The non-staggered(collocated) grid approach in which all the solution variables are located at the centers of control volumes is very popular for incompressible flow analyses because of its numerical efficiency on the curvilinear or unstructured grids. Rhie and Chow's paper is the first in using non-staggered grid method for SIMPLE algorithm, where pressure weighted interpolation was used to prevent decoupling of pressure and velocity. But it has been known that this non-staggered grid method has stability problems when pressure fields are nonlinear like in natural convection flows. Also Rhie-Chow scheme generates large numerical diffusion near curved walls. The cause of these unwanted problems is too large pressure damping term compared to the magnitude of face velocity. In this study the magnitude of pressure damping term of Rhie-Chow's method is limited to 1∼10% of face velocity to prevent physically unreasonable solutions. The wall pressure extrapolation which is necessary for cell-centered FVM is another source of numerical errors. Some methods are applied in a unstructured FV solver and analyzed in view of numerical accuracy. Here, two natural convection problems are solved to check the effect of the Rhie-Chow's method on numerical stability. And numerical diffusion from Rhie-Chow's method is studied by solving the inviscid flow around a circular cylinder.
Using a fiber laser heat source, an oil pressure sensor was fabricated to measure the pressure in commercial vehicles. A stepping motor was used for the rotational and translational motion in the diaphragms and hardware joining. Laser welding process algorism including shielding gas control and vision system was integrated by using LabVIEW software for the high quality welding and in-line monitoring purpose. For the maximum flexibility in pressure transmission to the pressure sensor, thin sheet metal diaphragm, $25{\sim}50{\mu}m$(SUS-316L), was used and the diaphragms were optimally designed with FEM analysis. The welded samples were cross-sectioned the observation showed that the maximum depth ratio was more than seven times of diaphragms. The maximum welding speed was measured to be as high as 50in/mm by the developed automation mechanism. The fabricated prototypes were tested for the proof pressure, spring constant and sealing. The FEM results of spring constant measurement was as accurate as up to 80% of the design value and the sensor was safely operated up to the nominal pressure of 10bars.
One dimensional (1D) grating has been fabricated (using focused ion beam) on 50 nm gold (Au) film deposited on higher refractive index Gallium phosphate (GaP) substrate. The sub-wavelength periodic metal nano structuring enable to couple photon to couple with the surface plasmons (SPs) excited by them. These grating devices provide the efficient control on the SPs which propagate on the interface of noble metal and dielectric whose frequency is dependent on the bulk electron plasma frequency of the metal. For a fixed periodicity (${\Lambda}=700 nm$) and slit width (w = 100 nm) in the grating device, the efficiency of SPP excitation is about 40% compared to the transmission in the near-field. Efficient coupling of SPs with photon in dielectric provide field localisation on sub-wavelength scale which is needed in Heat Assisted Magnetic recording (HAMR) systems. The GaP is also used to emulate Vertical Cavity Surface emitting laser (VCSEL) in order to provide cheaper alternative of light source being used in HAMR technology. In order to understand the underlying physics, far-and near-field results has been compared with the modelling results which are obtained using COMSOL RF module. Apart from this, grating devices of smaller periodicity (${\Lambda}=280nm$) and slit width (w = 22 nm) has been fabricated on GaP substrate which is photoluminescence material to observe amplified spontaneous emission of the SPs at wavelength of 805 nm when the grating device was excited with 532 nm laser light. This observation is unique and can have direct application in light emitting diodes (LEDs).
Twenty $Pelibuey{\times}Katahdin$ ewes ($35{\pm}2.3kg$) were used to determine the effects of the consumption of standardized plant extract containing a mixture of quaternary benzophenanthridine alkaloids and protopine alkaloids (QBA+PA) on growth performance, dietary energetics, visceral mass, and ruminal epithelial health in heat-stressed ewes fed with a high-energy corn-based diet. The basal diet (13.9% crude protein and 2.09 Mcal of net energy [NE] of maintenance/kg of dry matter) contained 49.7% starch and 15.3% neutral detergent fiber. Source of QBA+PA was Sangrovit RS (SANG) which contains 3 g of quaternary benzophenathridine and protopine alkaloids per kg of product. Treatments consisted of a daily consumption of 0 or 0.5 g SANG/ewe. Ewes were grouped by weight and assigned to 10 pens (5 pens/treatment), with two ewes per pen. The experimental period lasted 70 days. The mean temperature humidity index during the course of this experiment was $81.7{\pm}1.0$ (severe heat stress). There were no treatment effects on water intake. Dry matter intake was not affected (p = 0.70) by treatments, but the group fed SANG had a numerically (11.2%) higher gain in comparison to the control group, SANG improved gain efficiency (8.3%, p = 0.04), dietary NE (5.2%, p<0.01) and the observed-to-expected NE (5.9%, p<0.01). Supplemental SANG did not affect ($p{\geq}0.12$) carcass characteristics, chemical composition of shoulder, and organ weights (g/kg empty body weight) of stomach complex, intestines, and heart/lung. Supplemental SANG decreased liver weight (10.3%, p = 0.02) and increased visceral fat (16.9%, p = 0.02). Rumen epithelium of ewes fed SANG had lower scores for cellular dropsical degeneration (2.08 vs 2.34, p = 0.02), parakeratosis (1.30 vs 1.82, p = 0.03) and neutrophil infiltration (2.08 vs 2.86, p = 0.05) than controls. It is concluded that SANG supplementation helped ameliorate the negative effects of severe heat on growth performance of feedlot ewes fed high-energy corn-based diets. Improvement in energetic efficiency may have been mediated, in part, by anti-inflammatory effects of supplemental SANG and corresponding enhancement of nutrient uptake.
친환경 에너지원으로 고려되고 있는 천연가스의 수요가 증가하고 있고 이와 동시에 천연가스의 공급을 위한 대규모 파이프라인의 시장 규모 또한 지속적으로 증가하고 있다. 하지만, 이러한 대규모 파이프라인의 부식은 천연가스 운송의 효율성을 저하시킨다. 이에 본 연구는 천연가스 공급용 대규모 파이프라인을 위한 에너지 자립형 고효율 부식방지 기술에 대한 특허의 정량분석을 통해 관련 기술의 특허권 확보을 위한 전략을 수립하는데 목적을 두고 있다. 본 특허 기술동향 조사에서는, 2018년 6월까지 출원, 공개 및 등록된 한국, 미국, 일본 및 유럽 특허를 대상으로 분석하였으며, 전문가토의를 거쳐 기술분류체계 및 분류기준을 마련하였다. 천연가스 대규모 파이프라인의 부식방지를 위한 외부전원으로 연료전지를 이용하기 위해, 1) 파이프라인의 분기 구조와 설비 설계(감압기/압축기/열교환기) 그리고 2) 고압 천연가스의 감압/예열과 가압/냉각 기술을 구비하는 에너지 제어 시스템 및 방법으로 권리화를 시도해 볼 수 있을 것으로 기대된다.
Grafting of fruit-bearing vegetables has been widely used to increase the resistance to soil-borne diseases, to increase the tolerance to low temperature or to soil salinity, to increase the plant vigor, and to extend the duration of economic harvest time. After grafting, it is important to control the environment around grafted seedlings for the robust joining of a scion and rootstock. Usually the shading materials and plastic films are used to keep the high relative humidity and low light intensity in greenhouse or tunnel. It is quite difficult to optimally control the environment for healing and acclimation of grafted seedlings under natural light. So the farmers or growers rely on their experience for the production of grafted seedling with high quality. If artificial light is used as a lighting source for graft-taking of grafted seedlings, the light intensity and photoperiod can be easily controlled. The purpose of this study was to develop a prototype system for the graft-taking enhancement of grafted seedlings using artificial lighting and to investigate the effect of air current speed on the distribution of air temperature and relative humidity in a graft-taking enhancement system. A prototype graft-taking system was consisted by polyurethane panels, air-conditioning unit, system controller and lighting unit. Three band fluorescent lamps (FL20SEX-D/18, Kumho Electric, Inc.) were used as a lighting source. Anemometer (Climomaster 6521, KANOMAX), T-type thermocouples and humidity sensors (CHS-UPS, TDK) were used to measure the air current speed, air temperature and relative humidity in a graft-taking system. In this system, air flow acted as a driving force for the diffusion of heat and water vapor. Air current speed, air temperature and relative humidity controlled by a programmable logic controller (UP750, Yokogawa Electric Co) and an inverter (MOSCON-G3, SAMSUNG) had an even distribution. Distribution of air temperature and relative humidity in a graft-taking enhancement system was fairly affected by air current speed. Air current speed higher than 0.1m/s was required to obtain the even distribution of environmental factors in this system. At low air current speed of 0.1m/s, the evapotranspiration rate of grafted seedlings would be suppressed and thus graft-taking would be enhanced. This system could be used to investigate the effects of air temperature, relative humidity, air current speed and light intensity on the evaportranspiration rate of grafted seedlings.
고압나트륨등(high-pressure sodium, HPS 램프)은 작물 생육 발달에 필요한 충분한 양의 광합성유효방사를 제공하는 동시에 복사열을 통해 온실 난방 부하를 절감할 수 있어 겨울철 시설원예 보광 조명으로 널리 이용되고 있다. 그러나 겨울철에 생육 중기를 맞이하는 시설 과채류의 경우, 작물의 정단부가 복사열에 영향을 많이 받고, 캐노피 위치에 따라 엽온 차이가 증가될 수 있다. 또한 온실 기온 역시 보광등에서 발생한 열이 상부로 상승 및 정체되면서 불필요한 에너지 낭비 및 온도 불균일성 역시 심화될 수 있다. 따라서 본 연구의 목표는 CFD 열전달 해석을 통해 HPS 램프에 의한 열적 특성 및 생육 단계별 수평적 엽온 변화를 분석하고, 온실 내 수직적 기온 및 작물의 캐노피별 엽온을 측정하여, 온실 내 환경 균일성 제고 및 효과적 에너지 활용 방안을 모색하는 것이었다. 생육 초기, 중기, 및 후기를 대변하는 초장(1.0, 1.6, 2.2m)에서의 정단부 수평적 엽온을 CFD 시뮬레이션을 통해 분석하였다. 또한 HPS 램프 작동 이후 수직적 기온과 캐노피 높이별 엽온을 측정하였다. 실험 결과, 보광 시 엽온과 기온 간의 차이가 커지고, 수직적 기온 역시 불균일해짐을 알 수 있었다. 생육 단계가 진전될수록, 고온의 복사열이 중심부에 집중되며, 상단부 수평적 엽온 편차가 커지고, 균일성 역시 떨어지는 것을 알 수 있었다. 열획득 모델을 통한 수치해석 결과, 보광등이 2022년12월 기간 난방부하에 약 50.1% 기여하는 것을 알 수 있었다. 평균절대오차 및 평균제곱근 오차는 생육 초기 및 생육 중기 모두0.5 이하로, 실측값과 예측값에 높은 일치도를 보였다. 수직적 기온 및 엽온 분포와 생육 단계별 수평적 엽온 분포에 관한 본 연구의 결과는 효율적 에너지 관리 및 작물 생육 발달에 관한 의사결정에 도움이 될 수 있을 것으로 생각된다.
International Journal of Industrial Entomology and Biomaterials
/
제26권2호
/
pp.89-94
/
2013
Entomopathogenic fungal species have been investigated for their potential use as biological control agents owing to their natural role as insect pathogens. These fungi produce a wide range of secondary metabolites with high therapeutic values, such as antibiotics and cytotoxic substances. To evaluate the antibacterial activity of entomopathogenic fungi, 10 isolates from Korean soil were selected and tested for their activity against Escherichia coli by using fungal culture filtrates. Antibacterial activity was assessed using a two-step process: (1) a screening assay for the selection of fungal isolates and (2) a quantitative assay to evaluate the activity of select fungi. Although 4 fungal isolates were selected through the screening assay, only 3 fungal isolates, from Beauveria bassiana and Metarhizium anisopliae, showed high antibacterial activity according to the quantitative assay. The antibacterial activity of selected fungal culture filtrates was stable when exposed to heat and proteolytic enzyme treatments, which indicated that the antibacterial compound is not a protein. These entomopathogenic fungal metabolites might be useful as a source for bacterial control and in the pharmaceutical industry.
현재 도시의 도시열섬현상을 완화시키는 방안으로 도시 녹화사업 및 연구가 주목 받고 있다. 이 연구에서는 질소고정균을 분리하고, 식물 성장에 미치는 영향을 확인했다. 먼저 질소고정 균을 분리하기 위해, 질소원이 없는 배지에서 enrichment를 실시했고, 질소원이 제한된 배지에서 높은 성장을 보인 colony를 분리하여 순수분리 했다. 순수 분리된 균은 ARA를 통해 acetylene이 90% 이상 감소되고, ethylene 생성을 통해 nitrogenase의 활성을 간접적으로 확인했다. 재현성이 확인된 Cedecea sp. MK7과 Enterobacter sp. Y8을 선별했다. 선별된 질소고정 균을 perennial rye grass의 성장에 적용한 결과 건조중량이 18.65 mg인 대조군에 비해 34.80 mg (186.60%)으로 증가한 것을 확인했다. 식물 성장 후, 질소고정 균이 접종된 토양의 미생물 군집 분석은 대조군과 유사했다. 따라서 본 연구에서는 도시녹화 시스템에 질소고정 균을 이용하여 식물 성장을 촉진한다면 그 효율이 증대될 것이다.
This study was conducted to utilize the wastes produced from thinning the forest as a roughage source for ruminants. Four ruminally cannulated Korean steers were used to investigate the ruminal fermentation characteristics and blood concentrations of stress-related hormones. Treatments were composed of the rice straw only (Control) and the 30% pine silage plus 70% rice straw(Pine silage) as roughages. The experiment was conducted with four replicates by a double tum over design. For sampling of blood under high temperature steers were accommodated in respiratory chamber. Concentrations of ruminal pH, volatile fatty acids and ammonia were not affected by substitution of pine silage. Mean concentration of blood thyroxine was significantly(P < 0.01) lower in the pine silage than the control. However, blood cortisol concentration was not affected by substitution of pine silage, even though it was significantly(P < 0.05) decreased after exposure for 6 hrs in high temperature. It was concluded that the pine silage using the wastes produced from thinning the forest could be use as a substitute roughage for reduction of heat stress in ruminant.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.