• 한국재료학회지
• /
• 제29권2호
• /
• pp.116-120
• /
• 2019

We prepared $Y_3Al_5O_{12};Ce^{3+},Pr3^{+}$ transparent ceramic phosphor using a solid state reaction method. By XRD pattern analysis and SEM measurement, our phosphors reveal an Ia-3d(230) space group of cubic structure, and the transparent ceramic phosphor has a polycrystal state with some internal cracks and pores. In the Raman scattering measurement with an increasing temperature, lattice vibrations of the transparent ceramic phosphor decrease due to its more perfect crystal structure and symmetry. Thus, low phonon generation is possible at high temperature. Optical properties of the transparent ceramic phosphor have broader excitation spectra due to a large internal reflection. There is a wide emission band from the green to yellow region, and the red color emission between 610 nm and 640 nm is also observed. The red-yellow phosphor optical characteristics enable a high Color Rendering Index (CRI) in combination with blue emitting LED or LD. Due to its good thermal properties of low phonon generation at high temperature and a wide emission range for high CRI characteristics, the transparent ceramic phosphor is shown to be a good candidate for high power solid state white lighting.

• Journal of Ceramic Processing Research
• /
• 제19권6호
• /
• pp.519-524
• /
• 2018

Carbon/carbon composites (C/C) have been widely studied in the aerospace field because of their excellent thermal shock resistance and specific strength at high temperature. However, they have the problems that is easily oxidized and deteriorated under atmospheric environment. In order to overcome these shortcomings, the CVD coating of ultra-high-temperature ceramics to C/C has become an important technical issue. In this study, thermodynamic calculations were performed to TaC CVD coating on C/C by FactSage 6.2 program. The Ta-C phase diagrams were constructed with the results of thermodynamic calculations in the Ta-C-H-Cl system. Based on the Ta-C phase diagram, the experimental conditions were designed to confirm the deposition of various phases such as TaC single phase, TaC + C and $TaC+Ta_2C$ by varying the composition of Ta/C ratio. The deposited films were found to be in good agreement with the predicted phases.

• Composites Research
• /
• 제35권3호
• /
• pp.201-215
• /
• 2022

본 연구에서는 초고온 환경에서 내화학성 및 열적 안정성이 우수한 지오폴리머 기반의 알루미노실리케이트 레진과 세라믹 섬유를 활용한, 목표주파수 X-band(8.2 GHz to 12.4 GHz)에서 전자파를 흡수하는 세라믹 복합재(Radar-absorbing ceramic composite, RACC)를 구현하였다. 주 성분이 FeSi인 판형 구조의 샌더스트 자성 입자를 분산시킨 알루미노실리케이트 레진은 목표 주파수 대역에서 자성 및 유전손실 특성을 발휘하였고, 입도와 무게분율별 유전특성을 Cole-Cole Plot으로 표현하였다. 샌더스트가 분산된 알루미노실리케이트 레진의 미세구조, 화학적 성분 및 결정, 자기 및 열적 특성 등을 분석하기 위해 SEM, EDS, VSM 및 TGA를 측정하였다. 샌더스트의 입도 크기 35 ㎛, 무게분율 40 wt.%를 분산시킨 레진의 유전손실 특성을 활용하여, X-band에서 약 1.51 GHz 대역폭에 대해 -10 dB 이하의 반사손실 성능을 발휘하는 단층형(t = 1.585 mm) RACC를 설계 및 제작하였다. 제작된 RACC의 초고온(25℃ to 1,000℃)에서 전자파 흡수 거동을 살피기 위해 개발된 초고온 환경 자유공간측정 장비를 활용하여 X-band 대역에서 그 성능을 검증하였다.

• 한국세라믹학회지
• /
• 제36권6호
• /
• pp.583-589
• /
• 1999

In the fabrication of ceramic chip couples for high frequency application such as the mobile communication equipment the formation of electrode lines and Ag diffusion were investigated with heat treatment conditions for removing organic binders. The deformation and densification of the electrode line greatly depended on the binder burnout process due to the overlapped temperature zone near 400$^{\circ}C$ of the binder dissociation and the solid phase sintering of the silver electrode. Ag ions were diffused into the glass ceramic substrate. The Ag diffusion was led by the glassy phase containing Pb ions rather than by the crystalline phase containing Ca ions. The fact suggests that the Ag diffusion could be controlled by managing the composition of the glass ceramic substrate.

• 한국안전학회지
• /
• 제11권4호
• /
• pp.107-114
• /
• 1996

A study to Improve the safety of the ceramic heat exchanger In the high temperature heat recovery system was performed in terms of air flow passes. The numerical and finite element analyses on the heat transfer and thermal stresses in the ceramic core related with air passes were carried out. The results showed that the stresses in the ceramic core induced by the thermal expansion are large enough to cause failure of the brittle ceramic core. The imployment of triple-pass air flow for the same ceramic core could increase the efficiency and effectively release approximately 20% of the maximum thermal stressess, thus improving the safety of the ceramic heat exchanger. The use of triple-pass, however, is limited by the amount of air flow due to the increase of pressure drop.

• 한국세라믹학회지
• /
• 제52권6호
• /
• pp.462-466
• /
• 2015

This paper reports the microstructure of hot-pressed $ZrB_2$-SiC ceramics with added $B_4C$ as characterized by transmission electron microscopy. $ZrB_2$ has a melting point of $3245^{\circ}C$, a relatively low density of $6.1g/cm^3$, and specific mechanical properties at an elevated temperature, making it a candidate for application to environments with ultra-high temperatures which exceed $2000^{\circ}C$. Due to the non-sinterability of $ZrB_2$-based ceramics, research on sintering aids such as $B_4C$ or $MoSi_2$ has become prominent recently. From TEM investigations, an amorphous layer with contaminant oxide is observed in the vicinity of $B_4C$ grains remaining in hot-pressed $ZrB_2$-SiC ceramics with $B_4C$ as an additive. The effect of a $B_4C$ addition on the microstructure of this system is also discussed.

• 한국세라믹학회지
• /
• 제52권5호
• /
• pp.320-324
• /
• 2015

Optimization of the fabrication process of NiO-yttrium doped barium zirconate (BZY) composite anode substrates using tape-casting for high performance thin-film protonic ceramic fuel cells (PCFCs) is investigated. The anode substrate is composed of a tens of microns-thick anode functional layer laminated over a porous anode substrate. The macro-pore structure of the anode support is induced by micron-scale polymethyl methacrylate (PMMA) pore formers. Thermal gravity analysis (TGA) and a dilatometer are used to determine the polymeric additive burn-out and sintering temperatures. Crystallinity and microstructure of the tape-cast NiO-BZY anode are analyzed after the sintering.

• 세라미스트
• /
• 제22권2호
• /
• pp.133-145
• /
• 2019

Thermoelectric energy conversion has attracted much attention because it can convert heat into electric power directly through solid state device and vice versa. Current research is aimed at increasing the thermoelectric figure of merit (ZT ) by improving the power factor and reducing the thermal conductivity. Although there have been significant progresses in increasing ZT of material systems composed of Bi, Te, Ge, Pb, and etc. over the last few decades, their relatively high cost, toxicity, and the scarcity have hindered further development of thermoelectrics to expand practical applications. In this paper, we review the current status of research in the fields of nanostructured thermoelectric materials with eco-friendly and low cost elements, such as skutterudites and oxides, for mid-high temperature applications, highlighting the strategies to improve thermoelectric performance.

• 한국전자파학회논문지
• /
• 제19권12호
• /
• pp.1402-1409
• /
• 2008

본 논문에서는 상대 유전율이 큰 low temperature co-fired ceramic 기판을 이용한 안테나의 복사 성능을 높이고, 대역폭을 개선하기 위하여 low temperature co-fired ceramic cavity backed 안테나가 제안된다. Low temperature co-fired ceramic cavity는 각 층의 접지면을 다수의 비어로 연결하여 만들어진다. 그리고, cavity의 크기가 안테나의 복사 성능과 대역폭 성능에 미치는 영향을 보여준다. 제안된 $2{\times}4$ low temperature co-fired ceramic cavity backed 안테나의 크기는 $10{\times}20\;mm^2$이며, $57{\sim}64\;GHz$ 대역에서 이득 $11.8{\sim}14.1\;dBi$, 대역폭 13 %(7.9 GHz)을 가진다. 측정 결과는 시뮬레이션 결과와 매우 잘 일치함을 보여준다.

• 에너지공학
• /
• 제5권2호
• /
• pp.138-145
• /
• 1996

The particulate collection at high temperature and high pressure (HTHP) is important on the advanced coal power generation system not only to improve the thermal efficiency of the system, but also to prevent the gas turbine from erosion and to meet the emission limits of the effluent gas. The specifications for particulate collection in those systems such as Integrated Coal Gasification Combined Cycle (IGCC) and Pressurized Fluidized Bed Combustion (PFBC) require the absolutely high collection efficiency and reliability. Advanced cyclone, granular bed filter, electrostatic precipitator, and ceramic filter have been developed for particulate collection on the advanced coal power generation system. However, rigid ceramic filters and granular bed filter among them show the best potential. The current technology of these collectors was evaluated in this paper. The experienced problems of these systems on performance, materials, and mechanical design were investigated. Ceramic candle filters has the best potential for IGCC at this moment because it has nearly the highest efficiency comparing with other filtering systems and has accumulated many reliable design data resulted from many field experiences.