• Current Photovoltaic Research
• /
• 제6권4호
• /
• pp.119-123
• /
• 2018

The High Performance Module With The Shingled String Has Several Advantages Such As The Larger Active Area, Higher Open-Circuit Voltage And Smaller Cell To Module (Ctm) Loss. To Obtain Increase Of Power In Pv Shingled Module, The Detailed Condition Of Various Parameters Related To Cutting And Bonding Process Were Investigated In This Study. We Searched The Optimized Cutting Conditions Of Laser Scan Speed, The Number Of Laser-Scribing And Also Bonding Conditions Of Electrically Conductive Adhesives (Eca) By Varying Amount Of Eca, Curing Time And Curing Temperature. The Shingled Pv Module Showed 25.4W of Maxmimum Power At 60 Rpm Of Dipensing Motor Speed, 30 Seconds Of Curing Time And $140^{\circ}C$ Of Curing Temperature, Respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권7호
• /
• pp.876-884
• /
• 2012

The worldwide CPV(Concentrated Photo Voltaic) market has been increased rapidly due to the increase in large-scale PV(Photo Voltaic) plants which are situated in sun-rich areas with either a Mediterranean or equatorial-type climate. CPV systems are arguably some of the most important devices in the production of electricity within regions with a sun-rich climate, particularly those which benefit from abundant direct solar irradiation. We have developed a 500X CPV module with rated power of 170Wp. The CPV module must satisfy the constraint of having a sensitive tracking accuracy due to the limited tolerance of the acceptance angle in intrinsic optical design. In this study, the module's acceptance angle used was designed with a tolerance angle of ${\pm}1^{\circ}$ in the secondary optics design. In general, non-concentrated module type 2-axis trackers have a tolerance angle larger than ${\pm}1^{\circ}$ due to standard silicon-type modules which are insensitive to the tracking accuracy of the sun. They have a tolerance angle of ${\pm}2{\sim}4^{\circ}$, which fails to exert a significant influence on the performance of the module. This paper provides a study of an experimental variation of the efficiency of the CPV module in terms of its tracking accuracy. Also, the performance of the module is studied from the perspective of temperature and direct irradiation.

• 전기학회논문지P
• /
• 제59권4호
• /
• pp.364-371
• /
• 2010

In this paper, we propose the landscape lighting power control system with solar sell generator equipment for energy saving, and also which is included the landscape lighting power transformation device. The power transformation device can check inverse current in the power of the solar cell module and control the power of the battery. And we present the design of landscape lighting power control system. The power control system uses microprocessor with charging system and power transformation device. And also it can control the power of loads under consideration intensity of illumination. The landscape lighting loads are composed of LED(Lighting Emitting Diode) and HID(High Intensity Discharge)lamps. To evaluate property, we installed the solar cell array which generate three kilo watt power. Experimental results show that the proposed system can have stability and energy saving on the mixed configuration of electric loads with DC and AC lamps.

• 전기전자학회논문지
• /
• 제18권3호
• /
• pp.356-361
• /
• 2014

This paper proposes hardware architecture of HEVC (high efficiency video coding) CABAC (context-based adaptive binary arithmetic coding) binarizer. The proposed binarizer was designed and implemented as an independent module that can be integrated into HEVC CABAC encoder. It generates each bin string of each syntax element in a single cycle. It consists of controller module, TU (truncated unary binarization) module, TR (truncated Rice binarization) module, FL (fixed length binarization) module, EGK (k-th order exp-Golomb coding) module, CALR (coeff_abs_level_remaining) module, QP Delta (cu_qp_delta_abs) module, Intra Pred (intra_chroma_pred_mode) module, Inter Pred (inter_pred_idc) module, and Part Mode (part_mode) module. The proposed binarizer was designed in Verilog HDL, and it was implemented in 45 nm technology. Its operating speed, gate count, and power consumption are 200 MHz, 1,678 gates, and 50 uW, respectively.

• Journal of Power Electronics
• /
• 제17권1호
• /
• pp.127-135
• /
• 2017

Recently the researches on modular multi-level converter (MMC) are being highlighted because high quality and efficient power transmission have become key issues in high voltage direct current (HVDC) systems. This paper proposes an improved pre-charging method for the sub-module (SM) capacitor of MMC-based HVDC systems, which operates in the nearest level control (NLC) modulation and does not need additional circuits or pulse width modulation (PWM) techniques. The feasibility of the proposed method was verified through computer simulations for a scaled 3-phase 10kVA MMC with 12 SMs per each arm. Hardware experiments with a scaled prototype have also been performed in the lab to confirm the simulation results.

• 전기학회논문지P
• /
• 제63권3호
• /
• pp.183-188
• /
• 2014

Power conversion systems used in large gas turbine power plant can be divided into two main part. Because of the initial start-up characteristic of the gas turbine combustor, the gas turbine must be accelerated by starting device(LCI : Load Commutated Inverter) up to 10%~20% of rated speed to ignite it. In addition, the ECS(Excitation Control system) is used to control the rotor field current and reactive power in grid-connected synchronous generator. These two large power conversion systems are located in the same space(container) because of coordination control. Recently, many manufactures develop high speed controller based on function block available in the LCI and ECS with the newest power semiconductor. We also developed high speed controller based on function block to be using these two system and it meets the international standard IEC61131 as using real-time OS(VxWorks) and ISaGRAF. In order to install easily these systems at power plant, main controller, special module and IO module are used with high speed communication line other than electric wire line. Before initial product is installed on the site, prototype is produced and tests are conducted for it. The performance results of Integrated controller and application program(SFC, ECS) were described in this paper. The test results will be considered as the important resources for the application in future.

• Journal of Power Electronics
• /
• 제14권4호
• /
• pp.661-670
• /
• 2014

A new DC/DC converter with zero voltage switching is proposed for applications with high input voltage and high load current. The proposed converter has two circuit modules that share load current and power rating. Interleaved pulse-width modulation (PWM) is adopted to generate switch control signals. Thus, ripple currents are reduced at the input and output sides. For high-voltage applications, each circuit module includes two half-bridge legs that are connected in series to reduce switch voltage rating to $V_{in}/2$. These legs are controlled with the use of asymmetric PWM. To reduce the current rating of rectifier diodes and share load current for high-load-current applications, two center-tapped rectifiers are adopted in each circuit module. The primary windings of two transformers are connected in series at the high voltage side to balance output inductor currents. Two series capacitors are adopted at the AC terminals of the two half-bridge legs to balance the two input capacitor voltages. The resonant behavior of the inductance and capacitance at the transition interval enable MOSFETs to be switched on under zero voltage switching. The circuit configuration, system characteristics, and design are discussed in detail. Experiments based on a laboratory prototype are conducted to verify the effectiveness of the proposed converter.

• 한국전기전자재료학회논문지
• /
• 제34권6호
• /
• pp.433-437
• /
• 2021

As the demand for new and renewable energy increases due to the depletion of fossil fuels, solar power generation, a core energy source for new and renewable energy, requires research on solar modules for high output power generation. In this paper, the electrical characteristics of solar cell strip at the edge and in the center of single-crystal silicon having a semi-square shape were analyzed. The cell strip located in the center showed the efficiency increase by 0.26% compared to the cell strip at the edge of the solar cell. A shingled photovoltaic module was manufactured for each cell strip. As a result, the output power of the module using the cell strip located in the center was higher by 0.992%.

• 전자공학회논문지
• /
• 제51권10호
• /
• pp.228-234
• /
• 2014

건설 중장비의 경우 유압기기 및 전장 배선 등으로 인하여 내부의 배선이 매우 복잡한 구조를 가지고 있으며, 이러한 복잡한 배선으로 인하여 장비의 생산 및 유지 보수에 많은 시간이 소요되고 있어 원가 상승 요인으로 작용한다. 본 논문에서는 건설 중장비의 전장 배선을 간소화하기 위한 고신뢰성을 갖는 PLC(Power Line Communication)-CAN(Controller Area Network) 통신 모듈을 설계하고 구현한다.

• 정보통신설비학회논문지
• /
• 제9권1호
• /
• pp.29-34
• /
• 2010

In this study, we realized the broadband home gateway system of dual mode based upon EDR 2~3Mbps transmission speed and 300Mbps of 802.11n, In broadcasting and telecommunication convergence networks to deliver multimedia services, high-quality home. The bluetooth module is designed to use general low rate data speed service and the 802.11n module also is designed to use high rate speed service at various home network situation. The dual mode home gateway system, bluetooth and 802.l1n module, is well realized for many specification such as emission power, spurious power, impedance matching, frequency channel test.