• Journal of Environmental Science International
• /
• v.16 no.2
• /
• pp.143-149
• /
• 2007

The effect of precoating of silica with polyamine surfactants on the adsorption of five model compounds containing asphalt-like functionalities was studied. Hexadecyltrimethylammonium chloride (HDTMA) and 1-hexadecylamine were used for silica precoating. The model compounds representing five asphalt functionalities were benzoic acid, phenol, benzylbenzoate, benzophenone, and quinoline. All the adsorption isotherms conformed well to the Langmuir adsorption model. All the model compounds showed decreased adsorption with the HDTMA precoating. However, two acidic compounds, benzoic acid and phenol, showed enhanced adsorption on the silica precoated with 1-hexadecylamine. In aqueous solutions, the adsorption of the acidic compounds were in the following order: silica precoated with 1-hexadecylamine > silica precoated with HDTMA > uncoated silica.

• Journal of the Korean Ceramic Society
• /
• v.41 no.1
• /
• pp.41-44
• /
• 2004

Hydrophilicity and hydrophobicity of pottery bodies can be controlled via chemical substitution of layered clay with hydrophilic and hydrophobic organics. In this study, organo-clay nanocomposites were prepared by ion-exchange of montmorillonite with dodecylamine and hexadecylamine, respectively. Substitution sites of organics and the interval changes of layered materials are characterized by FT-IR and WAXD and organics amounts loaded and water comtents contained by C/S analysis and TG-DSC. The organics were selectively intercalated so that increase layer interval from 12${\AA}\; to\;16{\AA}$. Organo-modified clay is changed to more hydrophobic comparing to clay itself.

• Journal of Powder Materials
• /
• v.15 no.3
• /
• pp.210-213
• /
• 2008

Elongated CdSe nanoparticles with a diameter of 3-7nm have been successfully synthesized using two surfactants of trioctylphospine (TOP) and hexadecylamine (HDA) at $160^{\circ}C$. The formation of elongated CdSe nanoparticles is possibly due to the cooperative effects from both the different binding capability of two surfactants (TOP and HDA) and intrinsically anisotropic crystal structure of the CdSe. The electron diffraction pattern of CdSe nanoparticles revealed the formation of wurzite phase. The CdSe samples showed red-shifted wavelength from 560 to 580nm with increasing the refluxing time due to the gradual growth of CdSe nanoparticles. The relatively broad absorption band can be attributed to the surface state of CdSe nanoparticles. The possible formation mechanism of elongated CdSe nanoparticles was proposed and the characteristics of CdSe have been discussed as well.

• Macromolecular Research
• /
• v.12 no.1
• /
• pp.38-45
• /
• 2004

A highly flexible polyimide (PI) was synthesized successfully from ethylene glycol bis(anhydrotrimellitate) (TMEG) and 1,3-bis(4-aminophenoxy)benzene (TPER) for its application in electronics. To enhance the thermal stability and mechanical properties of this novel PI, we prepared PI nanocomposite films using nanoparticles of clays that had been treated with organic intercalating agents (organoclays). We used two types of organoclays: montmo-rillonite (MMT) treated with hexadecylamine (C$\_$16/) and MMT treated with dimethyl dihydrogenated tallow quaternary ammonium (l5A). PI/organoclay hybrid films were obtained by first preparing poly(amic acid) (PAA)/organoclay films and then converting the PAA to polyimide by thermal conversion. PAA was characterized by FT-IR and $^1$H-NMR spectroscopy and the conversion of PAA to PI was confirmed by FT-IR spectroscopy. We analyzed the dispersion of the organoclays in the PI film by X-ray diffraction. The thermal stability and mechanical properties of the hybrid films were also investigated.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.379.1-379.1
• /
• 2016

Recently, new types of wearable devices such as textile electronics are considered as the next generation wearable electronics. To realize the textile electronics, conductive fibers are required to supply the power and for signal processing. Conventionally, silver nanowires (Ag NWs) have been attracted as one of the conductive additives in the fibers, however, using the Ag NWs may lead to high production cost since it is a noble metal. Many researches have been done to replace the Ag NWs into a cheaper materials such as copper nanowires (Cu NWs). Here, we synthesized ultra-long Cu NWs for a conductive filler material in conductive fibers, taking advantages of their structural features. To investigate the effect of capping agents on the aspect ratio of the synthesized Cu NWs, we used various capping agents such as hexadecylamine, butylamine, ethylenedilamine and oleylamine in the Cu NW synthesis. In this research, the effects of capping agents on the structure and the synthesis of Cu NWs are presented.

• Polymer(Korea)
• /
• v.26 no.3
• /
• pp.381-388
• /
• 2002

The properties of polyurethane (PU) nanocomposites with organoclay have been compared in terms of their thermo-mechanical properties, morphology, and gas permeability. Hexadecylamine-montmorillonite ($C_{16}$-MMT) was used as an organoclay to make PU hybrid films. The properties were investigated as a function of organoclay content (1-4 wt%) in the PU matrix. Transmission electron microscopy (TEM) photographs showed that most clay layers were dispersed homogeneously into the matrix polymer in nano-scale, although some particles of clay were agglomerated. We also found that the addition of only a small amount of organoclay was enough to improve the thermal stabilities and mechanical properties of PU hybrid films while gas permeability was reduced. Even at low organoclay content (<5 wt%), the PU nanocomposite showed much better thermo-mechanical properties, and lower gas permeability than pure PU.

• Korean Chemical Engineering Research
• /
• v.46 no.2
• /
• pp.436-442
• /
• 2008

Organic-inorganic hybrid mesoporous anion-exchange resins were prepared for the adsorption of anions from aqueous solutions. The prepared samples were characterized using nitrogen adsorption-desorption measurements, Fourier transform infrared (FTIR) spectroscopy, and elemental analyses. Batch and kinetic experiments were performed to examine the anion-exchange performances of the prepared samples. Among the prepared samples, the hybrid mesoporous anion-exchange resins functionalized with tributylammonium groups showed higher adsorption capacities for perrhenate ions than did the resin functionalized with trimethylammonium groups. The surfactant, hexadecylamine, which had hydrophobic alkyl chains, also showed affinity for hydrophobic perrhenate anions.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.7
• /
• pp.2207-2211
• /
• 2011

Colloidal cadmium telluride (CdTe) quantum dots (QDs) and their nanoparticles have been synthesized by one pot sonochemical reactions under multibubble sonoluminescence (MBSL) conditions, which are quite mild and facile compared to other typical high temperature solution-based methods. For a typical reaction, $CdCl_2$ and tellurium powder with hexadecylamine and trioctylphosphine/trioctylphosphineoxide (TOP/TOPO) as a dispersant were sonicated in toluene solvent at 20 KHz and a power of 220W for 5-40 min at 60 $^{\circ}C$. The sizes of CdTe particles, in a very wide size range from 2 nm-30 ${\mu}m$, were controllable by varying the sonicating and thermal heating conditions. The prepared CdTe QDs show different colors from pale yellow to dark brown and corresponding photoluminescence properties due mainly to the quantum confinement effect. The CdTe nanoparticles of about 20 nm in average were found to have band gap of 1.53 eV, which is the most optimally matched band gap to solar spectrum.

• Polymer(Korea)
• /
• v.37 no.2
• /
• pp.218-224
• /
• 2013

Graphene oxide (GO) was prepared by the Hummers and Offeman method from graphite. Two different types of functionalized graphene sheets (FGSs) were synthesized by using GO. Hexamethylamine (HDA) substituted vertically to the graphene sheet (Ver-HDA-GS) was synthesized from HDA and epoxy group in GSs. Whereas, horizontally substituted hexadecanol (HDO) to the GS(Hor-HDO-GS) was synthesized from HDO and alcohol groups via reduced GO (RGO), respectively. The structures of the GO, RGO, Ver-HDA-GS, and Hor-HDO-GS were identified by Fourier transform infrared (FTIR). In addition, we examined the thermal stability and morphology. Atomic force microscope (AFM) disclosed that Ver-HDA-GS consisted of one- or two-layer graphene regions. However, the Ver-HDA-GS layers showed average thickness of 1.76 nm. The thermal stabilities of the FGSs were better than those of the GO and RGO. The Ver- HDA-GS was well dispersed in common solvents such as dimethyl sulfoxide (DMSO), toluene, chloroform, and decalin.

• Journal of Pharmaceutical Investigation
• /
• v.39 no.6
• /
• pp.393-400
• /
• 2009

PHEA (hydroxyethyl-aspartamide)-mPEG (methoy-polyethyleneglycol)-$C_{16}$ (hexadecylamine)-ED (ethylenediamine) was prepared as a drug delivery carrier. The structure and molecular weight of polymers were characterized by $^1H$-NMR and gel permeation chromatography. Micelle size and shape were measured by electro-photometer light scattering and transmission electron microscope. The mean diameter of micelles was 23 nm in aqueous solution. To evaluate the potential of these polymeric micelles as a drug carrier, PSI-mPEG-$C_{16}$-ED was conjugated with Cy5.5 for Near-Infrared Fluorescent (NIRF) based optical imaging. PSI-mPEG-$C_{16}$-ED-Cy5.5 was injected intravenously into mice (n=5) and in vivo NIRF imaging was performed during 48 h after injection. The biodistribution study at 24 h after injection showed the longcirculation property of PSI-mPEG-$C_{16}$-ED-Cy5.5. Therefore, PSI-mPEG-$C_{16}$-ED micelles could be a promising drug carrier and imaging agent.