• Journal of Energy Engineering
• /
• v.8 no.4
• /
• pp.540-545
• /
• 1999

The classical Fourier heat conduction equation is invalid at temperatures near absolute zero or at very early times in highly transient heat transfer processes. In such situations, a hyperbolic equation model for heat conduction based on the modified Fourier law is introduced because the wave nature of heat propagation becomes dominant. The Fourier model and the hyperbolic model for heat conduction are analyzed by using the Green's function technique together with the integral transform. Analytical expressions for the heat flux and temperature distributions in a finite slab subjected to a periodic surface heating at one of its surfaces are presented and the results obtained from each model are compared with each other. The thermal wave implied b the hyperbolic model is shown to travel through a medium and to reflect back toward the origin at the other insulated surface. On the other hand, the heat by the Fourier model propagates at an infinite speed instantaneously after a thermal disturbance is felt throughout the medium.

• Resources Recycling
• /
• v.25 no.6
• /
• pp.3-12
• /
• 2016

In this study, Au distribution in F-PGA chip and W-BGA chip were examined to recover Au effectively from CPU chips. The result showed that 80.8% and 89.8% of Au exist in terminal of F-PGA chip and bare die of W-BGA chip, respectively. Based on the fact that Au exists in specific parts of the chips, an CPU chip dismantling apparatus was developed. The experimental variables were roller rotating speed, heat temperature of IR heater and heating time. Terminals of F-PGA chips were completely recovered under the temperature of $300^{\circ}C$ and the residence time of 90 s. Bare dies of W-BGA chips were completely recovered as well under the temperature of $300^{\circ}C$, the roller rotating rate of 90 rpm and the residence time of 90 s.

• The Journal of Fisheries Business Administration
• /
• v.52 no.2
• /
• pp.55-67
• /
• 2021

Global warming affects critical natural resources, one of which is the oceans that occupy 70% of the total cover of the earth. In other words, ocean warming is a subset of global warming which needs to be addressed urgently. Purple laver (pyropia spp.) is one of the most vulnerable items to climate change although it is a major export product of Korean fisheries. The purpose of this study is to analyze the causality of how climate change caused by global warming affects the increase or decrease of PLP (purple laver production). The target area for analysis was set to Maro-hae between Jindo-gun and Haenam-gun. We selected marine environmental factors and meteorologic factors that could affect PLP as variables, as well as co-integration tests to determine long-term balance, and the Granger causticity tests. As a result, PLP and marine environmental factors WT (water temperature), pH, and DO confirmed that long-term equilibrium relationships were established, respectively. However, there is only causality with WT and it is confirmed that there is only a correlation between pH and DO (dissolved oxygen). There was no long-term equilibrium relationship between PLP and HDD (heating degree days) and there is a causal effect that HDD affects PLP; however, it was less clear than that of WT. The relationship between PLP and RF (rainfall), WS (wind speed), SS (percentage of sunshine), and FF (farm facilities) was all balanced in the long term, and causality exists. Based on the results of the analysis, policy proposals were made.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.4
• /
• pp.267-272
• /
• 2018

Today, SNS exists as the most influential medium. A variety of designs are being produced in the context of numerous SNS marketing designs and the increasing exposure of ads to SNS and portal sites. Recognizing the current status of sns advertising design, which is heating up more than a decade ago, we will study strategies to introduce an important part of education to be conducted in universities and the current way in which it is used and produced. Modern SNS marketing designs include promotional posters, card news, and banner ads, and are evolving into various forms and content that are combined with advertisements. In communicating or sharing information, the importance of real-time advertising product work and the saving of caustic costs are important. This requires a diversification of university education, as well as a change in quality and speed of production. When the graduates of SNS Design Production Education Development Plan and design work were carried out, they conducted a study on the education section where real-time work is possible to proceed to the industrial field. Through this research, we would like to consider the development of SNS marketing design personnel and the practical implications of training methods.

• Journal of Aerospace System Engineering
• /
• v.13 no.1
• /
• pp.18-28
• /
• 2019

High speed vehicles are subjected to high thermal loadings due to aerodynamic heating during ascent and reentry. Since a thermal protection system panel is mechanically constrained, it may cause thermal buckling under excessive thermal loadings. The thermal buckling could disturb the field of flow and make aerodynamic characteristics unstable. It is thus necessary to design the thermal protection system panel to prevent thermal buckling. This study defines the analytical model of temperature distribution using the finite difference method for the thermal protection system panel with large temperature differences inside and outside. This paper proposes the approximate model of the thermal buckling characteristics for the thermal protection system panel through the use of the Ritz method. The validity of the present method was verified by comparing the results of the finite element analysis. Furthermore, this research performs the parametric analysis of the thermal buckling characteristics for the thermal protection system panel by using the approximate model.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.3
• /
• pp.187-194
• /
• 2019

The off-axis Infra-Red(IR) seeker is mounted on the nose cone side of the anti-air high speed missile to alleviate thermal shield effect due to aerodynamic heating. The seeker output can not be regarded as the Line-of-Sight(LOS) rate any more as missile's roll motion to keep the target tracking is associated. In this paper, we propose a method to calculate the LOS rate for off-axis seeker on a 2-axis gimbal. Firstly, true LOS rate equations are analytically derived but not implementable because boresight error rate is not measurable. And then the first order lag approximation to obtain boresight error rate is proposed. The proposed LOS rate calculation method can compensate the coupling effect by considering the rotations of missile and gimbal. The performance of the proposed method is verified via full nonlinear 6-DOF(Degree of Freedom) simulations.

• International Journal of High-Rise Buildings
• /
• v.8 no.2
• /
• pp.101-106
• /
• 2019

Assessing the energy performance of supertall buildings often does not consider variations in energy consumption due to the change of environmental conditions such as temperature, pressure, and wind speed associated with differing elevations. Some modelers account for these changing conditions by using a conventional temperature lapse rate, but not many studies confirm to the appropriateness of applying it to tall buildings. This paper presents and discusses simulated annual energy consumption results from a 600 m tall skyscraper floor plate located in Dubai, UAE, assessed using ground level weather data, a conventional temperature lapse rate of $6.5^{\circ}C/km$, and more accurate simulated 600 m weather data. A typical office floorplate, with ASHRAE 90.1-2010 standards and systems applied, was evaluated using the EnergyPlus engine through the OpenStudio graphical user interface. The results presented in this paper indicate that by using ground level weather data, energy consumption at the top of the building can be overestimated by upwards of 4%. Furthermore, by only using a lapse rate, heating energy is overestimated by up to 96% due to local weather phenomenon such as temperature inversion, which can only be conveyed using simulated weather data. In addition, sizing and energy consumption of fans, which are dependent both on wind and atmospheric pressure, are not accurately captured using a temperature lapse rate. These results show that that it is important, with the ever increasing construction of supertall buildings, to be able to account for variations in climatic conditions along the height of the building. Adequately modeling these conditions using simulated weather data will help designers and engineers correctly size mechanical systems, potentially decreasing overall building energy consumption, and ensuring that these systems are able to provide the necessary indoor conditions to maintain occupant comfort levels.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.31 no.2
• /
• pp.156-172
• /
• 2021

Objectives: To investigate the trends of industrial injuries among long-term health care workers in Korea Methods: T7866 injuries were selected from the total industrial injuries approved by the Industrial Accident Compensation Insurance Act(Occupational Safety and Health Act) among long-term health care workers between 2007 and 2016 in Korea. We analyzied the trends of industrial injuries according to work process, occurrence type, and causes. Results: The industrial injuries among long-term health care workers increased since 2012. The mostly occurred area for industrial injuries were low back areas, which is related that the most serious industrial injuries occurred when the one long-term healthcare worker lift manually the recipient, from bed(ondol, Korean floor heating system) to a wheelchair, bed to bath bed, and wheelchair to bath chair. In addition to this, lack of workforce, increased work intensity due to overwork contributed the increasing of occupational injury. Conclusions: This study suggests that the main causes of industrial injuries were Lack of facilities and equipment for small private long-term care institutions, The physical load that goes into lifting the recipient directly, work intensity such as excessive workload and increased work speed. We suggest that the social publicization of long-term care service for the elderly, avoiding ways to lift recipients directly, introducing lifting machines as well as improving working methods, and reducing the workload of caregivers are required.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.6
• /
• pp.1154-1162
• /
• 2020

In this study, the soft textile actuator is produced for a smart wearable with the shape memory effects from linear shape memory alloys of Nickel and Titanium using the driving force through the fabrication process. The measurement model was designed to measure dynamic characteristics. The heating method, and memory shape of the linear shape memory alloy were set to measure the operating temperature. A shape memory alloy at 40.13℃, was used to heat the alloy with a power supply for the selective operation and rapid reaction speed. The required amount of current was obtained by calculating the amount of heat and (considering the prevention of overheating) set to 1.3 A. The fabrication process produced a soft textile actuator using a stitching technique for linear shape memory alloys at 0.5 mm intervals in the general fabric. The dynamic characteristics of linear shape memory alloys and actuators were measured and compared. For manufactured soft textile actuators, up to 0.8 N, twice the force of the single linear shape memory alloy, 0.38 N, and the response time was measured at 50 s.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.8 no.3
• /
• pp.131-150
• /
• 1979

Recently only a few correlations between various factors due to the different grades of surface roughness for the nucleate pool boiling have been proposed. The main purpose of this work is to test the validity of these types of correlations between related factors to nucleate pool boiling phenomena. The boiling experiments using distilled water were carried out at the heat flux ranging from $7.4\times10^4\;to\;2.4\times10^5kcal/m^2h$ on the sintered porous metal surface with the cavity diameter of 10, n, 40, 70, $100{\mu}$, respectively, at the atmospheric pressure, To determine the bubble sizes, number of nucleation sites, delay and growth time, frequency of bubble emission and rising velocities of bubbles, the high speed motion picture technique was employed. In the correlation $f{\propto}D_b^n$, where f denotes frequency of bubble emission and $D_b$ departure diameter, n, the power factor of $D_b$, have been found to be from -2 to -10/3. The correlation C in the correlation between heat flux q and density of nucleation sites $\frac{N}{A}$, $q=C(\frac{N}{A})^n$, was appeared to be more crucial than the power factor n. The correlation of the heat flux q to the temperature difference ${\Delta}T$ and the density of nucleation sites$\frac{N}{A}$, was proposed to be $$q-460{\Delta}T^{\frac{5}{4}}=K{\Delta}T{\frac{5}{3}}(\frac{N}{A})^{\frac{2}{3}}$$. The values of heat transfer coefficient obtained in this experiments for the porous sintered metal surface appeared to be very high in comparison with the formerly obtained results for the other surfaces.