Browse > Article
http://dx.doi.org/10.7735/ksmte.2016.25.2.149

Development of Special Tool of Boom for Heavy Equipment  

Jeong, Hwang-Young (Dept. of Mechanical Engineering, Graduate School, Daejeon Chungnam National University)
Song, Doo-Sang (Dae-Myung Tech., Dae-Myung Tech.)
Hong, Jun-Hee (Dept. of Mechanical Engineering, Chungnam National University)
Publication Information
Journal of the Korean Society of Manufacturing Technology Engineers / v.25, no.2, 2016 , pp. 149-155 More about this Journal
Abstract
The purpose of this study is to develop special tools used to extend the tool life for the boom of heavy equipment. The boom of heavy equipment is manufactured by cutting the inner and outer surface with respect to the assembly site essential. In particular, when cutting the inner surface, entry of the tool is difficult owing to the limited size of the inner diameter and non circular cutting. In addition, the productivity is poor because the use of the cutting tool made of the SKH material. Therefore, it is necessary to develop a special tool for machining heavy equipment boom to extend tool life and to improve productivity. The special tool developed this study has the form of a holder and tip. The tip was created by applying a commercially available tungsten carbide insert.
Keywords
Boom of heavy equipment; Chip breakers; Insert tip type; Inner surface; Outer surface;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Shim, Y. B., 1992, Optimum Thickness of Boom Plate of Excavator, A Thesis for a Master, Busan National University, Republic of Korea.
2 Joung, K. W., 2015, Monthly Heavy Equipment News, Magazine, Republic of Korea.
3 Grum, J., 2008, Fundamentals of Machining and Machine Tools, International Journal Of Microstructure And Materials Properties, 3:2/3 469-470.   DOI
4 Kim, J. H., 1995, A Study on Optimum Design of an Excavator Boom for Both Size and Shape, A Thesis for a Master, KAIST, Republic of Korea.
5 Jung, T. G., 1995, Study on Boom Oscillation Suppression of a Hydraulic Excavator, A Thesis for a Master, Changwon National University, Republic of Korea.
6 Bong, S. Y., Seong, K., Joh, J. S., 2010, A Study on Suppression of Vibration Caused by Quick-stop Operation of Hydraulic Excavator Boom, International Journal of the Korean Society for Precision Engineering, 27:12 33-40.
7 Joo, H., 1994, A Study on Optimum Design of an Excavator Boom for Shape, A Thesis for a Master, Busan National University, Republic of Korea.
8 Jeon, Y. K., 1997, The Stress Analysis of Boom for Pump-car, A Thesis for a Master, Kunsan National University, Republic of Korea.
9 So, S. H., 2013, Structural Analysis of Overloaded Multi-aerial Platform, J. Korean Soc. Manuf. Technol. Eng., 22:6 901-907.   DOI
10 Youn, H. C., Woo, C. K., Hwang, J. K., 2015, Investigation of the Cause of High Vibration in a Low Pressure Turbine Casing With Manufacturing Defects by Frequency Response Analysis, J. Korean Soc. Manuf. Technol. Eng., 24:4 463-468.   DOI
11 Kang, S. I., Kim, J. H., 2016, Development of Low-vibration Controller for Ultra-precision Dual Stage, J. Korean Soc. Manuf. Technol. Eng., 25:1 75-82.   DOI