본 연구에서는 폴리에스테르 비닐과 고밀도 폴리에틸렌(HDPE)의 분해에서 수분 함량, pH, 연소시 무게에 대하여 조사하였다. 폴리에스테르 비닐은 30일 동안의 음식물 쓰레기의 미생물에 의하여 분해가 이루어졌으나, 고밀도 폴리에틸렌(HDPE)은 분해가 전혀 이루어지지 않았다. 폴리에스테르계 생분해성 비닐은 음식물의 미생물에 의하여 10일후에 급속하게 분해가 일어났으며, 그 결과 무게가 감소함을 나타내었다. 연소반응의 $300^{\circ}C{\sim}600^{\circ}C$ 사이에서는 완전연소가 이루어졌으며, 음식물 속의 미생물에 의한 분해로 인하여 pH는 4.26에서 7.6으로 증가하였다. 그리고 poly ester vinyl은 60일 동안의 운전에서 90% 이상의 분해가 이루어졌다.
Poly(ethylene-co-15.3 mole% octene) ($PEO_{15}$) - 1-옥텐 2성분계 혼합물과 $PEO_{15}$와 (에틸렌 + 1-옥텐) 혼합용매로 이루어진 3성분계 혼합물의 상거동을 $160^{\circ}C$와 1,000 bar의 영역까지 측정하였다. $PEO_{15}$ - 에틸렌 - 1-옥텐 혼합물에서 에틸렌의 함량이 증가함에 따라 cloud-point 곡선이 측정되는 압력이 급격하게 높아졌다. 에틸렌 함량이 18 wt% 보다 낮을 경우, $PEO_{15}$ -에틸렌 - 1-옥텐 혼합물에서 bubble-point 곡선과 cloud-point 곡선이 모두 관측되었다. 에틸렌 함량이 증가함에 따라 $PEO_{15}$ - 에틸렌 - 1-옥텐 혼합물에서 bubble-point 곡선이 관측되는 온도범위는 좁아졌으며, $PEO_{15}$ - 에틸렌 - 1-옥텐 혼합물이 단일상으로 존재하는 온도-압력 영역이 현저히 감소하였다. 에틸렌 함량에 따라 단일상 영역이 감소하는 것은 $PEO_{15}$와 (에틸렌 + 1-옥텐) 혼합용매 사이에 작용하는 분산인력이 줄어들기 때문이다. 에틸렌을 36 wt% 보다 적게 함유한 $PEO_{15}$ - 에틸렌 - 1-옥텐 혼합물의 단일상 영역은 온도가 높아짐에 따라 감소하였다. 이와는 대조적으로 에틸렌을 50 wt% 보다 많게 함유한 $PEO_{15}$ - 에틸렌 - 1-옥텐 혼합물의 단일상 영역은 온도가 녹아짐에 따라 증가하였다. $PEO_{15}$ 용해도를 낮추는 혼합용매 사이의 극성인력과 $PEO_{15}$ 용해도를 높이는 혼합용매의 밀도는 온도가 낮아짐에 따라 증가한다. 에틸렌 함량이 50 wt% 보다 많을 경우, 혼합용매들의 극성인력 효과가 밀도 효과보다 커서 온도가 낮아짐에 따라 cloud-point 압력은 증가하였다. 에틸렌 함량이 50 wt% 보다 적을 경우, 혼합용매들의 극성인력 효과가 밀도 효과보다 작아서 온도가 낮아짐에 따라 cloud-point 압력은 감소하였다.
지난 수십 년 동안, 외부 자극에 대한 응답성이 우수하면서도 인체에 적용할 수 있는 소프트 액추에이터 개발을 위한 많은 노력이 이어졌다. 본 연구에서는 동역학적 정밀 제어가 가능한 의료용 소프트 액추에이터를 개발하기 위해, 유해한 화학적 첨가제나 개시제 없이 방사선을 이용하여 전기 자극 반응성과 물리적 특성이 우수한 3차원 가교 구조의 poly(acrylic acid) (PAAc)/poly(vinyl alcohol) (PVA)/poly(ethylene glycol) (PEG) 하이드로겔을 합성하였다. 방사선 조사 후, 모든 하이드로겔은 75% 이상의 겔 분율을 나타내었고, 표면 반사 적외선 분광법을 통해 PAAc/PVA/PEG 하이드로겔이 성공적으로 합성되었음을 확인하였다. 또한 PAAc/PVA/PEG 하이드로겔의 겔 분율, 평형 수분 함량, 압축 강도를 측정하여 감마선의 총 조사 선량과 구성 성분의 함량비 조절에 따른 하이드로겔의 물리적 특성 변화를 확인하였다. 조사된 감마선의 선량이 증가하거나 poly(ethylene glycol) diacrylate (PEGDA)의 함량이 많을수록 PAAc/PVA/PEG 하이드로겔은 높은 가교 밀도와 우수한 기계적 강도를 나타내었다. 또한 PAAc/PVA/PEG 하이드로겔은 3 V의 저전압에서도 전기적인 자극에 반응하였고, 전기장 하에서 이동성 이온의 움직임에 따른 하이드로겔의 밴딩 거동은 하이드로겔의 가교 밀도, 이온기의 함량, 인가 전압 및 전해질 용액의 이온 농도 등을 조절함으로써 제어할 수 있음을 확인하였다.
A selection of commercially available poly(ethy1ene terephtha1ate) fibers with different degrees of molecular alignment and crystallinity have been investigated utilizing a wide range of techniques including optical microscopy, infrared spectroscopy together with thermal and wide-angle X-ray diffraction techniques. Annealing experiments showed increased molecular alignment and crystallinity as shown by the increased values of birefringence and melting enthalpies. Crystallinity values determined from thermal analysis, density, unpolarized infrared spectroscopy and X-ray diffraction are compared and discussed in terms of the inherent capabilities and limitations of each measurement technique. The birefringence and refractive index values obtained from optical microscopy are found to decrease with increasing wavelength of light used in the experiments. The wide-angle X-ray diffraction analysis shows that the samples with relatively low orientation possess oriented non-crystalline array of chains whereas those with high molecular orientation possess well defined and oriented crystalline array of chains along the fiber axis direction. X-ray analysis showed increasing crystallite size trend with increasing molecular orientation. SEM images showed micro-cracks on low oriented fiber surfaces becoming smooth on highly oriented fiber surfaces. Excellent bending characteristics were observed with knotted fibers implying relatively easy fabric formation.
본 연구는 달착륙선을 위한 하이브리드 추진 시스템의 기초 연구로서 동시 점화 및 산화제 유량 분배를 통한 클러스터링 연구를 수행하였다. 클러스터링 연소 실험을 위해 지상 연소 실험 시스템을 구축하였으며, 산화제와 연료는 각각 기체 산소(gas oxygen)와 고밀도 폴리에틸렌(High Density Poly Ethylene)을 사용하였다. 실험 결과 화약 점화를 사용한 동시 점화 장치는 동일한 시점에 점화가 되었으며, 유량 분배 장치를 통해 비교적 균일하게 산화제 분배가 이루어져 각 연소실 내에서의 압력이 비교적 동일하게 나타난 것을 확인하였다.
This paper reports solution-processed, high-efficiency organic light-emitting diodes (OLEDs) fabricated by a knife coating method under ambient air conditions. In addition, indium tin oxide (ITO), traditionally used as the anode, was substituted by optimizing the conductivity enhancement treatment of poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) films on a polyethylene terephthalate (PET) substrate. The transmittance and sheet resistance of the optimized PEDOT:PSS anode were 83.4% and $27.8{\Omega}/sq$., respectively. The root mean square surface roughness of the PEDOT:PSS anode, measured by atomic force microscopy, was only 2.95 nm. The optimized OLED device showed a maximum current efficiency and maximum luminous density of 5.44 cd/A and $8,356cd/m^2$, respectively. As a result, the OLEDs created using the PEDOT:PSS anode possessed highly comparable characteristics to those created using ITO anodes.
We investigated the effect of ionic component on crystalline morphology development during isothermal annealing in a sodium neutralized sulfonated poly(ethylene terephthalate) ionomer (Ion-PET) by time-resolved small-angle x-ray scattering (TR-SAX S) using synchrotron radiation. At early stage in Ion-PET, SAXS intensity at a low annealing temperature (Ta = 120 $^{\circ}C)$ decreased monotonously with scattering angle for a while. Then SAXS profile showed a peak and the peak position progressively moved to wider angles with isothermal annealing time. Finally, the peak intensity decreased, shifting the peak angle to wider angle. It is revealed that ionic aggregates (multiplets structure) of several nm, calculated by Debye-Bueche plot, are formed at early stage. They seem to accelerate the crystallization rate and make fine crystallites without spherulite formation (supported by optical microscopy observation). From decrease of peak intensity in SAXS,it is suggested that new lamellae are inserted between the preformed lamellae so that the concentration of ionic multiplets in amorphous region decreases to lower the electron density difference between lamellar crystal and amorphous region. In addition, analysis on the annealing at a high temperature (Ta = 210 $^{\circ}C)$ by optical microscopy, light scattering and transmission electron microscopy shows a formation of spherulite, no ionic aggregates, the retarded crystallization rate and a high level of lamellar orientation.
본 연구는 달 탐사 적용을 위한 하이브리드 추진 시스템의 기초 연구로서 산화제 유량 제어를 통한 추력제어 연구를 수행하였다. 산화제 유량 제어를 위해 볼밸브(ball valve)와 스텝 모터(stepping motor)를 이용하여 유량 제어 시스템을 구축하였으며, 산화제 및 연료는 각각 기체 산소(gas oxygen)와 고밀도 폴리에틸렌(High Density PolyEthylene)을 사용하였다. 실험 결과 산화제 유량 제어를 통해 목표 추력 제어 비율(53%, 32%)로 추력제어가 이루어 졌으며, 각각의 구간 내에서 추력이 일정하게 유지 되는 것을 확인 하였다.
Lithium-sulfur batteries (LSBs) have emerged as a promising alternative to lithium-ion batteries (LIBs) owing to their high energy density and economic viability. In addition, all-solid-state LSBs, which use solid-state electrolytes, have been proposed to overcome the polysulfide shuttle effect while improving safety. However, the high interfacial resistance and poor ionic conductivity exhibited by the electrode and solid-state electrolytes, respectively, are significant challenges in the development of these LSBs. Herein, we apply a poly (ethylene oxide) (PEO)-based composite solid-state electrolyte with oxide Li7La3Zr2O12 (LLZO) solid-state electrolyte in an all-solid-state LSB to overcome these challenges. We use an electrochemical method to evaluate the degradation of the all-solid-state LSB in accordance with the carbon content and loading weight within the cathode. The all-solid-state LSB, with sulfur-carbon content in a ratio of 3:3, exhibited a high initial discharge capacity (1386 mAh g-1), poor C-rate performance, and capacity retention of less than 50%. The all-solid-state LSB with a high loading weight exhibited a poor overall electrochemical performance. The factors influencing the electrochemical performance degradation were revealed through systematic analysis.
The intermediate mixing chamber is one of various methods for improving the regression rate and combustion efficiency of the hybrid rocket. The mixing chamber with its non-combustible material makes the propulsion performance increase, but it leads to a low fuel-loading density in the combustion chamber; therefore, this performance-related trade-off between the mixing chamber and the low fuel-loading density was studied. In this study, the trade-off was conducted by comparing the intermediate-mixing-chamber case with a w/o-mixing-chamber case. The small hybrid-sounding rocket is designed with internal ballistics for comparing the rocket length to the weight. In addition, an external ballistic analysis was conducted for comparing the performances of the w/- and w/o-mixing-chamber cases. As a result, the intermediate-mixing-chamber case shows that the length and the weight were decreased to 12 % and 8 %, respectively; furthermore, when compared with the normal cases, the estimated altitude result of the w/-mixing-chamber case was increased to approximately 75 m.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.