• 제목/요약/키워드: Heavy Equipment

검색결과 493건 처리시간 0.024초

BIM을 적용한 건설공사 중장비 투입 계획 방안 (Heavy Equipment Management Plan for BIM-Based Construction Project)

  • 강경환;김상환;김재준
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2010년도 춘계 학술논문 발표대회 1부
    • /
    • pp.171-174
    • /
    • 2010
  • Recently, our construction industry progress using the BIM system in the construction designing part. However, there are not preparing government policy about BIM even if there are many good things using BIM system on planning of heavy equipment. Therefore, planning for a input system of heavy equipment using BIM will be a kind of first challenge in this part. However, we've tried using strength point of BIM system to make better condition of our construction fields. So this study will be expected to shorten the construction time and using heavy equipment effectively.

  • PDF

선박용 프로펠러 주조시 수축결함 제어용 압탕가열장치 적용 (Application of the Riser Heating Equipment to Control Shrinkage defects for Casting of the Propeller)

  • 문현준;김정섭;박태동;이동조;윤석환
    • 한국주조공학회지
    • /
    • 제28권2호
    • /
    • pp.74-78
    • /
    • 2008
  • An integrated riser heating equipment has been developed to control shrinkage defects originated from casting of a marine propeller. The integrated riser heating equipment is composed of up/down moving parts, heating power source parts and an integrated controller. Heat capacity putting into the riser was calculated quantitatively on the base of a heat transfer analysis, which consisted of the establishment of heating model and the theoretical analysis for heat transfer. The riser heating equipment was evaluated through arc heating and electro-slag heating method. With the results, the arc type heating method was selected by considering high thermal efficiency, inexpensive cost, and convenient workship. This equipment improves the quality of a propeller casting and the poor working environment.

The Use of Noise Dampening Mats to Reduce Heavy-Equipment Noise Exposures in Construction

  • Saleh, Sabah;Woskie, Susan;Bello, Anila
    • Safety and Health at Work
    • /
    • 제8권2호
    • /
    • pp.226-230
    • /
    • 2017
  • The performance of sound barriers was evaluated to determine their technical effectiveness and practicality in reducing noise exposures to operating engineers in construction. Commercially purchased sound dampening mats (SDMats) were installed inside three heavy-equipment engine compartments. Sound pressure levels (SPLs) were measured before and after installing the SDMats while the equipment was on idle and full-throttle settings where it normally operates. SPLs inside the heavy-equipment operator cabs were significantly reduced by 5.6-7.6 dBA on the full-throttle setting following installation of the SDMats (p < 0.01). The evaluated engineering control intervention was simple to install, affordable, and substantially reduced the engine noise reaching the heavy-equipment operator, potentially reducing reliance on hearing-protection devices to protect construction workers from noise exposures.

EVALUATING MANAGEMENT STRATEGIES THROUGH ECONOMIC MODELING OF HEAVY EQUIPMENT FLEETS

  • Tyler Johnson;John Hildreth;Scott Capps
    • 국제학술발표논문집
    • /
    • The 5th International Conference on Construction Engineering and Project Management
    • /
    • pp.219-225
    • /
    • 2013
  • State transportation agencies utilize fleets of heavy equipment to construct and maintain roadways. Equipment cost models can be developed to forecast economic life, which is the point at which the average unit cost to date reaches a minimum. A calculated economic life and cost models can be used to quantify the impacts of management strategies applied to a fleet. The purpose of this research was to develop an accurate method of quantifying the results of management strategies applied to a fleet of heavy construction equipment. The strategies evaluated are related to the annual usage of the fleet and the size of the fleet. More specifically the methodology is used to adjust the economic model to consider a limit to the annual decline in machine usage and a reduction in the number of machines in the fleet. When limiting annual machine usage, a specified rate is applied to the usage of the fleet, while total usage is held constant. This causes aging at a modified rate. A reduction in fleet size also causes a change to the usage of a fleet as the fleet must use fewer machines to produce the same total usage.

  • PDF

중장비 붐을 가공하기 위한 특수 공구의 개발 (Development of Special Tool of Boom for Heavy Equipment)

  • 정황영;송두상;홍준희
    • 한국생산제조학회지
    • /
    • 제25권2호
    • /
    • pp.149-155
    • /
    • 2016
  • The purpose of this study is to develop special tools used to extend the tool life for the boom of heavy equipment. The boom of heavy equipment is manufactured by cutting the inner and outer surface with respect to the assembly site essential. In particular, when cutting the inner surface, entry of the tool is difficult owing to the limited size of the inner diameter and non circular cutting. In addition, the productivity is poor because the use of the cutting tool made of the SKH material. Therefore, it is necessary to develop a special tool for machining heavy equipment boom to extend tool life and to improve productivity. The special tool developed this study has the form of a holder and tip. The tip was created by applying a commercially available tungsten carbide insert.

컴퓨터비전을 활용한 건설현장 중장비의 단독작업 자동 인식 모델 개발 (Solitary Work Detection of Heavy Equipment Using Computer Vision)

  • 정인수;김진우;지석호;노명일
    • 대한토목학회논문집
    • /
    • 제41권4호
    • /
    • pp.441-447
    • /
    • 2021
  • 건설현장에서는 수많은 중장비와 작업자가 다양한 작업을 동시다발적으로 수행하기 때문에 복잡하고 위험한 상황이 자주 발생한다. 복잡한 현장에서 중장비가 단독으로 작업할 경우 운전자의 시야제한, 판단오류 등으로 인해 안전사고가 발생할 수 있으며, 이에 따라 중장비는 신호수와의 상호작용을 통해 주변 상황에 대한 정보를 수집하면서 작업을 수행해야 한다. 중장비를 자동으로 모니터링하고 위험상황을 탐지하기 위해 많은 컴퓨터비전 기술들이 개발되었지만, 기존의 방법들은 중장비 단독작업 인식에 필요한 중장비와 신호수 간 상호작용을 고려하지 않았다는 한계가 있다. 이러한 한계를 보완하기 위해 본 연구는 중장비-신호수 간의 상호작용을 고려한 컴퓨터비전 기반 중장비의 단독작업 자동 인식 모델을 제안함을 목표로 한다. 개발된 모델을 검증하기 위해 실제 건설현장으로부터 영상 데이터를 수집하여 실험을 수행하였다. 그 결과, 학습된 모델은 중장비와 사람을 83.4 %의 정확도로 인식하였고, 일반 작업자와 신호수를 84.2 %의 정확도로 분류하였으며, 중장비-신호수 간 상호작용 또한 95.1 %의 높은 정확도로 분석하였다. 본 연구결과는 건설현장에서 위험한 상황을 초래할 수 있는 중장비의 단독작업을 사전에 탐지하여 안전사고를 예방할 수 있다.

Marble wastes as amendments to stabilize heavy metals in Zn-Electroplating sludge

  • Riahi, Khalifa;Chaabane, Safa;Thayer, Bechir Ben
    • Advances in environmental research
    • /
    • 제6권1호
    • /
    • pp.15-23
    • /
    • 2017
  • Powdered marble wastes (PMW) generated by Utique marble cutting industries (North of Tunisia) with abundant amounts were used in this study as low-cost materials to investigate the stabilization of heavy metals (Pb, Zn, Fe) in sludge generated from a local Zn-Electroplating factory. Powdered marble wastes were evaluated by means of chemical fractions of heavy metals in sludge and concentrations of heavy metals in leachate from columns to determine their ability to stabilize heavy metals in contaminated sludge. Results indicated that chemical fractions of heavy metals in sludge were affected by application of the PMW mineral materials and pH, however, the effects varied with heavy metals. Application of the powdered marble wastes mineral materials reduced exchangeable metals in the sequence of Pb (60.5%)>Fe (40.5%)>Zn (30.1%). X-ray diffraction and hydro-geochemical transport code PHREEQC analysis were successfully carried out to get a better understanding of the mechanisms of reactive mineral phases involved in reduced exchangeable heavy metals in sludge after PMW material amendments. Therefore, metal immobilization using powdered marble wastes materials is an effective stabilization technique for industrial metallic hydroxide sludge.

건설 중기계 운영상의 안전관리 실태 및 개선방안 - 크레인, 지게차, 버킷굴삭기, 승강기, 펌프카를 중심으로 - (The Current Status and Improvement Scheme of Safety Management on the Heavy Construction Equipment Operation)

  • 강창희;신갑철;김상태;김용수
    • 한국건설관리학회:학술대회논문집
    • /
    • 한국건설관리학회 2002년도 학술대회지
    • /
    • pp.397-400
    • /
    • 2002
  • 본 연구는 건설 중기계(크레인, 지게차 버킷굴삭기, 승강기, 펌프카)를 중심으로 안전관리의 실태를 조사하고 개선방안을 제시하고자 한다. 이를 위해 먼저 건설 중기계에 대한 국내 건설산업재해에 대하여 조사${\cdot}$분석하고 이를 바탕으로 재해원인을 분석한다. 다음으로 설문조사를 통하여 안전관리 실태를 조사${\cdot}$분석한 후 개선방안을 제시한다. 본 연구의 결과를 요약하면 다음과 같다. 1) 중기계의 안전관리 실태는 작업적인 측면에서는 안전모 미착용, 관리적인 측면에서는 작업수칙의 불이행, 그리고 인적인 측면에서는 작업전 사전준비 불충분이 중요한 문제점으로 나타났다. 2) 개선방안으로는 작업전 5분안전교육의 강화, 크레인 작업시 낙하물에 대한 안전조치강화, 그리고 작업전 충분한 사전준비가 필요하다.

  • PDF

On-Site Treatment of Soil Contaminated by Heavy Metals and Petroleum using Relocatable Soil Washing Equipment

  • Kim, Taeeung
    • International journal of advanced smart convergence
    • /
    • 제9권1호
    • /
    • pp.19-28
    • /
    • 2020
  • We studied the on-site treatment of soil contaminated by heavy metals and petroleum was tested using relocatable soil washing equipment for greater remediation efficiency. Different combinations of pH and solid/liquid ratio were tested to determine the optimum balance, settling on values of 5 and 1:2, respectively. Next, soils containing Pb, Hg, and petroleum were further tested to assess the optimum number of washing cycles. The remediation efficiency of Pb and Hg in soil contaminated solely by heavy metals was 90.1% and 86.4% after three and two washings, respectively. The remediation efficiency of petroleum in soil contaminated solely by petroleum was 98.8% after one washing. When soil contaminated by both heavy metals and petroleum was cleaned, up to 91.0% of Pb, 86.9% of Hg, and 96.1% of petroleum was removed after two, one, and one washings, respectively. We conducted all remediation efficiencies and concentration reductions satisfied the standard threshold for soil contamination in South Korea.

3D Ground Terrain Processing Platform for Automated Excavation System

  • Kim, Seok;Kim, Tae-yeong;Park, Jae-Woo
    • 국제학술발표논문집
    • /
    • The 6th International Conference on Construction Engineering and Project Management
    • /
    • pp.669-670
    • /
    • 2015
  • Efficient management of the construction heavy equipment is required to reduce the rate of carbon emissions and on-site accidents. The intelligent excavation system (IES) will improve the construction quality and productivity through information technologies and efficient equipment operation, especially in large earthwork projects. Three-dimensional digitized ground data should be required for identifying the path of heavy equipment and work-site environment. Rapid development of terrain laser scanners (TLS) is more readily to acquire the digital data. This study suggests the '3D ground terrain processing platform (3DGTPP)' including data manipulating module and analyzing module of the scanned data for intelligent earthmoving equipment operation. The processing platform consists of six modules, including scanning, registering, manipulating, analyzing, transmitting, and storing. 3D ground terrain processing platform presented in this study will provide fundamental information for intelligent excavation system (IES), which will increase the efficiency of earthworks and safety of workers in significant.

  • PDF