and HFDEA groups. However, skeletal muscle FNDC-5 levels and plasma irisin concentrations were unaffected by AGE or exercise in obese rats. AGE supplementation and exercise training did not affect skeletal muscle FNDC-5 or plasma irisin, which are associated with insulin sensitivity in obese rats. CONCLUSION: Our results suggest that the protection against HFD-induced increases in body fat/weight and insulin resistance that are provided by AGE supplementation and exercise training may not be mediated by the regulation of FNDC-5 or irisin.